What Are Chainsaw Chaps and Who Needs Them
Chainsaw chaps are layered leg protection made to slow or stop a moving chain: what they are made of, how they fit and four picks for property work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YARDMARIS Technical Wrap Chainsaw Chaps 8 Layers UL Class A9.7/10View on Amazon - 2
ZELARMAN Chainsaw Chaps Apron 8-Layer UL Certified9.6/10View on Amazon - 3
Husqvarna Technical Apron Wrap Chainsaw Chaps 5 Layers9.6/10View on Amazon - 4
FORESTER Chainsaw Chaps Apron Style 4-Ply Adjustable Waist9.6/10View on Amazon
A chainsaw makes short work of a fallen limb, a fence line full of saplings and a winter woodpile, and the same bar that cuts so fast can catch a leg if footing slips or a step lands in the path of the cut. That risk is why leg protection belongs with the saw, the fuel and the plan for the cut. This guide explains what are chainsaw chaps, what they are made of, how they work and how to pick a pair that fits your saw work.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

YARDMARIS Technical Wrap Chainsaw Chaps 8 Layers UL Class A
Technical wrap chaps with 8 layers, a UL Class A listing, a 1050D shell and reflective stripes.
Who it's for: owners who want an 8-layer system with UL Class A stated.
Who should skip it: anyone outside the two listed sizes.
The YARDMARIS chaps list 8 layers, 6 anti-cut and 2 cushioning, inside a 1050D polyester shell with a PU coating. The maker lists UL Class A with ASTM F1897-20 and ASTM F3325-20 and OSHA 1910-266 compliance, plus YKK or ITW buckles and 3M reflective stripes.
Pros
- 8-layer system with 6 anti-cut layers and 2 cushioning layers
- UL Class A with ASTM F1897-20 and ASTM F3325-20 stated
- 1050D shell with PU coating, YKK or ITW buckles, 3M stripes
- Two pockets; Medium 36 to 38 in or Large 40 to 42 in
Cons
- Only two sizes listed: Medium 36 to 38 in, Large 40 to 42 in
- No weight is stated on the listing
- No warranty term is stated on the listing
- Orange and black is the only color listed

ZELARMAN Chainsaw Chaps Apron 8-Layer UL Certified
Apron chaps with 8-layer protection, UL certification and a waist that adjusts to 51 inches.
Who it's for: larger owners who need the widest waist fit and full 8-layer protection.
Who should skip it: anyone who needs a shorter length or pockets.
The ZELARMAN chaps pair 8-layer protection with the widest waist here, adjustable to 51 in. UL certification covers ASTM F3325-20, ASTM F1897-20, OSHA 1910.266 and ANSI Z133.1, with a 1000-denier Oxford polyester outer. The full length is 42 in from waist to instep.
Pros
- 8-layer protection that the maker describes as made to slow and stop a running chain
- UL certified; ASTM F3325-20, ASTM F1897-20, OSHA 1910.266, ANSI Z133.1
- 1000-denier Oxford polyester outer
- Adjustable waist fits up to 51 in, the widest here
Cons
- Only one length is listed, 42 in from waist to instep
- No pockets are stated
- No reflective stripes are stated
- Orange and black is the only color listed

Husqvarna Technical Apron Wrap Chainsaw Chaps 5 Layers
Apron wrap chaps with 5 layers of Tek Warp, a gear pocket and a stated weight of 4.0 pounds.
Who it's for: owners who want a known saw brand, a wedge pocket and a stated weight.
Who should skip it: anyone with a waist over 42 in.
The Husqvarna chaps use 5 layers of Tek Warp in a 1000 Denier polyester shell with a PVC coating. The pull-apart design is made to clog the sprocket to slow or stop the chain, per the maker, with ASTM F1897, ANSI Z133.1, OSHA 1910-266 and UL certification. It is the only pick here with a stated weight, 4.0 pounds, and it has a felling wedge and gear pocket.
Pros
- 5 layers of Tek Warp; pull-apart design made to clog the sprocket to slow or stop the chain
- 1000 Denier polyester with PVC coating
- Meets ASTM F1897, ANSI Z133.1 and OSHA 1910-266, UL certified
- Felling wedge and gear pocket; stated weight 4.0 pounds
Cons
- 5 layers, fewer than the 8 layers on the top two picks
- Waist only up to 42 in, below the 51 in ZELARMAN
- No reflective stripes are stated
- One size range only, 40 to 42 in

