Chainsaw Chain Repair Kit: What to Buy and How to Use
A chainsaw chain repair kit joins a broken chain with master links and a breaker, and the right one matches your chain pitch and gauge.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Hicello Pocket Chainsaw Breaker Kit with 10 Master Link Sets9.6/10View on Amazon - 2
DETYI Benchtop Chainsaw Chain Breaker Kit9.6/10View on Amazon - 3
Hariendny 30 Sets 3/8 in Chainsaw Chain Repair Links9.6/10View on Amazon
A chain that snaps halfway through a cut leaves a saw you cannot use until the chain is whole again. A chainsaw chain repair kit is the gear that puts it back together: master link straps and rivets that join the chain ends, plus a breaker tool that removes the damaged link. The right kit depends on the chain on your saw, so check the pitch and gauge before you order.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Hicello Pocket Chainsaw Breaker Kit with 10 Master Link Sets
Pocket chain breaker kit with 10 sets of 3/8 in master links for 050 and 058 gauge chains.
Who it's for: owners who want one kit that both breaks and joins a chain in the field.
Who should skip it: anyone who wants a benchtop tool, or anyone who needs more than 10 link sets on hand.
The Hicello kit is the only one here that pairs a breaker with link sets: a pocket breaker, a riveting needle, a base and 10 sets of 3/8 in master links. The maker lists fit for 1/4 in, 3/8 in LP, 325, 3/8 in and 404 pitch chains, with joiners for 050 and 058 gauge chains. The breaker is carbon steel and the joiners are metal, and the listing states the pocket breaker needs a separate hammer to work.
Pros
- Breaker and 10 link sets in one pocket kit
- Fits 1/4 in, 3/8 in LP, 325, 3/8 in and 404 pitch chains
- Carbon steel breaker with high strength and hardness, per the listing
- Joiners fit 050 and 058 gauge chains
Cons
- Needs a separate hammer; the breaker cannot work on its own
- Only 10 link sets, fewer than the 30-set strap kit here
- Warranty term is not stated on the listing
- Fits only the stated pitches; other chain sizes need a different kit

DETYI Benchtop Chainsaw Chain Breaker Kit
Benchtop chainsaw chain breaker kit with a hardened anvil, universal punch and 2 drill bits.
Who it's for: owners who break chains at the bench and want a solid anvil under the punch.
Who should skip it: anyone who also needs straps to join the chain, or anyone who wants a kit that fits in a pocket.
The DETYI kit is a benchtop breaker for removing rivets: a universal punch, a hardened tool steel anvil and 2 quenching drill bits, in a tool that measures 8.6 by 4.3 by 7.0 in. The maker says the anvil holds the chain sideplates during pressing and the handle is anti-slip. The maker gives two anvil counts, 1 and 2; check before ordering.
Pros
- Hardened precision anvil holds sideplates during pressing
- Handles stubborn, rusty or jammed chains, per the listing
- Anti-slip handle reduces hand fatigue
- Multi-functional anvil fits chains of various sizes
Cons
- No master links or straps included, so joining needs a separate kit
- Warranty term is not stated on the listing
- Benchtop size takes more storage space than a pocket kit
- Each rivet needs the punch aligned by hand before pressing

Hariendny 30 Sets 3/8 in Chainsaw Chain Repair Links
30 sets of 3/8 in stainless steel master link repair straps and rivets for 050 and 058 gauge chains.
Who it's for: owners who repair chains often and want a shelf stock of links.
Who should skip it: anyone who needs a breaker as well, or anyone with a chain pitch other than 3/8 in.
The Hariendny kit is 30 sets of 3/8 in master link straps and rivets in stainless steel. Each set holds preset linking straps and rivets, and the maker lists fit for 050 and 058 gauge chains across a variety of chainsaw brands. The straps slide over the end of each chain link to rejoin the chain.
Pros
- 30 sets cover repairs on more than one chain
- Stainless steel links, durable and long-lasting per the listing
- Preset straps and rivets in each set for fast repairs
- Fits 050 and 058 gauge chains across a variety of brands
Cons
- Joining only; removing a broken link still needs a breaker
- Only 3/8 in pitch chains; other pitches need another kit
- Warranty term is not stated on the listing
- A single broken chain uses one set, so most of the 30 sets sit in storage
What a chainsaw chain repair kit does
A repair kit covers the two halves of the job. The breaker takes out the damaged link by driving the rivet out, and the master link straps join the chain back into a loop. Some kits hold only straps, some only a breaker, and some hold both.
Pitch and gauge decide fit. Pitch is the distance between the rivets, and gauge is the thickness of the drive link that rides in the bar groove. A kit made for 3/8 in pitch and 050 and 058 gauge chains fits only chains with those measurements. See the guide on how to measure chainsaw chain size before you order.
Match the kit to your chain
Start with the chain, not the kit. Read the pitch and gauge off the old chain or the bar, then check them against the kit listing. A 3/8 in strap will not join a 325 pitch chain, and a 058 joiner will not sit right in a bar cut for a thicker gauge. The chainsaw chain sizes guide explains the measurements.
Brand matters less than measurement. The Hariendny straps (on Amazon) list fit across a variety of chainsaw brands, and the Hicello joiners list fit for STIHL and Oregon saws, but the pitch and gauge decide whether the link joins your chain. If the chain is worn past use, a repair kit will not bring it back: a stretched or cracked chain needs a new chain. See the chainsaw chain maintenance guide for routine care.
The gear for a chainsaw chain repair
Each of these three kits handles a different part of the repair: removing the broken link, joining the chain, or both in one box.
How to use a chainsaw chain repair kit
Work with the saw off and the chain off the bar, clean enough to see the rivets. Find the damaged link and mark the rivets on each side of it. The benchtop breaker does the first step: set the chain on the anvil, line the punch up with the rivet center, and press down smoothly until the rivet head comes free.
The Hicello pocket breaker covers the same first step in the field, with one difference the listing states plainly: it cannot work on its own, and you need a separate hammer to give the striking force. Compare the appearance, shape and size of the original chain parts before you order.
Joining is the second step. Slide a repair strap over the end of each chain link and reassemble the chain, as the Hariendny listing describes. Check that the new link sits flat and the chain moves freely around the bar.
Safety
Wear eye and hearing protection and sturdy gloves when you work on a chain, and keep children, pets and bystanders out of the work area. Clear debris from the bench before you start, and keep the saw off while your hands are on the chain. A breaker concentrates a lot of force on one rivet, so keep fingers clear of the punch and the anvil.
FAQ: mowing large lots
Can a master link repair a broken chainsaw chain?
Yes, if the rest of the chain is sound. A master link strap joins the two ends where the damaged link came out. If the chain is stretched or cracked in more than one place, a new chain is the right call instead.
What chain sizes do these repair kits fit?
The Hariendny straps fit 3/8 in pitch chains at 050 and 058 gauge. The Hicello kit (on Amazon) fits 1/4 in, 3/8 in LP, 325, 3/8 in and 404 pitch chains, with joiners for 050 and 058 gauge chains. The DETYI anvil (on Amazon) fits chains of various sizes, per the listing.
Do I need a chain breaker to repair a chain?
You need one to take the damaged link out, since the rivets have to come free before a strap can go in. The DETYI kit is a benchtop breaker for the shop, and the Hicello kit is a pocket breaker for the field that needs a separate hammer. The Hariendny kit holds straps and rivets only.
Can I carry a chain repair kit in the field?
The Hicello pocket kit is made for that: the listing calls it convenient and portable for garden work, and it holds the breaker and 10 sets of master links in one small kit. Bring a hammer for the pocket breaker.




