Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Change Auger Belt on Snowblower

A plain guide to changing a snowblower auger belt, from matching the part number to fitting the new belt.

How to Change Auger Belt on Snowblower
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Stens 265-811 Cogged Auger Belt for MTD SnowblowersStens 265-811 Cogged Auger Belt for MTD Snowblowers9.5/10View on Amazon
  2. 2Anpongta 954-04050A Kevlar Auger Belt for MTD and Cub CadetAnpongta 954-04050A Kevlar Auger Belt for MTD and Cub Cadet9.5/10View on Amazon
  3. 3BOAISDHY 754-04195 Auger Belt for MTD 3-Stage SnowblowersBOAISDHY 754-04195 Auger Belt for MTD 3-Stage Snowblowers9.5/10View on Amazon
  4. 4Dofank 954-04050A Kevlar Auger Belt for MTD SnowblowersDofank 954-04050A Kevlar Auger Belt for MTD Snowblowers9.4/10View on Amazon

When the auger stops turning while the engine still runs, the belt that drives it has often slipped, stretched, or snapped, and knowing how to change auger belt on snowblower saves a trip to the shop. The job comes down to matching the replacement belt to the machine, opening the belt cover, slipping the old belt off the pulleys, and fitting the new belt in its place. This guide walks through that job in order.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Stens 265-811 Cogged Auger Belt for MTD Snowblowers

Stens 265-811 Cogged Auger Belt for MTD Snowblowers

Stens9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Cogged auger belt, 35 inches long and 3/8 inch wide, for MTD 2-stage snowblowers from 1992 to 2002.

Who it's for: owners of MTD 2-stage snowblowers from 1992 to 2002 who want a cogged belt with a stated warranty.

Who should skip it: anyone with a newer MTD machine.

The Stens 265-811 is the only belt here with a stated warranty, a 1-Year Warranty, and the only cogged belt in the group. It measures 35 inches long and 3/8 inch wide and fits MTD 2-stage snowblowers from 1992 to 2002, replacing the MTD 954-0430 and 954-0431 part numbers.

Pros

  • Cogged belt made for auger drive on MTD 2-stage snowblowers
  • 1-Year Warranty stated on the listing
  • Replaces the MTD 954-0430 and 954-0431 part numbers
  • 35 inch length matches the auger belt size for those years

Cons

  • Fits MTD 2-stage snowblowers from 1992 to 2002 only
  • 3/8 inch width is narrower than the 1/2 inch belts in this guide
  • A single belt per order
  • Does not replace the 954-04050A belt for newer MTD machines
Anpongta 954-04050A Kevlar Auger Belt for MTD and Cub Cadet

Anpongta 954-04050A Kevlar Auger Belt for MTD and Cub Cadet

Anpongta9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Kevlar cord V-belt, 1/2 inch wide and 35 inches long, replacing MTD 954-04050A on Cub Cadet and Troy-Bilt snowblowers.

Who it's for: owners of Cub Cadet or Troy-Bilt machines on the fit list who want a Kevlar cord belt.

Who should skip it: anyone who wants a stated warranty.

The Anpongta belt is a Kevlar cord V-belt, 1/2 inch wide and 35 inches long, replacing MTD 754-04050A and 954-04050A. Its fit list covers Cub Cadet 1X 21 and 2X 524SWE models, for MTD 2-stage snow throwers from 2005 and newer. The listing states no warranty term.

Pros

  • Kevlar cord belt in the 1/2 inch by 35 inch size
  • Fits a long list of Cub Cadet and Troy-Bilt models
  • Replaces MTD 754-04050A and the matching 954-04050A number
  • Suits MTD 2-stage snow throwers from 2005 and newer

Cons

  • No warranty term is stated on the listing
  • Aftermarket belt, not an OEM part
  • 35 inch length fits only machines that take that belt size
  • Fits the listed Cub Cadet and Troy-Bilt models only
BOAISDHY 754-04195 Auger Belt for MTD 3-Stage Snowblowers

BOAISDHY 754-04195 Auger Belt for MTD 3-Stage Snowblowers

BOAISDHY9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Auger drive belt, 1/2 inch wide and 37 inches long, for MTD and Cub Cadet 3-stage snowblowers.

Who it's for: owners of 3-stage MTD or Cub Cadet machines who need the 37 inch size.

Who should skip it: anyone whose machine takes a 35 inch belt.

The BOAISDHY belt is the only 37 inch belt here, 1/2 inch wide, replacing 754-04195 and 954-04195A. It fits MTD 2-stage snowblowers after 2008 and Cub Cadet 26 inch 3-stage snowblowers. The listing states no warranty term.

