Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Snow Plow Replacement Parts Guide

Snow plow replacement parts, from polyurethane and rubber edges to a steel V-plow edge, matched to your plow by size, fit and driveway surface.

Snow Plow Replacement Parts Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HZSIFU 72 in Polyurethane Snow Plow Cutting EdgeHZSIFU 72 in Polyurethane Snow Plow Cutting Edge9.6/10View on Amazon
  2. 2SIMOND STORE 84 in Rubber Snow Plow Cutting EdgeSIMOND STORE 84 in Rubber Snow Plow Cutting Edge9.6/10View on Amazon
  3. 3ALMULOO 8.5 ft V Plow Cutting Edge for Western and FisherALMULOO 8.5 ft V Plow Cutting Edge for Western and Fisher9.6/10View on Amazon
  4. 4Innconee 48 in Polyurethane Snow Plow Cutting EdgeInnconee 48 in Polyurethane Snow Plow Cutting Edge9.6/10View on Amazon

A worn cutting edge leaves a plow scraping bare metal on concrete and pushing snow in ragged rows. Snow plow replacement parts fix that wear: a fresh edge restores the clean scrape, protects the plow body, and keeps the driveway clear through the season. This guide explains how to measure, match and fit a replacement edge.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

HZSIFU 72 in Polyurethane Snow Plow Cutting Edge

HZSIFU 72 in Polyurethane Snow Plow Cutting Edge

HZSIFU9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Black polyurethane cutting edge, 72 by 4 by 0.75 inches, made for 72-inch ATV and UTV snow pushers.

Who it's for: owners of a 72 in ATV or UTV pusher who want a surface-friendly edge.

Who should skip it: anyone whose pusher is not 72 in wide.

The HZSIFU edge is a black polyurethane cutting edge measuring 72 by 4 by 0.75 inches, made to fit 72-inch ATV and UTV snow pushers. The maker lists it for driveways and sidewalks and says it cuts through snow and handles thin ice layers. It protects the plow body from direct abrasion, and its flexible design reduces vibration.

Pros

  • Matches 72 in ATV and UTV pushers
  • Flexes and resists cracking in cold weather
  • Protects concrete, asphalt and brick from scratches
  • Mounts with standard bolts or screws

Cons

  • Only fits 72 in pushers; measure first
  • No warranty term is stated
  • 0.75 in thick, thinner than the rubber edge here
  • Mounting bolts are not stated as included
SIMOND STORE 84 in Rubber Snow Plow Cutting Edge

SIMOND STORE 84 in Rubber Snow Plow Cutting Edge

SIMOND STORE9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Heavy duty rubber cutting edge, 84 by 6 by 1 inches, for ATV, UTV, tractor and skid steer plows.

Who it's for: owners of wide plows who want the longest straight edge here.

Who should skip it: anyone who needs a V-plow edge, or who does not want to measure, cut and drill an edge to fit.

The SIMOND STORE edge is a heavy duty rubber cutting edge measuring 84 by 6 by 1 inches, listed for ATV, UTV, tractor attachment, loader and skid steer setups. The maker says it glides smoothly across concrete, asphalt, pavers and cobblestone while reducing scraping marks and noise, and guards the equipment against wear, scratches, vibration and impact.

Pros

  • Longest straight edge here: 84 in long, 6 in wide, 1 in thick
  • Fits ATV, UTV, tractor, loader and skid steer setups
  • Corrosion and chemical resistant rubber; will not crack or warp like plastic, per the maker
  • Glides over pavers and cobblestone with less scraping and noise

Cons

  • Needs measuring, cutting and drilling to fit
  • No warranty term is stated on the listing
  • No weight is stated
  • Mounting hardware is not stated
ALMULOO 8.5 ft V Plow Cutting Edge for Western and Fisher

ALMULOO 8.5 ft V Plow Cutting Edge for Western and Fisher

ALMULOO9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

8.5 ft high-strength steel V-plow cutting edge with mounting accessories, made for Western MVP Plus and Fisher XV and XV2 plows.

Who it's for: owners of a Western MVP Plus or Fisher XV or XV2 plow.

Who should skip it: anyone with a Western MVP plow.

The ALMULOO edge is an 8.5 ft high-strength steel V-plow cutting edge made for Western MVP Plus and Fisher XV and XV2 plows, replacing part numbers 44997 and 44894. The maker lists it as durable and highly impact-resisting, with a black powder coating surface for long use, and its V shape diverts snow to both sides. The set includes mounting accessories, with professional installation strongly recommended.

Pros

  • V shape diverts snow to both sides, per the maker
  • Black powder coating suits long use
  • Mounting accessories are included in the set
  • Replaces stated part numbers 44997 and 44894

Cons

  • Stated weight is 89.3 lb
  • Professional installation is strongly recommended
  • Instructions are not included
  • Fits only Western MVP Plus and Fisher XV and XV2
Innconee 48 in Polyurethane Snow Plow Cutting Edge

Innconee 48 in Polyurethane Snow Plow Cutting Edge

Innconee9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Yellow polyurethane cutting edge, 48 by 4 by 0.75 inches, rated flexible in cold down to minus 50 degrees Fahrenheit.

