Parts of a Riding Mower: Main Components Guide
The main parts of a riding mower, from the engine and deck to the wheels and ignition switch, with 4 replacement parts for common repairs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
DEEG Front Wheel Bearing Conversion Kit9.7/10View on Amazon - 2
ELIFEPARTS Handle Knob Bolt Kit for Lawn Mowers9.6/10View on Amazon - 3
Oyviny Ignition Switch with 2 Keys for Lawn Tractors9.6/10View on Amazon - 4
Bagger Grass Chute Latch Set for AYP Husqvarna9.5/10View on Amazon
A riding mower is a small tractor built around a cutting deck, and knowing its parts makes every repair simpler. The parts of a riding mower fall into a few groups: the engine that powers it, the deck that cuts, the transmission and wheels that move it, the steering that aims it, and the controls and electrical parts that start it and stop the blades. This guide names each group, then shows replacement parts for the jobs that wear out first.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

DEEG Front Wheel Bearing Conversion Kit
A front wheel bearing conversion kit with 2 flange bearings, 2 dust caps, 6 washers and 2 ring clips, for riding lawn mower front wheels.
The DEEG kit has the longest parts list in this guide, with 2 flange bearings, 2 dust caps, 6 washers and 2 ring clips for riding lawn mower front wheels. The listing states a rim size of 34.925mm and an axle size of 19.05mm, and it names Craftsman, Husqvarna, AYP, Poulan, Jonsered and Murray among the fits. It handles the front wheel step, giving the bearings that carry the front wheels.
Pros
- Kit includes 2 flange bearings, 2 dust caps, 6 washers and 2 ring clips
- Fits riding lawn mower front wheels from Craftsman, Husqvarna, AYP, Poulan and Murray
- Rim size 34.925mm and axle size 19.05mm stated in the listing
- 1 year warranty stated in the listing
Cons
- Fits only wheels with a 34.925mm rim and a 19.05mm axle
- The listing mixes English and Spanish text, so read the fit list with care

ELIFEPARTS Handle Knob Bolt Kit for Lawn Mowers
A handle knob bolt kit with 2 T-handle knobs, 2 long bolts and 2 short bolts, for lawn mower and snow blower handles.
The ELIFEPARTS kit covers the handle step, with 2 T-handle knobs, 2 long bolts at 5.2cm and 2 short bolts at 2.95cm. The knobs are hard plastic and the bolts are galvanized iron, and the wing handle nut design allows hand tightening without tools. The listing says it fits most lawn mowers, snow blowers and outdoor equipment, and it names OEM part numbers 689-00600, 106-4161, 92-2260, 532183724, 117-5976 and MaxPower 339067.
Pros
- 2 T-handle knobs with 2 long bolts and 2 short bolts in the kit
- Long bolts 5.2cm and short bolts 2.95cm, as stated in the listing
- Hard plastic knobs with galvanized iron bolts
- Wing handle nut design allows hand tightening without tools
Cons
- Fits most mowers, so check the hole diameter before buying
- No warranty term is stated
- Red color only
- Knobs are hard plastic, not metal

Oyviny Ignition Switch with 2 Keys for Lawn Tractors
A 4-position, 7-terminal ignition switch with 2 keys, for Husqvarna, Craftsman, AYP, Delta and Poulan lawn tractors.
The Oyviny switch covers the ignition step, with 4 positions and 7 terminals and 2 keys in the box. The terminals are brass and the housing is ABS, and the listing names Husqvarna, Craftsman, AYP, Delta and Poulan among the fits. It replaces OEM part numbers 193350, 532193350, 33457, 21546319 and 6900-49P1.
Pros
- 4-position switch with 7 terminals
- Comes with 2 keys
- Brass terminals with an ABS housing
- Fits Husqvarna, Craftsman, AYP, Delta and Poulan lawn tractors
Cons
- No headlight control setting
- No warranty term is stated
- Long model list to check for a match before buying
- Only the black color is listed

