Snow Blower Maintenance Kit: What to Buy
A snow blower maintenance kit bundles oil, shear pins and wear parts, and this guide shows which kit parts fit a 2-stage machine and what each part does.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
CUB CADET 490-950-F072 547cc Engine Maintenance Kit F6RTCView on Amazon - 2
Troy Bilt 490-241-Y014 Snowthrower Maintenance KitView on Amazon - 3
Toro Genuine OEM 138-0699 Maintenance Kit for 21" Power ClearView on Amazon - 4
John Deere Original Equipment Maintenance Kit #LG275 Fits wView on Amazon - 5
10 pcs Snowblowers Shear Pins KitView on Amazon
A driveway buried under a night of snow, a blower that coughs and quits, and a chute that clogs mid-job: winter finds every weak part on a snow blower. A snow blower maintenance kit bundles the wear parts and consumables for a seasonal service, so the machine starts and throws snow when the storm arrives. This guide walks through what the kits hold, which parts wear out, and how to match a kit to the blower in the garage.
Other machines to compare
CUB CADET 490-950-F072 547cc Engine Maintenance Kit F6RTCCheck price on Amazon
Troy Bilt 490-241-Y014 Snowthrower Maintenance KitCheck price on Amazon
Toro Genuine OEM 138-0699 Maintenance Kit for 21" Power ClearCheck price on Amazon
John Deere Original Equipment Maintenance Kit #LG275 Fits wCheck price on Amazon
10 pcs Snowblowers Shear Pins KitCheck price on Amazon
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Snow blower maintenance kit: what the kits cover
A maintenance kit bundles the parts for a seasonal service together. The Troy-Bilt kit (on Amazon) carries 5.25 oz of Snow Slick Spray, 2 bottles of 20 oz 5W-30 oil, 2 oz of fuel stabilizer and 4 shear pins, and it fits 300/500/600 Series units from 2005 and after. The Ariens kit carries 2 quarts of 5W-30 engine oil, 8 oz of gear lube, a 2 oz bottle of 3-n-1 fuel treatment that treats 10 gallons of gas, and an oil funnel. The table below lines up the kits by what they hold.
| Kit | In the box | Fit and notes |
|---|---|---|
| Troy-Bilt 490-241-Y014 | 5W-30 oil, fuel stabilizer, 4 shear pins | Fits 300/500/600 Series units 2005 and after |
| Ariens oil and gear lube kit | 2 quarts 5W-30 oil, 8 oz gear lube, fuel treatment | Treatment treats 10 gallons of gas |
| Impeller kits | 3/8 in or 1/4 in rubber paddles, metal straps, bolts | For 2-stage machines; check blade count and gap |
| Shear pin kit | 1/4 in by 1.65 in pins with cotter pins | Replaces 738-04124A and 714-04040 |
| Cub Cadet 547cc kit | Engine maintenance kit | Fits 2X 30 inch and 3X 30 PRO models |
Shear pins are the wear part to stock up on: the Goodffy kit holds 10 shear pins with cotter pins, and the Troy-Bilt kit carries 4 shear pins in the box. See our Ariens shear pin size chart for the pin that fits your model, and our snow blower size guide for the width that suits your driveway.
Step 2: change the oil and treat the fuel
Start with the oil. The Ariens kit carries 2 quarts of SAE 5W-30 engine oil with 8 oz of synthetic gear lube, and the Troy-Bilt kit carries 2 bottles of 20 oz 5W-30 oil. The Ariens kit adds a 2 oz bottle of 3-n-1 fuel treatment that treats 10 gallons of gas, and the Troy-Bilt kit adds 2 oz of fuel stabilizer. Change the oil with the engine off and cool, and follow your manual for the grade and amount your engine calls for.
Step 3: keep spare shear pins on hand
A shear pin protects the rest of the machine when the auger hits ice or a rock, by taking the force of the hit. The Goodffy kit holds 10 shear pins with cotter pins, sized at 1/4 in in diameter and 1.65 in long, and it replaces 738-04124A and 714-04040 pins. It fits most 2-stage machines and some 3-stage machines, and it lists MTD, Troy Bilt, Craftsman, Cub Cadet, Yard Man, Huskee and Bolens among its fits. Keep spares in the garage, and check your manual for the pin your machine calls for.
Step 4: close the impeller gap
Impeller kits close the gap between the impeller blades and the housing wall, and the makers state the smaller gap gives the machine more snow throwing capability and less clogging. The ZHIXING 3-blade kit (on Amazon) carries 3/8 in thick rubber paddles, 2 in wide by 5 in long, made of SBR rubber with a minimum tensile strength of 725 PSI and a durometer of 65-75, with 3 metal straps, 9 bolts and 3 self-tapping screws. The 4-blade kit carries 4 straps, 12 bolts and 4 screws. The 1/4 in thick kit uses rubber with a hardness of 65-70, and it states it is not compatible with the Ariens Compact 24. Measure the gap and count the blades before you order, and confirm the paddle thickness your machine has room for.
Step 5: clean the carburetor without removing it
When a blower will not start after storage, the carburetor is a place to look, and the GumBuster kit cleans it without taking it off the machine. The kit swaps the carburetor bowl retaining screw for a purge valve, then the cleaner goes in through the valve and dissolves the gum inside. The kit holds a purge valve and a pressurized purge can, and it stays ready on the shelf for the next hard start. Follow the instructions that come with the kit, and keep the work area clear while the engine runs.
Match the kit to your machine
Match the kit by model, not by looks. The Cub Cadet 490-950-F072 kit fits (on Amazon) Cub Cadet snow blowers including the 2X 30 inch and 3X 30 PRO models, and the Toro 138-0699 kit fits the 21 inch Power Clear 621 and 721 SnowMaster machines. The Troy-Bilt kit fits 300/500/600 Series units from 2005 and after. The HMYNJEI impeller kit (on Amazon) states it is not compatible with the Ariens Compact 24, so check the fit list and your manual before you order.
Safety
Wear eye and hearing protection and clear the driveway of stones and debris before you start. Shut off the engine, remove the ignition key, disconnect the spark plug wire and wait for all moving parts to stop before impeller work. After mounting impeller paddles, rotate the impeller by hand through a complete cycle to confirm clearance and free movement before you run the machine. Refuel only with the engine off and cool, and keep children and pets out of the yard while the blower runs.
FAQ: mowing large lots
What is in a snow blower maintenance kit?
It depends on the kit. The Troy-Bilt kit carries oil, fuel stabilizer and shear pins, the Ariens kit carries engine oil, gear lube and fuel treatment, and the impeller kits carry rubber paddles, straps and bolts. Check the fit list against your model before you order.
Which shear pin fits my snow blower?
The Goodffy kit replaces 738-04124A and 714-04040 pins, and the Troy-Bilt kit carries 4 OEM-738-04124 shear pins. Check your manual for the pin your machine calls for, and keep spares on hand.
Do impeller kits fit all 2-stage snow blowers?
No. The kits fit 3-blade or 4-blade impellers, so count the blades and measure the gap before you order. The HMYNJEI kit states it is not compatible with the Ariens Compact 24.
What oil does a snow blower use?
The Ariens and Troy-Bilt kits in this guide carry 5W-30 oil, and the Ariens kit adds 8 oz of gear lube. Follow your manual for the grade and amount your engine calls for.
More mowing guides
- Snow Blower Size: How to Pick the Right Width
- Ariens Shear Pin Size Chart: Sizes and Fits
- Best Fuel System Cleaner for Snow Blower (2026)
- Best Drive Belt for Snow Blower (2026)
Browse the mower maintenance hub for more seasonal service guides.




