Types of Hitch Pins for Tow-Behind Equipment
R-clips hold hitch pins in place, and the right one matches the pin size, the material and the job it has to hold.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ALLECIN 90-Piece R-Clip Assortment Kit 8 Sizes9.6/10View on Amazon - 2
Generic 44-Piece R-Clip Cotter Pins M2.5x50mm9.6/10View on Amazon - 3
Bonsicoky 4-Piece R-Clips M3.5x75mm Stainless Steel9.6/10View on Amazon - 4
Feanron 20-Piece R-Clips M2.5x55mm Carbon Steel9.5/10View on Amazon
A hitch pin holds the drawbar to the tractor, the trailer to the mower, or the cart to the tow bar, and the pin stays in place because a small clip holds it there. Types of hitch pins covers the clips that do that job: R-clips, also called hairpin cotter pins, that slide through the cross hole in the pin, with the curved leg pressing against the pin. Match the clip size to the pin before you order.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

ALLECIN 90-Piece R-Clip Assortment Kit 8 Sizes
90-piece R-clip assortment in 8 sizes, M1x18 to M4x75, in 304 stainless steel.
Who it's for: owners who service several machines with different pin sizes.
Who should skip it: anyone who needs only one size and wants a single-size pack.
The ALLECIN kit holds 90 R-clips in 8 sizes, from M1x18 to M4x75, in 304 stainless steel. The hairpin design holds bolts and pins and prevents relative rotation, and the listing says the clips are hard to break and resist corrosion, wear and rust. The set fits tractors, farm equipment, engines, trucks, cars, campers and lawn and garden equipment.
Pros
- 90 clips across 8 sizes, M1x18 to M4x75
- 304 stainless steel resists rust and wear, per the listing
- Hairpin design holds pins and prevents relative rotation
- Fits tractors, trailers, campers and lawn equipment
Cons
- Eight sizes to sort when you need one clip
- Assortment holds sizes a single-pin owner may never use
- Warranty term is not stated on the listing
- Small clips in the set suit light pins, not heavy hitch pins

Generic 44-Piece R-Clip Cotter Pins M2.5x50mm
44 matching R-clips in one size, M2.5x50mm, in 304 stainless steel.
Who it's for: owners who use one pin size over and over.
Who should skip it: anyone who needs several sizes or a larger clip.
The Generic pack holds 44 matching hairpin R-clips in one size, M2.5 by 50mm, about 0.1 by 2 inches, in 304 stainless steel. The straight leg passes through a cross-drilled hole while the curved wave leg stays outside and presses against the pin, which holds hitch, clevis and linkage pins during movement and vibration. The pack suits users who repeatedly need the same replacement clip.
Pros
- 44 matching clips for repeated replacement
- 304 stainless steel for corrosion resistance
- Straight leg passes through the cross hole, curved leg holds the pin
- Fits tractors, mowers, trailers and garden carts
Cons
- One size only; other pins need another pack
- 44 clips of one size is more than a one-pin owner needs
- Warranty term is not stated on the listing
- Small M2.5 wire suits light pins, not the largest hitch pins

Bonsicoky 4-Piece R-Clips M3.5x75mm Stainless Steel
4 R-clips at M3.5 x 75mm in stainless steel with a galvanized surface.
Who it's for: owners with larger pins who need a big clip.
Who should skip it: anyone who needs many clips or smaller sizes.
The Bonsicoky set holds 4 R-clips at M3.5 by 75mm in stainless steel with a galvanized surface for rust and corrosion resistance. The spring clips clamp the hitch pins with a strong clamping force and do not fall off easily after fixing, per the listing. The clips fit lawn mowers, trailers, campers, RVs, trucks, automobiles and agricultural machinery.
Pros
- Large M3.5 x 75mm size for bigger pins
- Stainless steel with galvanized surface against rust
- Strong clamping force holds hitch pins in place
- Fits mowers, trailers, campers, RVs and trucks
Cons
- Only 4 clips in the pack
- One size only; other pins need another pack
- Warranty term is not stated on the listing
- M3.5 size suits larger pins, not small linkage pins