Who it's for: owners of a smaller plow who want a light, surface-friendly edge for deep cold.

Who should skip it: anyone who wants a pre-drilled edge.

The Innconee edge is a yellow polyurethane cutting edge measuring 48 by 4 by 0.75 inches, made to fit ATV, UTV, tractors and skid steers. The maker lists it as wear, impact and tear resistant and built to stay flexible in cold down to minus 50 degrees Fahrenheit. The maker gives two sizes for this edge, 48 by 4 by 0.75 inches and 49.41 by 6.1 by 1.38 inches; check before ordering. It arrives as an undrilled blank to cut and drill with standard power tools.

Pros

  • Stays flexible in cold down to minus 50 degrees Fahrenheit
  • Helps protect concrete, pavers and cobblestone; maker says it helps prevent steel-edge rust marks
  • Absorbs impacts and vibration, runs quieter over raised joints
  • Maker lists weight as 8.82 lb and it can be cut to length

Cons

  • Undrilled blank needs cutting and drilling to fit
  • Smallest length here at 48 in
  • 0.75 in thick, thinner than the 1 in rubber edge here
  • Mounting hardware is not stated as included

Snow plow replacement parts: start with the cutting edge

The cutting edge is the strip along the bottom of the plow blade that meets the driveway. It takes the wear so the blade does not: makers here list their edges as protecting the plow body and equipment from wear. When an edge wears thin, that protection is lost.

Measure the edge before you order

Measure the old edge end to end, then its width and thickness. The three straight edges here run 48 inches, 72 inches and 84 inches long, with widths of 4 inches or 6 inches and thicknesses of 0.75 inches or 1 inch. The V-plow edge is sized for 8.5 ft plows, so match it by plow model and part number. The Innconee edge (on Amazon) arrives undrilled and can be cut and drilled with standard power tools, using the old edge as a template. Check the hole spacing before ordering.

Match the material to your driveway

Match the material to your surfaces, using maker statements. The HZSIFU black polyurethane edge is listed for concrete, asphalt and brick, and its maker says it resists cracking in cold weather and clears snow without scratching the ground. The Innconee yellow polyurethane edge is listed for concrete, pavers and cobblestone and stays flexible in cold down to minus 50 degrees Fahrenheit. The SIMOND STORE rubber edge (on Amazon) is listed for concrete, asphalt, pavers and cobblestone, and its maker says it reduces scraping marks and noise. The ALMULOO steel V-plow edge (on Amazon) has a black powder coating; its maker says the V shape diverts snow to both sides.

Check the fit before you buy

Fitment is the step that stops most returns. The HZSIFU edge is made for 72-inch ATV and UTV snow pushers. The SIMOND STORE edge fits ATV, UTV, tractor attachment, loader and skid steer setups. The Innconee edge fits ATV, UTV, tractors and skid steers. The ALMULOO edge is the narrowest fit: it is an 8.5 ft V-plow edge made for Western MVP Plus and Fisher XV and XV2 plows, replaces part numbers 44997 and 44894, and is not compatible with Western MVP.

Matching snow plow replacement parts to your plow

The edge does the scraping, so match its length and material to the plow and the driveway before you order.

FAQ: mowing large lots

How do I know my snow plow cutting edge needs replacing?

Replace the edge when it has worn thin and no longer protects the plow body.

What size cutting edge fits my plow?

Measure the old edge end to end and match that length, then check width and thickness the same way. The straight edges in this guide run 48 inches, 72 inches and 84 inches long. Match the 8.5 ft V-plow edge by plow model and part number.

Can I cut a polyurethane cutting edge to fit?

The Innconee edge can: it is an undrilled blank that can be cut and drilled with standard power tools, using the old edge as a template. Check maker statements before cutting any other edge.

Does a steel cutting edge scratch a concrete driveway?

The steel edge here is the ALMULOO V-plow edge, listed for snow and road debris with no driveway-protection claim. Where marks matter, compare maker claims: HZSIFU says its edge clears without scratching the ground, and SIMOND STORE says its rubber edge reduces scraping marks.

Do replacement cutting edges come with mounting hardware?

It depends on the edge. The ALMULOO set includes mounting accessories. The HZSIFU edge mounts with standard bolts or screws. The SIMOND STORE edge is measured, cut and drilled, then attached to the existing setup. Confirm hardware for the Innconee blank before ordering.

More mowing guides

See the tow-behind attachments hub for more plow and attachment guides.

More buying guides

Tow-Behind Attachments ·

Box Blade Replacement Parts Guide

Box blade replacement parts matched by shank length, hole spacing, tooth taper and pin fit for grading and leveling work.

Trimmers and Blowers ·

String Trimmer Replacement Parts Guide

Match the spool to the trimmer model, check the 0.065-inch line and the pack contents, and keep the trimmer cutting with a fresh spool.

Mower Maintenance ·

Lawn Mower Replacement Parts Guide

A plain guide to the filters, plugs, blades, belts, and spindles that wear out on a mower, and how to match each part before…