Snow Pusher Parts and Replacements
Snow pusher parts restore a worn edge: wear bars, blades, brackets, mounting blocks and shields, matched by size, material and fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Choice Products 36in Heavy-Duty 2-Wheel Snow Pusher Hand9.7/10View on Amazon - 2
Polotrag 36in Snow Pusher with Dual D-Handle9.6/10View on Amazon - 3
Alpen 36in Snow Pusher Shovel with D-Grip Handle9.6/10View on Amazon
When the edge of a snow pusher stops scraping clean, the pusher leaves a thin layer behind on the drive and the work gets harder with each pass. Snow pusher parts are the replaceable pieces that restore that edge and keep the pusher working as it should: wear bars, scraper bars, cutting edges, replacement blades, mounting blocks, brackets and shields. This guide explains each part, how to match size and material to the pusher on hand, and how to check fit by part number before ordering.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Snow pusher parts: what wears out
The edge that meets the pavement does the hard work, so it wears down ahead of the rest of the pusher. A wear bar or scraper bar takes the scrape, a cutting edge forms the working edge, and a mounting block absorbs impact where the moldboard meets the frame. Brackets hold the parts in place, and a shield covers the plow face.
| Part | What it does | Watch for |
|---|---|---|
| Wear bar and scraper bar | Scrapes the pavement clean at the bottom edge | A thin, rounded or chipped edge |
| Cutting edge | Forms the working edge of a blade or plow | Cracks, chips or a wavy edge |
| Replacement blade | Replaces the full pushing face | A cracked face or a blade that no longer sits flat |
| Mounting block | Absorbs impact and lets moldboard sections follow the pavement | A block that is crushed, split or loose |
| Bracket | Holds a blade or edge to the frame | Bent metal or hardware that will not stay tight |
| Plow shield | Covers and protects the plow face | A shield that is torn or pulling away |
Parts for a plow and parts for a pusher often look alike, so check the listing for the tool on hand. See the snow plow replacement parts guide for plow-specific pieces, and the best snow pusher with wheels roundup for wheeled pushers.
Match the size to the pusher
Length comes before anything else. A wear bar that is short for the blade leaves bare pavement at the ends, and a bar that is long for the blade overhangs the sides. Measure the blade from end to end, then match the part to that length. A WARN wear strip (on Amazon) and a KFI wear bar are listed at 54 inches, a UHMW cutting edge at 48 inches, a Vital poly edge at 42 inches, a Dakota replacement blade at 36 inches, and an EGO scraper bar at 20.2 inches long and 3.03 inches wide.
Thickness and width matter as much as length. The UHMW cutting edge is listed at 3/4 inch thick and 3 inches wide, the Vital poly edge at 2 inches high and 1/2 inch wide, the KFI wear bar at 3/16 inch grade 50 steel, and the plow shield at 28 inches by 96 inches and 1/16 inch thick.
Check the material and the fit
Material sets how a part behaves on pavement. The maker lists the UHMW edge as non-marking on concrete, asphalt, cobblestone and pavers, and as tough in sub-zero temperatures, with no cracking, chipping or warping. The Vital edge uses the same non-marking UHMW poly material. POM, the material of the EGO scraper bar, is listed for wear resistance, heat resistance, strength and rigidity. Steel wear bars, such as the WARN strip in black solid steel and the KFI bar in powder-coated black steel, hold an edge on rough ground. The Dakota blade uses a fiberglass poly blend.
Fit is checked by part number and model, not by appearance alone. The EGO scraper bar is part number ASS2100, listed for EGO Power SNT2112, SNT2100, SNT2102, SNT2110 and SNT2103 21 inch snow blowers, with the part number 2825138001 in the title. The WARN wear strip is part number 39415 for a 54 inch plow blade, the KFI wear bar is part number CC-12-0150 for Cycle Country plow blades, and the MARSHALLTOWN bracket (on Amazon) is part number BRKT682 for the Polar Pusher. For a look at how edges differ by material, see the rubber vs metal snow pusher edge guide, and for choosing the pusher itself, see the manual snow pusher guide.
Mounting blocks and brackets
Mounting blocks sit between the moldboard and the frame, and they take the shock when the pusher meets a raised seam or a frozen ridge. The Mr. Snow Plow block (on Amazon) that replaces Arctic 10206 is listed at 16.5 inches long, 6 inches wide and 1.5 inches thick, for Sectional Sno-Pusher HD models and Sectional Sno-Plow HDPA systems. The light duty block that replaces Arctic 10208 is listed at 13.5 inches long, 6 inches wide and 1.5 inches thick, for Arctic Light Duty Sectional Snow Plows and Sno-Pushers. It is designed strictly for the bottom row of the plow mainframe, and the top row must use the standard, thinner 1 inch thick blocks, part number 10205. The listing states the block comes standard on LD plows manufactured from 2018 to the present. For earlier models it is a retrofit: the listing says pre-2018 models need longer moldboard attachment bolts, while it also says pre-2015 models can use the original hardware, so confirm the bolt requirement against the model year on hand.
Replace a worn edge
Work on flat, dry ground with the pusher or plow set down and stable, and keep the work area clear. Remove the old edge and lay it beside the new part to compare length, thickness and bolt spacing. The Vital poly edge comes with carriage bolts and nuts for installation, so check the box for hardware before starting. The UHMW cutting edge is listed as easy to cut, drill and install, and the maker states it can be trimmed to the exact size using common shop tools, with no special hardware required. Fit the new edge, start the bolts by hand, and tighten them in turn so the edge sits flat along the blade. Keep a spare wear bar or cutting edge where it can be found in winter, with the bolts that fit it. For shovel technique once the pusher is back in service, see how to use a snow shovel.
Safety
Wear eye protection and sturdy shoes, and clear sticks, stones and other debris before working on the pusher. Keep children, pets and bystanders away from the work area, and keep hands clear of the edge while fitting a blade or bar. Follow the manual for the pusher or plow being serviced. See the Safety Disclaimer.
FAQ: mowing large lots
Which snow pusher parts fit a pusher?
Match the part number, the model list and the stated size to the pusher on hand. Check length, thickness and width against the piece being replaced, such as the EGO SNT2112, SNT2100, SNT2102, SNT2110 and SNT2103 models listed for the ASS2100 scraper bar.
What is the difference between a wear bar and a cutting edge?
A wear bar is the replaceable strip at the bottom edge that takes the scrape, while a cutting edge is the working edge of a blade or plow. The terms overlap in listings, so the stated material, thickness and length tell more than the name alone.
Can a poly cutting edge be cut to length?
The UHMW cutting edge in this guide is listed as easy to cut, drill and install, and the maker states it can be trimmed to the exact size using common shop tools.
When should a mounting block be replaced?
Replace a mounting block when it is crushed, split or loose on the frame, or when moldboard sections no longer follow the pavement. Use the block made for the row it sits in, such as the 1.5 inch thick bottom block and the 1 inch thick block, part number 10205, for the top row.
Do snow pusher parts fit a snow blower?
Some do, and some do not. A scraper bar such as the ASS2100 is listed for EGO 21 inch snow blowers, while a Dakota replacement blade is listed as blade only for the Dakota SnoBlade pusher shovel. Check the listing for the tool on hand.
More mowing guides
- Best Snow Pusher with Wheels (2026): 5 Pushers Compared
- Manual Snow Pusher: How to Choose One
- Snow Plow Replacement Parts Guide
- Rubber vs Metal Snow Pusher Edge: Which One Should You Buy?
Use the Mower Matcher to narrow down choices by acreage, terrain, budget, and power type.




