Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Much Is a Drive Belt: Prices and What Affects Them

A drive belt's price comes down to size and fit: width, length, OEM part number and cord material, shown here on two replacement belts for riding mowers.

How Much Is a Drive Belt: Prices and What Affects Them
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1UDC Parts 532130969 Drive Belt for HusqvarnaUDC Parts 532130969 Drive Belt for Husqvarna9.7/10View on Amazon
  2. 2UDC Parts GX20006 Drive Belt for John DeereUDC Parts GX20006 Drive Belt for John Deere9.6/10View on Amazon

A riding mower that will not move often points to a worn drive belt. The belt is a wear part, and how much is a drive belt comes down to its size, its fit and its cord material, not the mower brand on the hood. This guide shows what sets the price and how to match a belt to a mower before ordering.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

UDC Parts 532130969 Drive Belt for Husqvarna

UDC Parts 532130969 Drive Belt for Husqvarna

UDC Mower Belts9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Aramid-cord drive belt, 1/2 inch wide and 92.5 inches long, for Husqvarna and Craftsman riding mowers.

This belt handles the drive-belt replacement on Husqvarna and Craftsman riding mowers, including the YTH22V46, YTH24K48 and YTH24V48 models listed for part number 532130969. It measures 1/2 inch wide and 92.5 inches long, with aramid tensile cords, a natural rubber body and a two-layer wrapping cover. The maker states low friction and minimal wear volume, with high breaking strength and flexibility for heavy-duty use.

The maker gives two lengths, 92.5 and 92.45 inches; check before ordering. The belt includes 1 year of product support for manufacturing defects, and the maker asks buyers to confirm the complete model number before ordering, since parts may differ between configurations of the same mower model.

Pros

  • Fits a long list of Husqvarna, Craftsman, Poulan and AYP models
  • Aramid tensile cords with a natural rubber body
  • Two-layer wrapping cover for strength and flexibility
  • 1 year of product support for manufacturing defects

Cons

  • Fits only the models listed for part numbers 532130969 and 592855201
  • The maker warns that parts may differ between configurations of the same mower model
  • The 92.5 inch length does not fit the John Deere models the other belt covers
  • No stated replacement interval
UDC Parts GX20006 Drive Belt for John Deere

UDC Parts GX20006 Drive Belt for John Deere

UDC Mower Belts9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Aramid-cord drive belt, 1/2 inch wide and 88.9 inches long, for John Deere D, L, LA, S and X series mowers.

This belt handles the drive-belt replacement on John Deere riding mowers, covering the D, L, LA, S and X series models listed for part numbers GX20006 and UC30568. It measures 1/2 inch wide and 88.9 inches long, with an aramid cord for strength. The maker states low friction and minimal wear volume, for long-lasting performance.

The listing gives a wide fit list, from the D110 to the X167, and the belt replaces two John Deere part numbers, so one belt covers more than one model family. No warranty or product support term is stated, so keep the part number and the receipt with the mower manual.

Pros

  • Replaces John Deere GX20006 and UC30568
  • Aramid cord for strength and flexibility
  • Fits D, L, LA, S and X series mowers
  • 1/2 inch wide and 88.9 inches long as stated

Cons

  • No warranty or product support term is stated
  • Fits only the listed John Deere models
  • The 88.9 inch length does not fit the Husqvarna models the other belt covers
  • No stated body material beyond the aramid cord

How much is a drive belt: size, fit and cord

The listings for these belts state no price, so the answer starts with what the belt is: a loop of rubber and cord cut to one width and one length, made to replace the OEM part numbers listed for it. The two belts here are both 1/2 inch wide, one 88.9 inches long and one 92.5 inches long, and each replaces a different OEM part number. A belt that matches the mower by part number, width and length is the right belt, whatever the mower brand.

Belt Width Length Replaces
UDC Parts GX20006 for John Deere 1/2 in 88.9 in John Deere GX20006, UC30568
UDC Parts 532130969 for Husqvarna 1/2 in 92.5 in Husqvarna 592855201, Craftsman 532130969

Both belts use aramid cord, and the Husqvarna belt adds a natural rubber body with a two-layer wrapping cover. See how to measure a drive belt before ordering, so the width and length match the old belt.

Belts that fit the measurement

Once the old belt is off the mower, match its width, length and OEM part number to one of these belts, which cover the John Deere and Husqvarna models listed on each card.

Measure the old belt before ordering

Width and length are the two figures to measure. Both belts here are 1/2 inch wide, so the length is what separates them: 88.9 inches for the John Deere belt and 92.5 inches for the Husqvarna belt. Measure the old belt width and its length around the loop, and compare it with the part number in the mower manual. The lawn mower belt sizes guide shows how to find the right fit.

Match the part number, not the mower brand

The John Deere belt replaces GX20006 and UC30568 and fits D, L, LA, S and X series mowers, while the Husqvarna belt replaces 532130969 and 592855201 and fits Husqvarna, Craftsman, Poulan and AYP models. The brand on the hood does not decide the fit; the part number does. Parts may differ between configurations of the same mower model, so confirm the complete model number before ordering, as the maker asks.

Aramid cord and what it does

Both belts use aramid cord, which the maker describes as the tensile cord inside the belt. The Husqvarna belt pairs that cord with a natural rubber body and a two-layer wrapping cover, and the maker states low friction and minimal wear volume. The John Deere belt states the same low friction and minimal wear volume for its aramid cord belt. Cord material is one of the things that sets a belt apart from a plain rubber loop, and it is worth checking on the listing before ordering.

Safety

Work with the engine off and cool, and keep hands clear of the deck and pulleys while the belt is off. Wear gloves and eye protection when handling a worn belt, and keep children, pets and bystanders away from the work area.

FAQ: mowing large lots

How much is a drive belt for a riding mower?

The listings do not state a price. What a belt costs follows its size and fit: the two belts here are 1/2 inch wide and measure 88.9 or 92.5 inches long, and each replaces stated OEM part numbers.

What size drive belt does my mower need?

Match the 1/2 inch width and the length of the old belt, and check the OEM part number: GX20006 or UC30568 for the John Deere models listed, 532130969 or 592855201 for the Husqvarna and Craftsman models listed.

How do I know a drive belt fits my mower?

Confirm the complete model number before ordering. The maker warns that parts may differ between configurations of the same mower model, so the model number matters more than the mower brand.

What is an aramid cord drive belt?

Both belts here use aramid cord as the tensile cord inside the belt. The Husqvarna belt adds a natural rubber body with a two-layer wrapping cover, and the maker states low friction and minimal wear volume.

Does a drive belt come with a warranty?

The Husqvarna belt includes 1 year of product support for manufacturing defects. The John Deere belt states no warranty term.

More mowing guides

More buying guides

Mower Maintenance ·

Drive Belt Problems: Causes and Fixes

Drive belt problems come down to wear, wrong fit, or a slipped belt, and this guide shows the causes, the checks, and the replacement…

Mower Maintenance ·

Best Drive Belt for Snow Blower (2026)

5 replacement drive belts for snow blowers, 3/8 in wide and 34 in to 36 in long, compared by size, cord, fitment and stated…