How Much Does a Zero Turn Weigh?
A zero turn mower has no fixed weight: deck, frame, power and fuel set the figure, so read the maker weight for your exact model before you load or haul.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
WheelX Aluminum Loading Ramps 91 in 1900 lb Capacity with9.7/10View on Amazon - 2
HQSLC Heavy Duty Folding Loading Ramps 72.5 in 1500 lb9.6/10View on Amazon - 3
Evcitn 75 in 1500 lb Truck Loading Ramps9.7/10View on Amazon
How much does a zero turn weigh? There is no fixed figure that covers every mower on the market, because the weight follows the machine: deck width, frame size, engine or battery, fuel on board, and whatever is bolted on. The figure that matters is the one listed for your exact mower, so read it off the listing or the manual before you plan loading, hauling, or storage.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
How much does a zero turn weigh: the short answer
A zero turn mower has no standard weight. A residential machine with a smaller deck and a lighter frame sits at the light end of the range, while a commercial machine with a wide deck, a heavy frame, and a large engine sits at the heavy end. Battery machines carry their pack weight instead of fuel and engine weight, so the same deck size can still weigh a different amount between gas and battery power. The only figure you can trust is the weight the maker states for that exact model, with the deck and the power source it ships with.
What sets the weight
Deck width is the main driver. A wider deck means more steel, a longer frame, and bigger wheels and tires, and the weight climbs with it. Frame build matters too: a fabricated deck and a heavy tubular frame add weight over a stamped deck and a light frame. See our zero turn mower guides for the current roundups.
Power source is the next split. A gas machine carries an engine, a fuel tank, and fuel, so its weight changes with the tank level. A battery machine carries a battery pack, and the pack is a fixed part of the machine. Attachments add more: a bagger, a hitch, a mulching kit, or a suspension seat all add weight that the base figure leaves out, so add them in when you plan a load.
Where to find the weight
Start with the listing or the maker page for your exact model. Look for a spec table and read the weight line as stated, then note what it covers: some listings state a shipping weight, which leaves out fuel and attachments, while others state a weight with the deck fitted. When the listing is silent, the manual is the next stop.
Do not borrow a figure from a different model, even one that looks the same. A different deck or a different engine changes the weight, and a figure copied across models is how ramps and trailers end up loaded past their capacity. When no figure is stated anywhere, weigh the machine on a scale built for vehicles before you load it, and use that figure for every later plan.
Match the ramps to the mower
Loading a zero turn is where the weight figure does real work. Ramps are rated in pounds, and the capacity has to sit above the mower weight with room to spare. The listings in this guide show how those capacities read. Our aluminum vs steel mower ramps guide compares ramp materials.
| Ramp | Capacity | Length | Ramp weight |
|---|---|---|---|
| Evcitn 75 in ramps | 1500 lbs per pair | 75 in | 36.38 pounds |
| HQSLC 72.5 in ramps | 1500 lbs combined, 750 lbs each | 72.5 in | 17 lbs each, 34.1 pounds for the pair |
| WheelX 91 in ramps | 1900 lbs | 91 in x 11.4 in | 40.0 pounds |
Read the capacity the way the maker writes it. HQSLC lists 750 lbs for each ramp and 1500 lbs for the pair, so the pair figure is the one to compare with the mower weight. WheelX lists 1900 lbs for its pair of ramps, which covers a heavier mower, and Evcitn lists 1500 lbs per pair for its 75 in ramps. Use the mower weight with fuel, battery, and attachments fitted, and keep the mower weight below the capacity with a margin to spare rather than loading to the limit.
Length matters as well. A longer ramp gives a gentler slope into the truck bed or trailer: WheelX ramps (on Amazon) run 91 in long, HQSLC ramps (on Amazon) run 72.5 in, and Evcitn ramps (on Amazon) run 75 in. Check the height you load to as well: HQSLC lists a maximum incline height of 31.5 in, and WheelX lists a maximum use height of 34.5 in. A ramp used past its stated height is steeper than the maker planned for, so measure the bed or trailer height before you buy.
Loading and hauling checks
Straps and tie-downs hold the mower once it is on the trailer. HQSLC ships four safety straps with its ramps, and Evcitn ships 2 tie-down straps and 1 high-visibility hazard tape. See our lawn mower trailer tie downs picks for kits built for the job. Tie the mower down at the points the manual names, and check the straps after a short stretch of road.
Storage counts too. Ramps fold down for the garage or the truck bed: Evcitn folds to 38.2 in x 8.9 in x 3.7 in, HQSLC folds to 38.1 in x 8.7 in x 3.7 in, and WheelX folds to 45.5 in x 11.4 in. A folded ramp that fits the truck bed rides along to the property instead of staying home.
Trailers need the same check as ramps. Compare the trailer capacity with the mower weight plus the weight of ramps, fuel cans, and anything else riding along, and keep the total under the trailer capacity. Our mower trailer vs utility trailer guide compares trailer types for this job.
Safety
Weight is a safety figure, not just a loading figure. Never exceed the ramp or trailer capacity, and never ride the mower up a ramp that is steeper than the maker allows. Zero-turn mowers lose traction on slopes and near ponds or ditches, so follow the slope limit the maker states in the manual and keep the machine off ground it cannot hold. Wear eye and hearing protection and keep children and pets out of the yard. Use ROPS and the seat belt where the machine has them, carry no passengers, and refuel only with the engine off and cool.
FAQ: mowing large lots
How much does a zero turn weigh?
There is no fixed figure. The weight follows the deck, the frame, the engine or battery, and the fuel on board, so read the weight the maker states for your exact model. Use that figure for ramps, trailer, and storage plans.
Does a wider deck mean a heavier mower?
Yes, in general. A wider deck brings more steel, a longer frame, and bigger wheels and tires, and each of those adds weight. A commercial frame adds more still, which is why mowers with the same deck can still weigh different amounts.
Can a 1500 lb ramp pair carry a zero turn?
It can when the mower weight sits under the capacity with room to spare. HQSLC lists 750 lbs for each ramp and 1500 lbs for the pair, and Evcitn lists 1500 lbs per pair, so compare your mower weight with those figures. A heavier mower needs the higher capacity, such as the 1900 lbs WheelX lists for its pair.
What is the difference between shipping weight and running weight?
Shipping weight is the machine as packed, often without fuel or attachments. Running weight is the machine as you run it, with fuel or battery and deck fitted. Use the running weight for loading, and when the listing states only a shipping weight, ask the maker for the running figure.
How do I find the weight when the listing does not state it?
Check the manual for the model. When the manual states no weight, weigh the machine on a vehicle scale and write the figure down for ramps and trailer plans. Do not copy a weight from a different model, even one that looks the same.




