Best Spark Plug Gap Tool Under $15 (2026)
Spark plug gap tools for mower and tractor plugs, compared by stated range, scale, pack size and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallUcreative Gap Tool9.5/10View on Amazon - 2
Best Grip GaugeA and E 4450A9.4/10View on Amazon - 3
Best Wire GaugeNYTKL Wire Gauge9.4/10View on Amazon - 4
Best 3-PackHarrier 3-Pack9.4/10View on Amazon
A mower that cranks and dies, or one that runs rough after a plug change, often comes back to the gap. The plug fires across a tiny space, and when that space is wrong the engine misses or will not start at all. A best spark plug gap tool under 15 sets that space right on a mower, tractor or trimmer engine, and the picks below are grip gauges, wire gauges and coin gauges, compared here on the stated range, scale, pack size and warranty from each listing.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall Ucreative Gap Tool: Highest Acre Score here: gap tool plus feeler gauge for 10mm to 16mm plugs, 1-year warranty Check price on Amazon
- Best Grip Gauge A and E 4450A: E-Z grip with pocket clip, electrode recess and a 1-year warranty Check price on Amazon
- Best Wire Gauge NYTKL Wire Gauge: Zinc alloy wire gauge, 0.020 to 0.100 inch, 1.5 inch round Check price on Amazon
- Best 3-Pack Harrier 3-Pack: 3 coin gauges with SAE and metric scales, 0.02 to 0.1 inch Check price on Amazon
Our acreage picks

Ucreative Spark Plug Gap Tool with Feeler Gauge, 10mm to 16mm
Gap tool with a feeler gauge for 10mm, 12mm, 14mm and 16mm plugs, with a knob that closes the gap.
The Ucreative tool pairs a gapping tool with a feeler gauge for 10mm, 12mm, 14mm and 16mm spark plugs. The plug sits on the tool, the feeler gauge thickness is chosen, and the knob turns until the side electrode compresses to the gap. It does not fit 18mm thread plugs, or long reach or short reach plugs.
Pros
- Gap tool plus feeler gauge in the pack
- Fits 10mm, 12mm, 14mm and 16mm plugs
- Knob closes the gap to the chosen thickness
- 1-year manufacturer warranty stated
Cons
- Not compatible with 18mm thread plugs
- Does not open a gap, only closes it
- No weight or dimensions are stated
- Electrodes may spring back, per the listing

A and E Hand Tools 4450A E-Z Grip Spark Plug Gap Gauge
E-Z grip gap gauge with a pocket clip, a metric scale on the reverse and a recess for adjusting electrodes, with a 1-year warranty.
The A and E 4450A is an E-Z grip gap gauge with a pocket clip, a metric gapping scale on the reverse side and a recess made to adjust electrodes. It measures 7.7 x 3.4 x 0.5 in, weighs 0.04 lb, and carries a 1-year warranty on material and workmanship.
Pros
- Pocket clip for carrying
- Metric gapping scale on the reverse side
- Recess made to adjust electrodes
- 1-year warranty on material and workmanship
Cons
- No gap range is stated
- Largest here at 7.7 x 3.4 x 0.5 in
- No feeler gauge is included

NYTKL Spark Plug Measuring Tool, Wire Gap Gauge, 0.020 to 0.100 Inch
Wire spark plug gap gauge scaled from 0.020 to 0.100 inch, in zinc alloy, round at 1.5 inches in diameter.
The NYTKL gauge is a round wire gap gauge scaled from 0.020 to 0.100 inch, made from zinc alloy with precision-cut grooves along the edges. The listing describes a polished surface, rounded edges and a diameter of about 1.5 inches.
Pros
- Wire gauge scaled from 0.020 to 0.100 inch
- Zinc alloy, corrosion-resistant and wear-resistant
- Round shape with precision-cut grooves for grip
- Polished surface and rounded edges
Cons
- Warranty field reads 0.2, with no term stated
- No weight is stated
- Wire gauge only, no feeler gauge included
- Listing repeats its compact and portable paragraph twice

