How to Repair Pressure Washer Pump: Valves, Seals and Rebuild Kits
A plain plan for a leaking or weak pressure washer pump: find the failed part, match the kit to the pump model, and fit valves or seals that restore pressure.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Yoursme 34262 Seal Kit for CAT 66DX and 6DX Pumps9.7/10View on Amazon - 2
Simpson Replacement Valve Kit for Pressure Washer Pumps9.6/10View on Amazon - 3
Otoolling 20mm Pressure Washer Pump Rebuild Kit for General Pump9.6/10View on Amazon - 4
PuBaDuoParts AR2235 Water Seal Kit for Briggs and Stratton Pumps9.5/10View on Amazon
To repair a pressure washer pump, find the part that lets pressure escape, match a valve kit or seal kit to the pump model, and fit the new parts in place of the worn ones. A pump that leaks at the head or loses pressure while the washer itself runs well often needs valves or seals rather than a whole new pump. This guide shows how to repair pressure washer pump trouble by naming the failed part and the kit that fits it.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Yoursme 34262 Seal Kit for CAT 66DX and 6DX Pumps
Seal kit for CAT Pump 66DX and 6DX pumps, made of NBR rubber and rated up to 160°F.
Who it's for: owners of a CAT Pump 66DX or 6DX pump with a leak at the seals.
Who should skip it: owners of any other pump.
The Yoursme 34262 Seal Kit reseals a leaking CAT Pump and restores factory function, per the maker, by replacing seals that have lost pressure through age or cracking. The kit is made of NBR rubber, which the maker says resists oxidation, wear, tear, UV rays and solvents, and it handles temperatures up to 160°F. It comes with 15 pieces: 3 plunger retainer washer seals, 3 LPS seals with spring, 3 seal case O-rings, 3 V-packings and 3 male adapters.
Pros
- Fits CAT Pump 66DX and 6DX pumps, with the pump models named on the listing
- NBR rubber resists oxidation, wear, tear, UV rays and solvents, per the maker
- Handles temperatures up to 160°F
- 15 pieces, with 3 of each seal part in one kit
Cons
- Fits only the named CAT Pump models, so check the pump model number before ordering
- Seal sizes are not stated, so match by pump model
- No valve parts in the kit, so a valve fault needs a separate kit
- Seals only, so gaskets and washers are not included

Simpson Replacement Valve Kit for Pressure Washer Pumps
6-piece valve kit with O-rings and seats in stainless steel and brass, for AAA and OEM pressure washer pumps.
Who it's for: owners of a named AAA or OEM pump with weak pressure or a leak at the valve caps.
Who should skip it: owners whose pump model is not on the fit list, or anyone whose leak sits at the seals.
The Simpson Replacement Valve Kit brings a pressure washer pump back into action with 6 complete valves, each with an O-ring and a seat, in stainless steel and brass. The valves let water flow through the pump and manifold to create pressure, and the listing says to grease the O-ring on each new valve before fitting it.
Pros
- 6 complete valves with O-rings and seats in one kit
- Stainless steel and brass valve parts
- Fits AAA and OEM pumps, with the pump models named on the listing
- Genuine Simpson parts for commercial and residential washers
Cons
- Valve kit only, with no seals for the plungers
- Warranty term is not stated on the listing
- Fit is limited to the named AAA and OEM pump models
- No seal sizes are given, so match the kit by pump model

Otoolling 20mm Pressure Washer Pump Rebuild Kit for General Pump
Rebuild kit for General Pump models with 20mm pistons, with 13 parts for the pump head.
Who it's for: owners of a named General Pump with a worn, leaking pump head.
Who should skip it: owners of any other pump brand, or anyone who needs valves alone.
The Otoolling rebuild kit holds 13 parts for a General Pump with 20mm pistons: 3 Kit 28 assemblies, 1 Kit 6 assembly and 1 Kit 1 assembly, together with seals, gaskets, washers and O-rings. The metal parts are machined from high-strength, corrosion-resistant steel, and the mating parts are molded from heavy-duty engineering plastics.
Pros
- 13 parts cover the pump head without sourcing extra parts
- Valve plates, valve springs, seals, O-rings and gaskets in one kit
- Steel parts resist corrosion and abrasive particulates, per the maker
- Fits a wide list of General Pump models with 20mm pistons
Cons
- Fits only General Pump models with 20mm pistons
- Warranty term is not stated on the listing
- Heaviest of the kits with a stated weight, at 1.17 lb
- Suits a full rebuild, so it is more than one worn valve needs

