Tow Chain Grade 70 vs 43: Which One Should You Buy?
Grade 70 chains in this guide carry a 6,600 lbs working load limit and a 26,400 lbs break strength on the 3/8 inch sizes, with grab hooks on the binder chains and clevis snap hooks on the safety chain.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Rhino USA Recovery Tow Strap 3 in x 20 ft9.5/10View on Amazon - 2
VEVOR G80 Transport Binder Chain 3/8 in x 20 ft9.5/10View on Amazon - 3
VEVOR G80 Transport Binder Chain 3/8 in x 10.3 ft9.5/10View on Amazon - 4
WFLNHB Grade 70 Tow Chain 5/16 x 10 FT 15 J Hook Mini J HookView on Amazon - 5
Koch 817391View on Amazon
A trailer that comes loose on the road is the kind of trouble that starts with a small part, and the safety chains are the part that has to hold when the hitch does not. That is what tow chain grade 70 vs 43 asks: which grade belongs on the trailer. No grade 43 chain is compared here, so this guide states what the grade 70 chains in this set list, and shows how to read the grade marking on the chain: the 3/8 inch chains state a 6,600 lbs working load limit and a 26,400 lbs break strength, while the 5/16 inch safety chain states an 18,800 lbs break strength and no working load limit.
Other machines to compare
WFLNHB Grade 70 Tow Chain 5/16 x 10 FT 15 J Hook Mini J HookCheck price on Amazon
Koch 817391Check price on Amazon
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Tow chain grade 70 vs 43: what the listings state
Grade 70 is the transport grade in these listings. The Mytee, BLACKHORSE-RACING and Digank listings all state a 3/8 inch grade 70 chain with a 6,600 lbs working load limit and a 26,400 lbs break strength, and the BLACKHORSE-RACING listing states a 4:1 safety factor and heat treatment to meet DOT and CVSA specifications for truck tie-down. The Tnyeobae listing states a 35 inch safety chain in a 2 pack, also grade 70, with an 18,800 lbs break strength and 5/16 inch clevis snap hooks. Grade 43 does not appear in the listings compared here, so this guide compares the grade 70 chains on their stated figures and shows how to read the grade marking on the chain.
| Chain | Stated length | Working load limit | Break strength | Hooks |
|---|---|---|---|---|
| Tnyeobae 35 inch safety chain, 2 pack | 35 inch | Not stated | 18,800 lbs | 5/16 inch clevis snap hooks |
| Mytee Products 3/8 inch x 6 ft binder chain, 2 pack | 6 ft | 6,600 lbs | 26,400 lbs | Clevis grab hooks |
| BLACKHORSE-RACING 3/8 inch x 10 ft binder chain | 10 ft | 6,600 lbs | 26,400 lbs | G70 clevis grab hooks |
| Digank 3/8 inch x 10 ft transport chain | 10 ft | 6,600 lbs | 26,400 lbs | Grab hooks |
The binder chains in this set share the same 3/8 inch size, the same 6,600 lbs working load limit and the same 26,400 lbs break strength, and differ mainly in length and pack size, while the Tnyeobae chain is a shorter safety chain with a lower break strength and snap hooks for the hitch loops. Check the grade marking on the chain itself: the Digank listing states a yellow galvanized coating with clear grade markings, and the BLACKHORSE-RACING listing states a protective coating with a smooth finish and weather resistance.
Step 2: match the working load limit to the load
The working load limit is the figure that decides the match. The Mytee, BLACKHORSE-RACING and Digank listings state a 6,600 lbs working load limit, and the BLACKHORSE-RACING listing warns never to exceed the working load limit for any chain, tie-down or cargo control device. The 4:1 safety factor in the BLACKHORSE-RACING listing is the ratio behind the stated figures: a 26,400 lbs break strength against a 6,600 lbs working load limit. Use the working load limit, not the break strength, when you match the chain to the load, and check the limit on the chain you own before every haul.
