Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Lawn Mower Blade Cross Reference Chart

Match your old blade to a replacement by deck size, length, width, center hole and OEM number, using a cross reference chart.

Lawn Mower Blade Cross Reference Chart
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SHARPAL 103N All-in-1 Lawn Mower Blade and Garden ToolSHARPAL 103N All-in-1 Lawn Mower Blade and Garden Tool9.7/10View on Amazon
  2. 2Oregon Gator G3 Mulching Lawn Mower BladeOregon Gator G3 Mulching Lawn Mower Blade9.7/10View on Amazon
  3. 3Greenworks 20 in Replacement Lawn Mower BladeGreenworks 20 in Replacement Lawn Mower Blade9.7/10View on Amazon

A dull blade tears the grass instead of cutting it, and the lawn shows the damage for days after the mow. The fix starts with the right replacement, and a lawn mower blade cross reference chart is the tool that turns the numbers stamped on an old blade into a part that fits the deck. This guide shows how to read that chart, match the measurements, and check the OEM number before ordering.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Lawn mower blade cross reference chart: match length, width and center hole

A cross reference chart lists replacement blades by the measurements that decide fit: blade length, blade width, center hole shape, and the deck the blade was made for. Start with the deck size, because a blade made for a wider deck will not fit a smaller deck, and a short blade leaves grass uncut. Then match the length and width, and finish with the center hole and the OEM number.

Blade Deck Length Width Center hole OEM numbers
MaxPower 561735B, 3-blade set 48 in. 16-5/8 in. 2-1/2 in. 5 point star 173920, 180054, 532180054, 575938201, 532173920, CMXGZAM110149, PP24005
Toro 117-7277-03, 3-pack 48 in. Not stated Not stated Not stated 117-7277-03
8TEN LawnRAZOR 942-05052A, 3-pack 50 in. Not stated Not stated Not stated 742-05052, 742-05052A, 942-05052, 942-05052A, 490-110-C155, 490-110-F155, 490-110-L155, 490-110-M155, CMXGZAM110155
Greenworks 2952002, pack of 2 25 in. 12.48 in. 2.6 in. Not stated 2952002
8TEN Spartan 438-0001-00, 3-pack 54 in. 18.5 in. 2.5 in. Circle 438-0001-00

The MaxPower set shows why the chart matters: its blades measure 16-5/8 in. long and 2-1/2 in. wide, with a 5 point star center hole, and the maker lists the OEM numbers it replaces. The 8TEN Spartan blade measures 18.5 in. long and 2.5 in. wide, with a circle center hole and a lift of 1.02 in.

Step 2: measure length, width and center hole

Take the old blade off the mower and lay it flat. Measure from tip to tip for length, across the widest flat part for width, and note the shape of the center hole. A 5 point star hole fits a star spindle, while a circle hole fits a round spindle with a bolt or pin. Write the measurements down with the deck size before you open a chart, so you compare the same figures the chart lists. See the how to take off a mower blade guide before you start.

Step 3: match the deck size

Deck size is the first filter in a cross reference chart. The listings in this guide cover a 25 in. Greenworks mower (on Amazon), 48 in. Craftsman, Husqvarna and Poulan decks, a 50 in. MTD and Cub Cadet deck, and a 54 in. Spartan deck. A blade listed for a 48 in. deck will cut short on a 50 in. deck and leave uncut strips, because each blade is sized for its own deck. Match the deck first, then check the blade measurements against the chart row for that deck. See the lawn mower blade sizes guide for the sizes each deck uses.

Step 4: check the OEM number

The OEM number is the part number the mower maker gave the blade, and it is the most reliable match in the chart. The MaxPower set replaces OEM numbers 173920, 180054, 532180054, 575938201, 532173920, CMXGZAM110149 and PP24005. The 8TEN LawnRAZOR blade fits (on Amazon) OEM numbers 742-05052, 742-05052A, 942-05052, 942-05052A, 490-110-C155, 490-110-F155, 490-110-L155, 490-110-M155 and CMXGZAM110155. The 8TEN Spartan blade (on Amazon) fits Spartan OEM number 438-0001-00. Find the number stamped on the old blade or in the mower manual, and match it exactly, letter for letter.

Step 5: confirm lift and blade type

Length, width and center hole decide fit, but lift and blade type decide how the blade cuts. The listings here name high lift blades, including the MaxPower set and the 8TEN Spartan blade, which lists a lift of 1.02 in. and a rolled foil type. The Toro blades (on Amazon) are high carbon steel, and the Greenworks blades are a dual-blade set for a 25 in. mower. If the chart row names a lift or a blade type, match it to the old blade.

What the center hole tells you

The center hole shape decides whether the blade seats on the spindle at all. The MaxPower blades use a 5 point star center hole, and the 8TEN Spartan blade uses a circle center hole. A star hole and a circle hole are not interchangeable, even when the length and width match, so check the hole shape before you order. Match the shape on the old blade to the shape in the chart row.

OEM blades versus aftermarket blades

An OEM blade carries the mower maker part number, such as the Toro 117-7277-03 blades made for Toro 48 in. TimeCutter, Titan and Z Master 2000 mowers. An aftermarket blade carries the replacement maker number and lists the OEM numbers it replaces, such as the MaxPower set and the 8TEN blades in the table above. Either type fits when the measurements and the OEM number match. See the OEM versus aftermarket mower blades guide for the tradeoffs.

Safety

A mower blade is sharp even when it looks dull, so handle it with gloves and keep fingers clear of the cutting edge. Wear eye protection and sturdy shoes, and keep children, pets and bystanders away from the work area. Work on flat ground with the mower parked, and follow the manual for the steps that remove the blade. Never reach under a deck while the engine can start.

FAQ: mowing large lots

How do I find the right replacement blade for my mower?

Read the deck size, the blade length and width, the center hole shape, and the OEM number off the old blade, then match all of them in a cross reference chart. The MaxPower set, for example, fits 48 in. decks with blades 16-5/8 in. long and 2-1/2 in. wide and a 5 point star center hole. When a measurement is missing from the chart, the OEM number is the match to trust.

Are lawn mower blades universal?

No. Blades differ by length, width, center hole shape and deck size, so a blade made for a 48 in. deck will cut short on a 54 in. deck and leave uncut strips. The listings in this guide cover 25 in., 48 in., 50 in. and 54 in. decks, and the MaxPower and 8TEN blades list the OEM numbers they replace. Match the chart row to your mower before you order. See the are lawn mower blades universal guide for more detail.

What does the OEM number on a mower blade mean?

The OEM number is the part number the mower maker gave the blade. Aftermarket blades such as the MaxPower and 8TEN sets list the OEM numbers they replace, so you can match your old blade without measuring. The 8TEN Spartan blade, for example, fits Spartan OEM number 438-0001-00, and the Toro blades carry part number 117-7277-03.

How do I measure a lawn mower blade?

Lay the blade flat and measure tip to tip for length and across the widest flat part for width. Note whether the center hole is a 5 point star or a circle, and read the deck size and OEM number from the old blade or the manual. Compare those figures with the chart row before you order.

What is the difference between a high lift blade and a standard blade?

A high lift blade has a taller lift that moves more air under the deck, which suits bagging and discharge, while a standard blade has a lower lift. The MaxPower set and the 8TEN Spartan blade are high lift blades, and the Spartan blade lists a lift of 1.02 in. Match the lift type on the old blade when the chart names it.

More mowing guides

Browse every mower maintenance guide for sharpening, balancing and blade care.

More buying guides