Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Electric Pressure Washer Parts: Replacements You May Need

A plain guide to the parts that wear out on an electric pressure washer and how to match a replacement to the machine at hand.

Electric Pressure Washer Parts: Replacements You May Need
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WOJET Self-Priming Pump 3400 PSI 2.5 GPMWOJET Self-Priming Pump 3400 PSI 2.5 GPM9.7/10View on Amazon
  2. 2Sooprinse Spray Wand 16 in 5000 PSISooprinse Spray Wand 16 in 5000 PSI9.6/10View on Amazon
  3. 3M MINGLE Spray Gun 40 in 4000 PSIM MINGLE Spray Gun 40 in 4000 PSI9.6/10View on Amazon
  4. 4Tatuo O-Ring Kit 50 PiecesTatuo O-Ring Kit 50 Pieces9.5/10View on Amazon

A washer that sputters, leaks where the wand meets the gun, or loses pressure on the driveway often needs a part replaced, not a new machine. Electric pressure washer parts cover the pump, the gun, the wand and the seals that join them, and each part handles a job of its own. This guide names the parts that wear out and shows how to match a replacement to the machine at hand.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

WOJET Self-Priming Pump 3400 PSI 2.5 GPM

WOJET Self-Priming Pump 3400 PSI 2.5 GPM

WOJET9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Replacement pump rated at 3400 PSI and 2.5 GPM, with a 3/4 in shaft and a hand-turn unloader.

Who it's for: owners whose pump has failed and whose engine matches the models the maker lists.

Who should skip it: anyone whose washer needs a different mount.

The WOJET pump is the part to order when pressure and flow are gone. The maker rates it at 3400 PSI and 2.5 GPM, with a 3/4 in shaft for engines from 180 to 225 cc, and it mounts directly to the engine crankshaft. Self-priming pickup draws water from a bucket, pool or tank, the hand-turn unloader adjusts pressure without a wrench, and a thermal relief valve guards against overheating.

Pros

  • Rated at 3400 PSI and 2.5 GPM
  • Self-priming pickup draws from a bucket, pool or tank
  • Hand-turn unloader, no wrench needed to adjust pressure
  • Die-cast aluminum body with a thermal relief valve

Cons

  • Mounts directly to the engine crankshaft only, with no other mounting
  • No warranty term is stated
  • Fits the engine models the maker lists, so check brand, model, PSI and GPM first
  • Garden hose inlet and M22 outlet only
Sooprinse Spray Wand 16 in 5000 PSI

Sooprinse Spray Wand 16 in 5000 PSI

Sooprinse9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Stainless steel replacement wand, 16 in long, rated at 5000 PSI, with an M22 inlet and a 1/4 in quick connect outlet.

Who it's for: owners who need more reach at the gun and whose gun head matches M22 14 mm.

Who should skip it: anyone who needs a longer lance.

The Sooprinse wand is a stainless steel lance, 16 in long, rated at 5000 PSI. The inlet is M22 14 mm and the outlet is a 1/4 in quick connect for spray tips and other accessories. It works on both gasoline and electric pressure washers, and the maker states a 3 years product warranty.

Pros

  • Rated at 5000 PSI, the highest pressure rating here
  • Stainless steel lance with a brass fitting
  • 1/4 in quick connect outlet fits spray tips
  • 3 years product warranty stated by the maker

Cons

  • Length is fixed at 16 in and cannot be extended
  • M22 14 mm inlet only, so check the gun head size before ordering
  • Only a single length is offered
  • Suits metric pressure washers, so check fit on other machines
M MINGLE Spray Gun 40 in 4000 PSI

M MINGLE Spray Gun 40 in 4000 PSI

M MINGLE9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Replacement trigger gun rated at 4000 PSI, with five nozzle tips and a length that changes from 40 in to 25 in or 8.8 in.

Who it's for: owners with an M22 hose who want a single gun with five tips and a length that changes.

Who should skip it: anyone with a garden hose connection, or anyone who has not measured the hose fitting first.

The M MINGLE gun replaces a worn trigger gun and adds five nozzle tips, with spray angles of 0, 15, 25, 40 and 65 degree. The maker rates it at 4000 PSI, and the length changes between 40 in, 25 in and 8.8 in. It takes an M22 14 mm or M22 15 mm fitting, and the 1/4 in quick connect takes nozzle tips and other accessories. A trigger lock helps avoid mishandling.