The Tnyeobae listing states a break strength and no working load limit, so the limit for that chain is not stated here. Treat a chain with no stated working load limit as a safety chain for the trailer, not as a binder chain for a load, and follow the trailer manual for the setup.
Step 3: check the hooks and the length
Hooks and length decide whether the chain fits the job. The Mytee, BLACKHORSE-RACING and Digank listings state a grab hook on each end, and the Tnyeobae listing states a 5/16 inch spring-loaded clevis snap hook for attachment to the tow vehicle hitch loops, with a note to verify the hitch bracket hole size for the heavy-duty 5/16 inch hooks. Lengths in this set run from a 35 inch safety chain to a 6 ft binder chain and a 10 ft binder chain, so measure the reach from the trailer to the hitch before you order. The Tnyeobae 2 pack covers the cross-chain safety configuration the listing describes, with a chain on each side of the hitch.
Step 4: store the chain so it stays ready
The Tnyeobae listing states a yellow zinc-plated finish for resistance to rust and road salt, and the Digank listing states a zinc plated finish to resist rust, colored gold to meet California Highway Patrol requirements. Store the chain dry and off the ground, with the hooks closed, and check the grade markings and the hooks before each use. See the quick hitch vs pin hitch guide for the hitch hardware that pairs with these chains, and the best garden tractor quick hitch pin under 30 picks for pins that fit the hitch.
What to check on the listing before you buy
Read the listing in this order: length, working load limit, break strength, hooks, coating and warranty. Lengths here are 35 inch, 6 ft and 10 ft; the working load limit is 6,600 lbs on the binder chains and not stated on the safety chain; the break strength is 26,400 lbs on the binder chains and 18,800 lbs on the safety chain. Hooks are grab hooks on the binder chains and clevis snap hooks on the safety chain. Coatings are yellow zinc plating on the Tnyeobae chain, zinc plating on the Digank chain and a protective coating on the BLACKHORSE-RACING chain. Warranties are stated on 2 of the listings: Tnyeobae states a 12 Month warranty and BLACKHORSE-RACING states a 1 Year Manufacturer warranty, while the Mytee listing states no warranty term and the Digank listing states warnings instead of a warranty term.
Safety
Never exceed the working load limit, and never use a transport chain for overhead lifting: the BLACKHORSE-RACING listing states the chain is not approved for overhead lifting, and the Digank listing states the chain is not OSHA compliant for overhead lifting and warns against shock loads and side loads. Keep children, pets and bystanders away from the work area while you hook up, and check that each grab hook seats fully on the tie-down point before you move. Follow the chain maker instructions and the trailer manual for the cross-chain setup.
FAQ: mowing large lots
How long is a tow chain?
The listings compared here state a 35 inch safety chain, a 6 ft binder chain and a 10 ft binder chain. Measure the reach from the trailer to the hitch and pick the length that fits with slack for turns.
What does grade 70 mean on a tow chain?
Grade 70 is the transport grade in these listings. The Tnyeobae listing describes its grade 70 chains as heat-treated alloy steel, the BLACKHORSE-RACING listing states heat treatment to meet DOT and CVSA specifications for truck tie-down, and the Digank listing states its chain meets DOT specifications for transport, with a yellow galvanized coating and clear grade markings so the grade reads on the chain itself. The 3/8 inch chains state a 6,600 lbs working load limit and a 26,400 lbs break strength.
Can a grade 70 chain lift overhead?
No. The BLACKHORSE-RACING listing states the chain is not approved for overhead lifting, and the Digank listing states the same for its chain. Use the chain for tie-down and towing only.
How do you set up safety chains?
The Tnyeobae listing describes a cross-chain safety configuration, with a chain on each side of the hitch and a 5/16 inch spring-loaded clevis snap hook at each hitch loop. Verify the hitch bracket hole size for the hooks before you tow.
What is the working load limit of a 3/8 inch grade 70 chain?
6,600 lbs in the Mytee, BLACKHORSE-RACING and Digank listings, with a 26,400 lbs break strength and a 4:1 safety factor stated in the BLACKHORSE-RACING listing.