Feanron 20-Piece R-Clips M2.5x55mm Carbon Steel
20 R-clips at M2.5x55mm in carbon steel with a rust-resistant coating.
Who it's for: owners who want a strong carbon steel clip.
Who should skip it: anyone who needs stainless steel or more than 20 clips.
The Feanron pack holds 20 R-clips at M2.5 by 55mm in carbon steel with a rust-resistant coating and a zinc color. The R-clip shape gives fastening that stops accidental loosening during vibration or heavy use, and the listing calls out heavy duty strong spring tension. The clips fit trailers, tractors, mowers, carts and trucks.
Pros
- Carbon steel for strength and long use
- Heavy duty spring tension holds under vibration
- Rust-resistant coating extends service life
- Installs and removes without special tools
Cons
- Carbon steel, not stainless steel
- One size only; other pins need another pack
- Warranty term is not stated on the listing
- 20 clips is fewer than the 44 and 90-clip packs here
Types of hitch pins: R-clips and hairpin cotter pins
The clips in this guide are all one type: the R-clip, also called a hairpin cotter pin. It is a length of spring wire bent into an R shape, with a straight leg and a curved wave leg. The straight leg passes through a cross-drilled hole in the hitch pin, while the curved leg stays outside and presses against the pin, which keeps the pin from working its way out. The differences between the clips below are size, material and pack: single-size packs for one pin, an assortment that covers a range of pins, stainless steel for corrosion resistance, and carbon steel for strength.
An R-clip holds a pin, it does not lock it. A locking hitch pin is a different part with a lock built in, and a shear pin is a different part again that breaks on purpose to protect the machine. See the guide on what a shear pin is for that part, and the clevis pin vs bolt comparison for the pin the clip holds.
Match the clip to the pin
Two measurements decide the fit: the wire diameter and the overall length of the clip. The clips below run from M1x18 to M4x75 in the assortment kit, with single-size packs at M2.5x50mm, M2.5x55mm and M3.5x75mm. A clip with too thin a wire will not fill the cross hole, and a clip that is too short will not reach through the pin. Check the cross-hole diameter and the required clip length before ordering, as the listing advises.
Material is the second choice. The ALLECIN and Generic clips (on Amazon) here are 304 stainless steel, which the listings give for corrosion resistance in outdoor use. The Bonsicoky clips (on Amazon) are stainless steel with a galvanized surface. The carbon steel clip is made for strength and long use, with a rust-resistant coating and a zinc color.
The gear for keeping a hitch pin in place
Each of these four packs handles a different part of the job: an assortment that covers many pin sizes, a single-size pack for repeated replacement, a large clip for bigger pins, and a carbon steel clip for strength.
How to fit an R-clip
Line the pin up in the hitch, then push the straight leg of the clip fully through the cross hole until the curved retaining leg seats against the outside of the pin. No special tools are needed to fit or remove it. Check that the curved leg seats against the pin before you move the equipment.
Keep spare clips in the toolbox, since a lost clip leaves a pin with nothing holding it. The single-size pack suits owners who use one pin size over and over, while the assortment kit suits owners who service several machines with different pins.
Safety
Check every clip before you tow: the straight leg must pass fully through the cross hole and the curved leg must sit against the pin. A clip that is bent, stretched or loose will not hold the pin, so replace it with a matching clip before you move the equipment. See the tow-behind attachments reviews for the gear that goes with these clips.
FAQ: mowing large lots
What is an R-clip hitch pin?
An R-clip is a spring wire clip shaped like the letter R, also called a hairpin cotter pin. The straight leg passes through a cross-drilled hole in a hitch pin, and the curved wave leg stays outside and presses against the pin, which keeps the pin from sliding out.
What size R-clip do I need?
Match the wire diameter and the overall length to the cross hole in your pin. The single-size packs here are M2.5x50mm, M2.5x55mm and M3.5x75mm, and the assortment kit covers M1x18 to M4x75. Check the cross-hole diameter, clearance and required length before ordering.
Are stainless steel R-clips better than carbon steel?
Each suits a different job. The ALLECIN and Generic clips here are 304 stainless steel, which the listings give for corrosion resistance in outdoor use. The Bonsicoky clips are stainless steel with a galvanized surface. The carbon steel clip is made for strength and long use, with a rust-resistant coating.
Do I need tools to fit an R-clip?
No special tools are needed. Push the straight leg fully through the cross hole until the curved retaining leg seats against the outside of the pin. The spring shape holds the clip in place.