Pros

  • Rated at 4000 PSI with five nozzle tips
  • Length changes between 40 in, 25 in and 8.8 in
  • Trigger lock helps avoid mishandling
  • Works with gas and electric washers that use an M22 hose fitting

Cons

  • No warranty term is stated
  • Works only with pressure washer hoses with M22 thread, not garden hoses
  • Hose diameter should measure 22 mm, so measure before ordering
  • M22 15 mm fitting needs the brass coupler
Tatuo O-Ring Kit 50 Pieces

Tatuo O-Ring Kit 50 Pieces

Tatuo9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

50-piece NBR rubber O-ring kit in two sizes for 1/4 in, 3/8 in and M22 quick connect fittings.

Who it's for: owners chasing a leak at a quick connect joint who know the seal size they need.

Who should skip it: anyone who has not measured the old O-ring, or anyone who needs a size outside the two sizes here.

The Tatuo kit holds 50 O-rings in two sizes, 25 of each size, for 1/4 in, 3/8 in and M22 quick connect fittings. The small size measures 14.0 mm outside, 9.2 mm inside and 2.4 mm deep, and the large size measures 17.1 mm outside, 11.8 mm inside and 2.65 mm deep. The rings are NBR rubber, made to resist tear and abrasion, and they suit cold and hot water washers from -40 C to 120 C.

Pros

  • 50 pieces in two sizes, 25 of each size
  • Fits 1/4 in, 3/8 in and M22 quick connect fittings
  • NBR rubber resists tear and abrasion
  • Suits cold and hot water washers, from -40 C to 120 C

Cons

  • Only two sizes are included, so check O-ring size before buying
  • Small rings fit 1/4 in and M22 only, large rings fit 3/8 in only
  • The kit holds seals only, not wands, hoses or couplers
  • Each size has a fixed depth, 2.4 mm small and 2.65 mm large

Electric pressure washer parts: what wears out

The pump sets pressure and flow. When a pump will not build pressure, or it leaks at the body, the pump is the part to check. The gun controls the spray and holds the nozzle tips. The wand carries water from the gun to the nozzle, and a leaking lance shows up as spray at the joint. Seals sit inside the quick connect joints, and a worn seal lets water escape at the fitting even when the wand and hose look sound.

Start with the leak or the loss of pressure, then work back along the water path: seal, wand, gun, pump. Check seals before ordering a larger part.

How to match a replacement to your machine

Match the fitting first. The gun here works only with pressure washer hoses with an M22 thread, and it takes an M22 14 mm or M22 15 mm fitting, so check the fitting before ordering. The hose should measure 22 mm across. The guide on pressure washer hose sizes explains length and fitting shape.

Match pressure and flow next. The pump here is rated at 3400 PSI and 2.5 GPM, the gun at 4000 PSI, and the wand at 5000 PSI. Check the pump shaft size, which is 3/4 in here, and the engine models the maker lists for the pump, since it mounts directly to the engine crankshaft. For seals, measure the O-ring size before ordering.

The gear: electric pressure washer parts that handle each stage

Each part below handles a stage in the fix: the pump restores pressure and flow, the gun and wand carry the spray, and the seals stop leaks at the joints.

Safety

Never point a pressure washer at people or animals. Use gas units outdoors only, and keep children and pets out of the work area. Wear eye and hearing protection and clear debris from the surface before spraying. Refuel only with the engine off and cool.

FAQ: mowing large lots

Which electric pressure washer part should be checked when it leaks?

Check the seals first. The O-ring kit here holds 50 pieces in two sizes, and a worn seal at a joint can let water escape at the fitting.

How to tell which pump fits a washer?

Check the engine models the maker lists, the shaft size and the pressure and flow ratings. The pump here fits 3/4 in shaft engines from 180 to 225 cc, rated at 3400 PSI and 2.5 GPM.

What is the difference between an M22 14 mm fitting and an M22 15 mm fitting?

The 14 mm fitting suits Generac, Simpson, Briggs Stratton, Craftsman, Karcher and Ryobi washers, while the 15 mm fitting suits Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz and Excell washers. The 14 mm and 15 mm figures are the inside diameter of the fitting, and the hose diameter should measure 22 mm. Fittings can differ between models of the same brand, so check the fitting before ordering.

Can a spray wand fit both gas and electric pressure washers?

Yes. The wand here works on both gasoline and electric pressure washers, with an M22 14 mm inlet and a 1/4 in quick connect outlet. Check that the gun head matches, because the wand cannot be extended.

What size O-ring fits a quick connect joint?

Measure the old seal before ordering. The small O-ring measures 14.0 mm outside, 9.2 mm inside and 2.4 mm deep, and fits 1/4 in and M22 quick connect fittings. The large O-ring measures 17.1 mm outside, 11.8 mm inside and 2.65 mm deep, and fits 3/8 in quick connect fittings.

More mowing guides

More buying guides