Pros

  • 37 inch length suits the 3-stage machines in the fit list
  • 1/2 inch width matches the auger drive belt size
  • Fits Troy-Bilt Storm and Vortex models
  • Fits MTD 2-stage snowblowers after 2008 as well as 3-stage models

Cons

  • No warranty term is stated on the listing
  • Aftermarket belt, not an OEM part
  • 37 inch length fits only machines that take that belt size
  • Longer than the 35 inch belts here, so it does not swap with them
Dofank 954-04050A Kevlar Auger Belt for MTD Snowblowers

Dofank 954-04050A Kevlar Auger Belt for MTD Snowblowers

Dofank9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Kevlar auger belt, 1/2 inch wide and 35 inches long, replacing MTD 954-04050A on Cub Cadet and Troy-Bilt snowblowers.

Who it's for: owners of the listed Cub Cadet or Troy-Bilt machines who want a Kevlar belt.

Who should skip it: anyone whose machine takes the 37 inch belt.

The Dofank belt is a Kevlar auger belt, 1/2 inch wide and 35 inches long, replacing MTD 754-04050A and 954-04050A for Cub Cadet and Troy-Bilt snowblowers. The maker gives two widths for this belt, 1/2 inch and 3/8 inch, so check the width before ordering.

Pros

  • Kevlar belt in the 1/2 inch by 35 inch size
  • Fits Cub Cadet 2X and 3X 26 models in the fit list
  • Replaces MTD 754-04050A and the matching 954-04050A number
  • Suits MTD 2-stage snowblowers from 2005 and newer

Cons

  • Aftermarket belt, not an OEM part
  • 35 inch length fits only machines that take that belt size
  • Fits the listed Cub Cadet and MTD models only
  • Does not fit the 754-04195 or 954-0430 machines in this guide

How to change auger belt on snowblower: check the belt size and part number

Start with the part number on the old belt, then match the length and width. The belts in this guide run 35 inches or 37 inches long, with widths of 1/2 inch or 3/8 inch. A belt that is too long slips, and a belt that is too short will not seat on the pulleys, so the size has to match the machine.

Belt Length Width Fits
Stens 265-811 35 in 3/8 in MTD 2-stage snowblowers, 1992-2002
Anpongta 954-04050A 35 in 1/2 in MTD 2-stage snow throwers, 2005 and newer
Dofank 954-04050A 35 in 1/2 in MTD 2-stage snowblowers, 2005 and newer
BOAISDHY 754-04195 37 in 1/2 in MTD 2-stage after 2008; Cub Cadet 26 in 3-stage

For help sizing the old belt, see how to measure a drive belt.

Open the cover and remove the old belt

Park the machine on flat ground with the engine off and cool, then take the belt cover off and note how the old belt sits on the pulleys. Note the path the belt takes before touching it, since the new belt has to follow the same path. Slip the old belt off the pulleys and set it aside for comparison with the new belt.

Fit the new belt on the pulleys

Lay the new belt beside the old belt and compare the length and width. Work the new belt onto the pulleys along the path noted earlier, making sure it seats fully in the grooves and sits straight. With the engine off, hold the auger control engaged so the belt tensions, then turn the auger by hand to check that the belt tracks true and the auger moves with it.

Refit the cover and check the auger

Refit the belt cover and fasten it in place, then start the engine and engage the auger to check that it turns smoothly and stops when released. Listen for slipping or squealing, which points to a belt that is not seated right. Keep hands and loose clothing clear of the auger while the machine runs.

Belts for this job

The belts below cover the sizes and part numbers in the table above. The Anpongta and Dofank belts share the same fit list, while the Stens and BOAISDHY belts (on Amazon) fit different years and models.

FAQ: mowing large lots

How do I know the auger belt needs changing?

The auger stops turning while the engine runs, or it turns slowly and slips under load. Open the cover and look at the belt before ordering a replacement.

What size auger belt does a snowblower take?

The belts in this guide are 35 inches or 37 inches long and 1/2 inch or 3/8 inch wide, and the part number gives the exact match. The Stens belt is 35 inches long and 3/8 inch wide for MTD 2-stage snowblowers from 1992 to 2002, while the Anpongta and Dofank belts are 35 inches long and 1/2 inch wide for machines from 2005 and newer.

Can a 35 inch belt replace a 37 inch belt?

No. A 35 inch belt will not fit a machine that takes a 37 inch belt, and a 37 inch belt will slip on a machine that takes a 35 inch belt. Match the length, width, and part number to the old belt.

Which belt fits a Cub Cadet 2X 524SWE?

The Anpongta 954-04050A and the Dofank 954-04050A both list the Cub Cadet 2X 524SWE, in the 1/2 inch by 35 inch size.

Does the Stens belt fit newer MTD snowblowers?

No. The Stens 265-811 fits MTD 2-stage snowblowers from 1992 to 2002. Machines from 2005 and newer take a different belt: the 954-04050A belts fit MTD 2-stage machines from 2005 and newer, while the 37 inch 754-04195 belt fits MTD 2-stage machines after 2008 and 3-stage models.

More mowing guides

More buying guides