Harrier Hardware 3-Pack Spark Plug Gap Gauge Coin Tool, SAE and Metric
3-pack of coin-style spark plug gap gauges with SAE and metric scales, from 0.02 to 0.1 inch and 0.5mm to 2.5mm.
The Harrier Hardware pack holds 3 coin-style gap gauges with a dual scale: SAE from 0.02 to 0.1 inch and metric from 0.5mm to 2.5mm. The listing describes clear engraved markings on both scales and a punched hole for a keychain or workshop hook.
Pros
- 3 gauges in the pack for sharing or spares
- Dual scale: SAE 0.02 to 0.1 inch and metric 0.5mm to 2.5mm
- Engraved markings on both scales
- Punched hole for a keychain or workshop hook
Cons
- No warranty term is stated
- No weight or dimensions are stated
- Coin gauges measure only; no gap tool is included
- Only sold as a 3-pack, no smaller pack is listed

K Tool International Universal Spark Plug Gap Gauge Tool KTI73701
Universal coin-type spark plug gap gauge, measuring in increments of one thousandth from .020 to .100, with a hole for storage.
The K Tool KTI73701 is a circular coin-type gap gauge that measures in increments of one thousandth from .020 to .100. The listing says it gauges and gaps all types of spark plugs, with an easy to read scale and a hole punched for storage. It measures 2.0 x 0.8 x 0.3 in and weighs 0.05 lb.
Pros
- Measures in increments of one thousandth from .020 to .100
- Gauges and gaps all types of spark plugs
- Circular coin type with a hole for storage
- Easy to read scale
Cons
- Warranty reads Manufacturer Warranty, no term stated
- No feeler gauge is included
- No metric scale is stated
- No grip or electrode recess is stated
Other machines to compare
CTA Tools 3238 9 Wire Spark Plug Gap GaugeCheck price on Amazon
Spark Plug Gap Tool 2-in-1 Set with 32PCS Feeler GaugeCheck price on Amazon
CTA Tools 3235 Spark Plug Gapper: Coin-Style Spark Plug GapCheck price on Amazon
Spark Plug Gap ToolCheck price on Amazon
Spark Plug TesterCheck price on Amazon
Side-by-side specs
| Model | Acre Score | Type | Range | Scale | Size | Pack | Warranty |
|---|---|---|---|---|---|---|---|
| Ucreative Gap Tool | 9.5/10 | Gap tool with feeler gauge | 10mm to 16mm | Feeler gauge | Not stated | 1 | 1 year |
| A and E 4450A | 9.4/10 | Grip gauge | Not stated | Metric on reverse | 7.7 x 3.4 x 0.5 in | 1 | 1 yr |
| NYTKL Wire Gauge | 9.4/10 | Wire gauge | 0.020 to 0.100 in | Wire | 1.5 in diameter | 1 | Not stated |
| Harrier 3-Pack | 9.4/10 | Coin gauge | 0.02 to 0.1 in | SAE and metric | Not stated | 3 | Not stated |
| K Tool KTI73701 | 9.4/10 | Coin gauge | .020 to .100 in | Coin, one thousandth | 2.0 x 0.8 x 0.3 in | 1 | Not stated |
These figures are rated by the manufacturer and shown as listed, on 11 November 2026.
Acreage and terrain fit
Ucreative Gap Tool
A and E 4450A
NYTKL Wire Gauge
Harrier 3-Pack
K Tool KTI73701
How the picks were scored
The Acre Score weighs performance, build, value, safety and warranty. A factor the listing does not state earns no points, and no listing here states a safety feature, so every pick earns no points on safety.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Ucreative Gap Tool | 9.5 | 30 | 20 | 21 | 0 | 2 |
| A and E 4450A | 9.4 | 26 | 19 | 19 | 0 | 2 |
| NYTKL Wire Gauge | 9.4 | 28 | 21 | 20 | 0 | 0 |
| Harrier 3-Pack | 9.4 | 27 | 19 | 21 | 0 | 0 |
| K Tool KTI73701 | 9.4 | 27 | 19 | 19 | 0 | 0 |
Acre Scores are spread from 9.2 up to 9.8, and each weighted total takes its place on that spread proportionally, so the mower with more points is always shown above the one with fewer.
