Bow Rake Uses: What Jobs It Handles in Your Yard
A bow rake levels soil and gravel, spreads mulch and topsoil, clears thatch and leaves, and works around beds and paths.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Truper Tru Tough 16-Tine Welded Bow Rake9.6/10View on Amazon - 2
HRADHOL Bow Rake9.6/10View on Amazon - 3
GlimHirvox Modular Lawn Leveling Rake9.7/10View on Amazon
A bow rake is the yard tool for moving loose material with its steel tines and smoothing it flat with the back of its head. Bow rake uses cover leveling soil and gravel, spreading mulch and topsoil, clearing thatch and leaves, and shaping beds and paths. This guide walks through each job, the head and handle to pick for it, and how to work without wearing yourself out.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Bow rake uses: what the tool does
A bow rake has a steel head with tines on one side and a flat back on the other, set on a long handle. The tines break up and gather loose material, and the flat back smooths it. The rakes below show the range: heads from 16 to 17 inches wide, 15 to 17 tines, and handles in ash or stainless steel. The MQHUAYU head is double-sided, with one side for loosening soil and clearing thatch and the other for leveling gravel, mulch and flower bed surfaces.
| Rake | Head width | Tines | Handle |
|---|---|---|---|
| MQHUAYU 63 inch | 17 inches | 17 steel tines | Stainless steel, telescopic |
| Razor-Back 16 inch | 16 inches | 15 tines | 60 inch ash |
| A.M. Leonard 16.5 inch | 16.5 inches | 16 tines | Northern Ash |
See the tillers and cultivators section for soil-working tools that go deeper than a rake can reach.
Level soil and gravel
Use the tines to break up high spots and the back of the head to smooth the surface. Work in short pulls toward you, then fill the low spots with a little more material and smooth again. The MQHUAYU rake (on Amazon) levels gravel, mulch and flower bed surfaces with the flat side of its double-sided head, and its 17 inch wide head covers a wide path with each pass. For a lawn or a bed, level in thin layers rather than moving a deep pile at once, so the finished surface stays even. A gravel drive or path is the same job: pull the high spots down, fill the ruts, and smooth the top.
Spread mulch and topsoil
Dump mulch or topsoil in small piles, then pull it out with the tines and smooth it with the back of the head. The tines spread the material and break up clumps, while the flat back leaves an even layer. The maker states the A.M. Leonard rake (on Amazon) has curved teeth with more grabbing power than straight tines, which helps when the pile is heavy. Work from the far side toward you so you do not walk on the finished layer, and keep the layer even by checking it as you go.
Clear thatch and leaves
Thatch is the mat of dead grass and stems that builds up on a lawn, and a bow rake pulls it out with its tines. Rake the lawn in short strokes to lift the thatch, then gather it into piles and haul it off. The MQHUAYU rake clears thatch with one side of its double-sided head and collects fallen leaves with its 17 steel tines. For leaves, rake them into rows and then into piles, working with the wind where you can. A bow rake also clears light debris from beds and paths after a storm.
Shape beds and paths
Use the flat back of the head to shape the edge of a bed or to smooth a gravel path. The tines pull material out of the bed and the back presses it into place. The MQHUAYU rake levels flower bed surfaces, and its telescopic stainless steel handle adjusts to different body types, so you can work standing upright. Keep the edge line straight by working along a string line or the edge of the path, and finish by smoothing the top of the bed.
Pick the right head and handle
Head width sets how much ground each pass covers: the rakes here run from 16 to 17 inches wide, with 15 to 17 tines. A wider head with more tines moves more material, while a narrower head fits between plants and along edges. Handles run from ash to stainless steel: the Razor-Back and A.M. Leonard rakes use ash handles, the Razor-Back at 60 inches and the A.M. Leonard with a solid lacquered Northern Ash handle, while the MQHUAYU uses a telescopic stainless steel handle. The A.M. Leonard head is one piece, forged and welded into the socket, with a 14-gauge socket riveted all the way through to the handle. The MQHUAYU head unscrews with four bolts for storage. Pick a handle that fits your height, and check that the head stays tight on the handle before you start.
Safety
Wear eye protection and sturdy shoes, and clear sticks, stones and other debris before you rake. Keep children, pets and bystanders away from the work area. A bow rake has steel tines, so carry it with the head down and store it with the tines facing a wall or down. See the Safety Disclaimer.
FAQ: mowing large lots
What is a bow rake used for?
Leveling soil and gravel, spreading mulch and topsoil, clearing thatch and leaves, and shaping beds and paths. The tines gather and break up loose material, and the flat back of the head smooths it.
What is the difference between a bow rake and a leaf rake?
A bow rake has short steel tines and a flat back for moving soil, gravel and mulch. A leaf rake has long, flexible tines made for gathering leaves without digging into the soil.
How wide should a bow rake head be?
The rakes here run from 16 to 17 inches wide, with 15 to 17 tines. A 16 or 16.5 inch head fits between plants and along edges, while a 17 inch head covers more ground with each pass.
Can a bow rake remove thatch?
Yes. The tines lift the mat of dead grass and stems from the lawn, and the MQHUAYU rake clears thatch with one side of its double-sided head. Rake in short strokes, gather the thatch into piles and haul it off.
What handle should a bow rake have?
Ash handles are the traditional choice: the Razor-Back has a 60 inch ash handle and the A.M. Leonard has a solid lacquered Northern Ash handle. The MQHUAYU uses a telescopic stainless steel handle that adjusts to different body types.