Bagger Grass Chute Latch Set for AYP Husqvarna
A set of 2 bagger grass chute latches for AYP and Husqvarna lawn tractors.
The fascinatte set covers the bagger step, with 2 bagger latch straps for AYP and Husqvarna lawn tractors. The current part number is 532160793, and it replaces previous part numbers 130758, 130759, 130760, 532130758, 532130759, 532130760 and 160793. It also replaces SHN20-0146 and 42-555.
Pros
- Set of 2 bagger latch straps
- Fits many AYP and Husqvarna lawn tractor models
- Replaces part numbers 532160793, 160793, 130758, 130759 and 130760
- Current part number 532160793 replaces the older numbers listed
Cons
- No material is stated in the listing
- No dimensions are stated in the listing
- No warranty term is stated
- No install notes are stated in the listing
Other machines to compare
Fuel Shut Off Valve for MowerCheck price on Amazon
CRAFTSMAN 42" Gas Riding Lawn Mower with 17.5 HP* Briggs andCheck price on Amazon
Lawn Mower Fuel Tank for Briggs & Stratton 590568Check price on Amazon
NEW 2 PK! KING KUTTER AFTERMARKET FINISH MOWER ASSEMBLY-WITHCheck price on Amazon
EGO POWER+ Z6 Zero Turning Riding Mower Sun ShadeCheck price on Amazon
Parts of a riding mower: the main components
| Part group | What it does | Replacement part in this guide |
|---|---|---|
| Engine and electrical | Starts the mower and powers the deck | Ignition switch |
| Cutting deck and bagger | Cuts the grass and collects the clippings | Bagger chute latches |
| Front wheels | Carry the front of the mower and steer it | Front wheel bearing kit |
| Handle and controls | Fasten mower handles | Handle knob bolt kit |
Most repairs on a riding mower start with naming the part that failed. Match the part number on the old part to the replacement before buying, and check the fit notes in the listing. For the machines these parts fit, see our riding mowers hub.
The engine and the deck
The engine sits at the front of most riding mowers and drives the deck. The deck hangs under the frame and holds the blades, and the bagger chute carries clippings from the deck to the bag. The ignition switch is part of the electrical system that starts the engine, and it is one of the parts in this guide.
Steering, wheels and the drive
Steering on a riding mower runs through the front wheels, which carry the front of the mower and aim it. The front wheel bearings let the wheels turn freely, and worn bearings can make a wheel wobble or drag. The transmission drives the rear wheels.
Controls and the electrical system
The controls on a riding mower include the ignition switch, the throttle and the blade control. The ignition switch in this guide has 4 positions and 7 terminals, and it comes with 2 keys. It has no headlight control setting, so check the part number against the old switch before buying.
How to match a replacement part
Replacement parts fit by part number, not by looks. Check the part number on the old part against the replacement listing, and check the fit notes for the model. The handle knob kit lists the hole diameter as the check before buying, and the ignition switch lists model numbers to check. See our mower maintenance guides for the routine jobs around these parts.
Replacement parts for common repairs
The parts below cover the repair steps in this guide: the handle knobs that fasten mower handles, the bagger latches that hold the chute, the front wheel bearings that carry the front wheels, and the ignition switch that starts the engine.
Safety
Keep children and pets out of the yard while the mower runs, and keep hands clear of the deck and blades. Follow the manual for the mower, and check the part number before fitting a replacement.
FAQ: mowing large lots
What are the main parts of a riding mower?
The main groups are the engine, the cutting deck, the transmission and wheels, the steering, and the controls and electrical parts. The engine powers the mower, the deck cuts, the wheels carry it, and the ignition switch starts it.
How do I find the right replacement part for my mower?
Match the part number on the old part to the replacement listing, and check the fit notes for the model. The handle knob kit lists the hole diameter as the check, and the ignition switch lists model numbers to check before buying.
What does the ignition switch do?
The ignition switch starts the engine. The switch in this guide has 4 positions and 7 terminals, comes with 2 keys, and has no headlight control setting.
What comes in a front wheel bearing kit?
The kit in this guide includes 2 flange bearings, 2 dust caps, 6 washers and 2 ring clips. It fits front wheels with a 34.925mm rim and a 19.05mm axle, so check those sizes before buying.
Can I tighten handle knobs without tools?
Yes, on the kit in this guide. The wing handle nut design allows hand tightening without tools, and the kit includes 2 T-handle knobs with 2 long bolts and 2 short bolts.