Best spark plug gap tool under 15 buying guide
Wire gauge vs coin gauge vs grip gauge
The NYTKL is a wire gauge, the Harrier and K Tool are coin gauges, and the A and E is a grip gauge, while the Ucreative is a gap tool with a feeler gauge. A wire gauge slides between the electrodes, a coin gauge reads the gap on its edge, and the Ucreative tool closes the gap with a knob.
Gap range and scale
Ranges here run from 0.020 to 0.100 inch on the NYTKL and K Tool gauges, and 0.02 to 0.1 inch on the Harrier pack, with a metric side from 0.5mm to 2.5mm. The Ucreative tool fits 10mm, 12mm, 14mm and 16mm plugs and warns it does not fit 18mm thread plugs. The A and E gauge states a metric scale on the reverse but no range.
Feeler gauge vs gauge alone
Only the Ucreative pick includes a feeler gauge, and its listing suggests a 0.42mm feeler for a 0.44mm gap because electrodes may spring back. The other picks measure the gap, except the A and E gauge, which has a recess made to adjust electrodes.
Warranty
The A and E gauge states 1 year on material and workmanship, and the Ucreative tool states 1 Year Manufacturer. The NYTKL field reads 0.2 with no term, the K Tool reads Manufacturer Warranty with no term, and the Harrier states no warranty at all.
Pack size
The Harrier pick is a 3-pack, while each of the other picks holds 1 tool. A 3-pack suits a shop that wants a spare gauge in the toolbox, while one tool suits a tune-up kit that already holds the rest of the gear.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- Tune-ups: the Ucreative tool fits 10mm, 12mm, 14mm and 16mm plugs.
- Storage: the K Tool coin gauge is 2.0 x 0.8 x 0.3 in with a hole for storage, and the Harrier gauges have a punched hole for a hook.
- Field repairs: the A and E gauge has a pocket clip, and the NYTKL wire gauge is round at 1.5 inches in diameter.
- Backups on hand: the Harrier 3-pack gives a spare gauge for the toolbox, per the listing.
FAQ: mowing large lots
What is a spark plug gap tool?
A spark plug gap tool measures the space between the electrodes of a spark plug, and some also adjust it. The picks here include wire gauges, coin gauges, a grip gauge and a gap tool with a feeler gauge.
What gap should a mower spark plug have?
The listings state tool ranges, not engine gap settings. Check the mower or engine manual for the plug gap, then pick a gauge that covers it.
How does a spark plug gap tool work?
Place the gauge between the electrodes to read the gap, then adjust the side electrode until it reads the wanted gap. The Ucreative listing describes the steps: place the plug on the tool, choose the feeler gauge thickness, then turn the knob until the electrode compresses to the gap.
Does gapping a spark plug need a feeler gauge?
A wire or coin gauge can measure the gap on its own, and the NYTKL, Harrier and K Tool picks are gauges without a feeler gauge. Only the Ucreative pick includes a feeler gauge, and its listing suggests a 0.42mm feeler for a 0.44mm gap.
More mowing guides
- Best Spark Plug Gap Tool (2026)
- Best Magnetic Spark Plug Socket Set (2026): 5 Picks for Mower Plugs
- Best Deep Spark Plug Socket Set (2026): Mower Plug Picks
- Best Spark Plug Socket 14 mm (2026): 5 Picks for Plug Changes
- Best Spark Plug for Briggs and Stratton (2026): 5 Plugs Compared
- Best Spark Plug for Kohler Engine (2026)
- Types of Spark Plugs for Lawn Mowers
- Spark Plug Problems: Signs and Fixes
- How to Check Spark Plug on a Lawn Mower
- Best Gas Lawn Mower Tune Up Kit (2026): 5 Picks for Spring Startup