PuBaDuoParts AR2235 Water Seal Kit for Briggs and Stratton Pumps
6-pack of AR2235 water seals for Briggs and Stratton and Annovi Reverberi RMW and RMV pumps.
Who it's for: owners of a named RMW or RMV pump who want spare seals on hand.
Who should skip it: owners whose pump needs valves, or whose seal size differs from the stated measures.
The PuBaDuoParts AR2235 kit holds 6 water seals for Briggs and Stratton and Annovi Reverberi RMW and RMV pumps, and it replaces OEM part numbers 204084GS and 200345GS. Each seal measures 0.78 in across the outside, 0.46 in across the inside, and 0.14 in thick.
Pros
- 6 seals in the pack cover repeat repairs
- Seal measures are stated: 0.78 in outside, 0.46 in inside, 0.14 in thick
- Direct replacement for OEM part numbers 204084GS and 200345GS
- Reinforced rubber resists leaks under high water pressure, per the maker
Cons
- Seals only, with no valves or gaskets
- Fits only the named RMW and RMV pumps and washer brands
- No temperature rating is stated on the listing
- One seal size only, so other pumps need a different kit
How to repair pressure washer pump: find the failed part
Start with the pump head while the washer is off and cool. Look for water dripping from the valve caps or from the seam where the head meets the manifold, and for seals that sit cracked or flattened. A leak at the valve caps points to the valves, while a leak around the plungers points to the seals. Worn valves show up as weak spray, because the valves let water flow through the pump and manifold to create pressure.
| Sign | Part to check | What fixes it |
|---|---|---|
| Water drips from the valve caps | Valves, O-rings and seats | A valve kit with new O-rings and seats |
| Water leaks around the plungers | Seals and V-packing | A seal kit matched to the pump model |
| Pressure fades and the head leaks in several places | Valves, seals, gaskets and washers | A full rebuild kit for the pump head |
Match the kit to the pump model
Check the pump model number before ordering, and match it to the fit list on the kit. The Simpson valve kit fits AAA and OEM pumps. The Yoursme seal kit (on Amazon) fits CAT Pump 66DX and 6DX pumps, and the Otoolling rebuild kit (on Amazon) fits General Pump models with 20mm pistons. The PuBaDuoParts seal kit (on Amazon) fits Briggs and Stratton and Annovi Reverberi RMW and RMV pumps, and it replaces OEM part numbers 204084GS and 200345GS. A kit made for a different pump model may not fit or seal, even when the seals look the same size, so match the kit by pump model number.
Measure the old seal when the listing gives seal sizes. The PuBaDuoParts kit lists an outside diameter of 0.78 in, an inside diameter of 0.46 in, and a thickness of 0.14 in. Match those measures to the seal that came out of the pump before ordering a spare set. See the pressure washer maintenance guide for routine care of the pump and the washer.
Fit the new valves and seals
Work with the washer off and the water supply closed, and keep the parts in order as they come out. After removing the old valve, grease the O-ring on each new valve before fitting it, as the Simpson listing directs. Seat each seal squarely, with O-rings in their grooves rather than pinched at the edge. When the head is back together, run the washer and watch the valve caps and the plunger area for drips.
Safety around a pressure washer pump
Never point the spray at people or animals, and keep children and pets out of the work area while the washer runs. Run gas units outdoors only, and refuel with the engine off and cool. Wear eye and hearing protection before washing.
Repair kits for a pressure washer pump
The valves and seals in these kits handle the parts of the job above: the valve kit covers the valve caps, the seal kits cover the plungers, and the rebuild kit covers the pump head.
FAQ: mowing large lots
How does the leak show whether the pump needs a valve kit or a seal kit?
A drip at the valve caps points to the valves, so a valve kit with new O-rings and seats fits the job. A leak around the plungers points to the seals, so a seal kit matched to the pump model fits the job.
Can a pressure washer pump be repaired instead of replaced?
A pump with worn valves or seals can often be repaired with a matched kit. When the pump model matches the kit fit list, new valves and seals restore the seal at the head. Damage beyond the valves and seals needs a closer look from the maker or a repair shop.
How is a seal kit matched to a pressure washer pump?
Check the pump model number, then compare it with the fit list on the kit. The Yoursme kit names CAT Pump 66DX and 6DX models, and the PuBaDuoParts kit names Briggs and Stratton and Annovi Reverberi RMW and RMV pumps. When the listing gives seal sizes, match them too: the PuBaDuoParts seals measure 0.78 in outside, 0.46 in inside, and 0.14 in thick.
What makes a pressure washer pump lose pressure?
Worn valves let water slip past instead of building pressure, and aged seals let pressure escape at the plungers. The Yoursme listing describes seals that have lost pressure through age and cracking.
What is in a pressure washer pump rebuild kit?
The Otoolling rebuild kit holds 13 parts for a General Pump with 20mm pistons: 3 Kit 28 assemblies, 1 Kit 6 assembly, and 1 Kit 1 assembly, with seals, gaskets, washers and O-rings. The valve kit holds 6 complete valves with O-rings and seats.