FORESTER Chainsaw Chaps Apron Style 4-Ply Adjustable Waist
Apron chaps with 4-ply Oxford polyester, three lengths and a waist that adjusts from 30 to 48 inches.
Who it's for: owners who want the most length choices and a repellent shell.
Who should skip it: anyone who wants an 8-layer system.
The FORESTER chaps come in three lengths, 35, 37 and 40 in, with a flip belt that shortens by up to 2 in. The waist adjusts from 30 to 48 in with leg straps, and the 4-ply Oxford polyester shell is water and oil repellent with a deep utility pocket.
Pros
- Meets OSHA 1910.266, ASTM F1897 and CAN/BNQ Class B standards
- Three lengths, 35, 37 and 40 in; flip belt shortens by up to 2 in
- Adjustable waist from 30 to 48 in with leg straps
- Water and oil repellent shell with a deep utility pocket
Cons
- Maker lists a 4-ply Oxford outer rather than a 5-layer or 8-layer protective system
- No warranty term is stated on the listing
- No reflective stripes are stated
- Waist tops out at 48 in, below the 51 in ZELARMAN
What are chainsaw chaps made of
Chainsaw chaps are leg protection worn over work pants, built from layers of fibers inside a tough outer shell. The four picks in this guide list different constructions: a 4-ply Oxford polyester outer on the FORESTER, 5 layers of Tek Warp protective material on the Husqvarna, and 8-layer systems on the ZELARMAN and the YARDMARIS, which pairs 6 anti-cut layers with 2 cushioning layers. Those counts describe different constructions, so they are not by themselves a ranking of protection. Outer shells include 1000-denier Oxford polyester, 1000 Denier polyester with a PVC coating, and 1050D polyester with a PU coating.
How chainsaw chaps slow a chain
Makers describe the protection in different words. Husqvarna describes a pull-apart design made to clog the sprocket system and slow or stop the chain from rotating. ZELARMAN describes 8-layer material made to slow and stop a running chain, and FORESTER describes cut-resistant layers made to reduce the severity of injury on contact with a rotating saw. Apron styles shield the front of the legs, while a wrap style closes around the leg. Chaps are made to reduce the risk or the severity of an injury, not to make contact with a running chain safe. They work with the rest of your saw gear, not in place of it. The chainsaw safety gear guide covers the full set.
How to choose the right fit
Fit starts with two measures: waist and length. Waists in this guide run from an adjustable 30 to 48 in on the FORESTER, up to 42 in on the Husqvarna, and up to 51 in on the ZELARMAN. The length figures are not all measured the same way: the FORESTER and Husqvarna give overall length from waist to ankle, the ZELARMAN gives 42 in from waist to instep, and the YARDMARIS gives size ranges, Medium 36 to 38 in and Large 40 to 42 in. Two picks shorten by up to 2 in, the FORESTER with a flip belt and the ZELARMAN by folding the waistband. The FORESTER apron is open at the back for quick on and off, the Husqvarna is an apron wrap, and the YARDMARIS technical wrap (on Amazon) closes around the leg. Check the size row on the pair you pick before ordering.
Four chainsaw chaps for property work
Each pair below covers the step this guide describes: layered fibers in front of your legs while you run the saw, with the fit, pockets and visibility to match the job.
Safety
Wear eye and hearing protection and sturdy boots, and clear debris from the cutting area before you start the saw. Keep children, pets and bystanders away from the work area, and for a gas saw refuel only with the engine off and cool. Apron chaps shield the front of your legs and a wrap style closes around the leg; neither protects your hands, feet or head, so pair them with gloves, boots and a helmet. The chainsaw safety helmet guide covers head protection.
FAQ: mowing large lots
What are chainsaw chaps made of?
Layered fibers inside a tough outer shell. The picks here list a 4-ply Oxford polyester outer, 5 layers of Tek Warp material, and 8-layer systems, with shells that include 1000-denier Oxford polyester, 1000 Denier polyester with a PVC coating, and 1050D polyester with a PU coating.
Do chainsaw chaps stop a chainsaw?
Makers describe layered material made to slow or stop a running chain, and Husqvarna describes a pull-apart design made to clog the sprocket system. Chaps are made to reduce the risk or the severity of an injury, not to make contact with a running chain safe.
How should chainsaw chaps fit?
Use the maker’s own measure for the pair you pick, with the waist adjusted snug. The FORESTER and Husqvarna state overall length from waist to ankle, the ZELARMAN states 42 in from waist to instep, and the YARDMARIS states size ranges. The FORESTER and ZELARMAN each shorten by up to 2 in.
What is the difference between apron style and wrap style?
An apron style shields the front of the legs; the FORESTER apron is open at the back, and the Husqvarna is an apron wrap. The YARDMARIS is a technical wrap style, which closes around the leg.




