Utility Cart Replacement Parts: Wheels and More
A plain guide to utility cart replacement parts: measure the axle and thread, match the load, and pick a wheel or caster that fits the cart.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Pontuss 13 in Flat Free Wheels for GOR Garden Carts9.7/10View on Amazon - 2
ASOMWLS 4 in Rubber Caster Wheels, 1200 lb Set9.6/10View on Amazon - 3
WHARSTM 3 in Locking Swivel Stem Casters, Set of 49.5/10View on Amazon
On a property with a lawn, beds and a vegetable patch, the garden cart does the heavy hauling: soil, firewood and tools all ride in the same bed. When a wheel goes flat, a tire cracks or a caster seizes, the cart sits idle. Utility cart replacement parts are the fix: a wheel or caster that matches the axle, the hub and the load puts the cart back to work. This guide shows how to measure the axle, hub and thread and pick a part that fits.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Pontuss 13 in Flat Free Wheels for GOR Garden Carts
Flat-free 13 in wheels with 4.00-6 solid tires, 5/8 in and 3/4 in bearings, and a 300 lb static load per wheel for GOR garden carts and Gorilla carts.
Who it's for: owners of GOR garden carts and Gorilla carts who want to end flats and inflation.
Who should skip it: anyone whose axle and hub do not match the stated sizes.
The Pontuss wheels are the closest match to a garden cart in this group: 13 in flat-free wheels with 4.00-6 solid tires, a 2.17 in hub, and a pre-installed 5/8 in bearing plus a spare 3/4 in bearing. The maker rates each wheel at a 300 lb static load, and the steel rims and polyurethane tires are made to stay round when a cart sits stacked for months. Rubber dust pads protect the bearings from dust and water vapor.
Pros
- Flat-free solid tires need no air, so flats and blowouts are gone
- 300 lb static load per wheel, with steel rims and polyurethane tires
- Fits 5/8 in and 3/4 in axles, with a spare bearing in the pack
- Stays round when a cart sits stacked for months, per the maker
Cons
- Measure the axle and frame clearance first; the wrong bearing size will not fit
- Only a static load of 300 lb per wheel is stated, with no moving load given
- The 13 in size suits GOR and Gorilla carts, so other carts need a fit check first
- Wheel weight is not stated

ASOMWLS 4 in Rubber Caster Wheels, 1200 lb Set
Rubber caster wheels with a 1200 lb set capacity, a 4 in wheel, a 1.25 in tread and a precision ball bearing for carts, dollies and trolleys.
Who it's for: owners moving heavy loads on carts, dollies and trolleys.
Who should skip it: anyone who needs a stated warranty term, or anyone whose axle does not match the 0.394 in bore.
The ASOMWLS casters are the heavy lifters here: a set of 4 rubber caster wheels with a 1200 lb set capacity, a 4 in wheel, a 1.25 in tread, a 0.394 in axle bore and a 1.63 in hub. The rubber tread sits on a polyolefin core, and the maker rates the wheels from -20°F to 180°F. At the 4 in size each wheel carries 300 lb.
Pros
- 1200 lb set capacity, with 300 lb per wheel at the 4 in size
- Rubber tread on a polyolefin core rolls quietly and will not mark floors
- Rated from -20°F to 180°F for cold and hot use
- Precision ball bearing keeps the wheels rolling smoothly
Cons
- No warranty term is stated
- Sizes run 3 in, 3.5 in, 4 in and 5 in, so the wrong size is easy to order by mistake
- Axle bore is 0.394 in, so the axle must match that bore
- Hub length of 1.63 in needs a frame check before ordering

WHARSTM 3 in Locking Swivel Stem Casters, Set of 4
Locking swivel stem casters with a 3/8 in-16 thread, a 1 in stem and a 400 lb set capacity for furniture and workbenches.
Who it's for: owners who need locking casters on a workbench, shelf or cabinet with a 3/8 in-16 mount.
Who should skip it: anyone fitting a garden cart, or anyone who needs more than 100 lb per caster.
The WHARSTM casters are threaded stem casters for furniture and workbenches: a set of 4 with 3 in wheels, a 3/8 in-16 thread, a 1 in stem and a 360-degree swivel with a locking brake. Each caster carries 100 lb, so the set supports 400 lb in total, and the non-marring rubber wheels roll quietly without marking floors.
Pros
- Locking swivel casters with a brake hold the bench or cart in place
- 400 lb total set capacity, with 100 lb per caster
- Non-marring thermoplastic rubber wheels will not scratch hardwood, tile or laminate floors
- Set of 4 comes with nuts and wrenches for fitting
Cons
- No warranty term is stated
- Threaded stem fits only 3/8 in-16 mounts, so the mount must be checked first
- Built for furniture and workbenches, so cart use needs a thread and load check first
- 100 lb per caster suits light loads only
Utility cart replacement parts: measure before you order
The axle diameter, the hub length and the thread size decide the fit. The table below lines up the 3 parts in this guide on size, load and fit.
| Part | Size | Load | Fit |
|---|---|---|---|
| Pontuss flat free wheels | 13 in | 300 lb static per wheel | GOR garden carts, Gorilla carts |
| ASOMWLS rubber caster wheels | 4 in | 1200 lb set | Carts, dollies, trolleys |
| WHARSTM locking stem casters | 3 in | 400 lb set | Furniture, workbenches |
The rest of this guide walks through each measurement in turn. For the carts themselves, see the tow-behind attachment guides.
Step 1: measure the axle and hub
Pull the old wheel off and measure the axle, then the hub length and the frame clearance around it. The Pontuss wheels (on Amazon) need a 5/8 in or 3/4 in axle and a 2.17 in hub. The ASOMWLS casters (on Amazon) need a 0.394 in axle bore and a 1.63 in hub. A part that is close but not exact will wobble or bind, so measure twice before ordering.
Step 2: match the load to the job
A Pontuss wheel carries a 300 lb static load. The ASOMWLS set carries 1200 lb in total, with 300 lb per wheel at the 4 in size. The WHARSTM set carries 400 lb in total, with 100 lb per caster. A cart that hauls firewood and soil suits the higher rating, while a cart that moves tools and pots can use the lighter set.
The gear: wheels and casters for the fix
With the axle, hub and load measured, the parts below cover the common fixes.
Step 3: fit the part and check the roll
Fit the part with the hardware that comes with it: the WHARSTM set includes nuts and wrenches, and the Pontuss wheels include spacers and pins. Tighten the fasteners, set the cart on flat ground and push it to check for wobble or drag. A wheel that binds or a caster that will not swivel needs the fit checked again before the cart is loaded.
Safety
Wear gloves when fitting wheels and casters, and keep hands clear of pinch points around the axle and hub. Chock the cart so it cannot roll while a wheel is off, and never load a cart past its rated capacity. Check the fasteners after a loaded trip.
FAQ: mowing large lots
What size replacement wheel fits a GOR garden cart?
A 13 in flat-free wheel with a 4.00-6 solid tire fits, with a 5/8 in bearing or the spare 3/4 in bearing and a 2.17 in hub.
How much weight can a 13 in flat free cart wheel carry?
The maker rates each Pontuss wheel at a 300 lb static load. That is the load at rest, so leaving room under the rating is wise on rough ground.
Do flat free wheels need air?
No. Flat-free wheels use solid tires, so there is no air to check and no blowout to worry about.
What thread size fits a threaded stem caster?
The WHARSTM casters (on Amazon) use a 3/8 in-16 thread with a 1 in stem. Check the mount before ordering, since a different thread will not screw in.
Can rubber caster wheels handle cold weather?
The ASOMWLS rubber caster wheels are rated from -20°F to 180°F, so cold barns and hot sheds sit within the stated range.




