What Is the Best Chainsaw Chain: How to Choose One
Match pitch, gauge and drive links to your bar, then compare four replacement chains for fit, kickback features and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Husqvarna X-Cut SP33G 18 in .325 Pitch Chainsaw Chain9.7/10View on Amazon - 2
FUNKYWOO 18 in Chainsaw Chain 4-Pack9.6/10View on Amazon - 3
Fifchall 14 in Chainsaw Chain 2-Pack9.6/10View on Amazon - 4
Fifchall 12 in Chainsaw Chain 4-Pack9.6/10View on Amazon
A dull chain turns a quick limb job into a long afternoon on the property. The best chainsaw chain is the one that matches the bar it runs on, with the right pitch, gauge and drive link count, and low-kickback features that suit the work. This guide shows how to read those marks and compares replacement chains that fit common saws.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Husqvarna X-Cut SP33G 18 in .325 Pitch Chainsaw Chain
18 in Husqvarna chain with .325 pitch, .050 gauge and 72 drive links, made for the listed Husqvarna saws.
Who it's for: owners of the listed Husqvarna saws who want a pre-stretched, semi-chisel chain with a stated warranty.
Who should skip it: anyone whose saw runs 3/8 LP pitch, or anyone who wants a multi-pack with spares.
The X-Cut SP33G is the only chain here with a .325 pitch, made for the listed Husqvarna saws, including the 435, 440, 445, 450R, 543XP, 545 and 550 XP. The listing describes a semi-chisel chain, easy to file and stays sharper longer, with 72 drive links, a .325 pitch and a .050 gauge. It is pre-stretched and weighs 0.34 lb, and the listing states a 90-day warranty.
Pros
- Pre-stretched chain, per the listing
- Semi-chisel chain that stays sharper longer and is easy to file, per the listing
- Fits the listed Husqvarna models, including the 435, 440 and 550 XP
- 90-day warranty stated on the listing
Cons
- Single chain in the box, so no spare on hand
- Fits only the listed Husqvarna models, so check your model before ordering
- The .325 pitch suits fewer saws than the 3/8 LP chains in this guide
- Only the 18 in size is offered here, so it does not suit smaller bars

FUNKYWOO 18 in Chainsaw Chain 4-Pack
Four-pack of 18 in chains with 3/8 LP pitch, .050 gauge and 62 drive links for a long list of saws.
Who it's for: owners of 18 in saws who want spares on hand and a low-kickback chain.
Who should skip it: anyone with a 12 in or 14 in bar, or anyone who wants a stated warranty term.
This four-pack covers 18 in bars that run 3/8 LP pitch, .050 gauge and 62 drive links. The listing describes a heat-treated, semi-chisel chain with a hard chrome outer layer and hardened rivets, low-kickback and low-vibration. It fits Craftsman, Echo, Homelite, Husqvarna, Kobalt, McCulloch, Poulan and Remington saws.
Pros
- Four chains in the pack, so spares are on hand
- Semi-chisel chain with a hard chrome outer layer, per the listing
- Low-kickback, low-vibration chain, per the listing
- Hardened rivets for a stronger connection between links, per the listing
Cons
- Warranty term is not stated on the listing
- Only the 18 in size is offered here, so it does not suit smaller bars
- No weight is stated on the listing
- Four-pack means buying four at once even if only one is needed

Fifchall 14 in Chainsaw Chain 2-Pack
Two-pack of 14 in chains with 3/8 LP pitch, .050 gauge and 52 drive links for pole saws and smaller saws.
Who it's for: owners of 14 in pole saws and the listed Craftsman, Echo, Greenworks, Poulan, Ryobi, Sun Joe and Makita models.
Who should skip it: anyone who needs a longer bar chain or a stated warranty term.
This two-pack fits 14 in saws that run 3/8 LP pitch, .050 gauge and 52 drive links. The listing says the chain met the kickback performance requirement of ANSI Standards and describes a deeply quenched chain with heat-treated rivets. The maker lists the chain as 14 inches and also gives a chain length of 18.9 inches; check the fit before ordering.
Pros
- Meets the kickback performance requirement of ANSI Standards, per the listing
- Deeply quenched chain that cuts smoothly, per the listing
- Heat-treated rivets for a stronger connection, per the listing
- Fits a long list of Craftsman, Echo, Poulan, Ryobi and other saws, per the listing
Cons
- Two chains in the box, so fewer spares than the four-packs here
- The 14 in size does not suit saws that need a longer bar chain
- No weight is stated on the listing
- Only fits saws that run 3/8 LP pitch and .050 gauge, so check your bar first

Fifchall 12 in Chainsaw Chain 4-Pack
Four-pack of 12 in chains with 3/8 LP pitch, .050 gauge and 45 drive links for pole saws.
Who it's for: owners of 12 in pole saws who want spares on hand and a low-kickback chain.
Who should skip it: anyone with a larger bar, or anyone who wants a stated warranty term.
This four-pack fits 12 in pole saws that run 3/8 LP pitch, .050 gauge and 45 drive links. The listing says the chain met the kickback performance requirement of ANSI Standards and describes a deeply quenched chain that cuts smoothly with minimum kickback. The fit list covers Craftsman, Echo, Greenworks 40 Volt, Poulan, Remington, Ryobi and more.
Pros
- Meets the kickback performance requirement of ANSI Standards, per the listing
- Four chains in the pack, so spares are on hand
- Deeply quenched chain that cuts smoothly, per the listing
- Fits Craftsman, Echo, Greenworks, Poulan, Remington, Ryobi and more, per the listing
Cons
- Warranty term is not stated on the listing
- The 12 in size suits pole saws and smaller saws only
- No weight is stated on the listing
- A 12 in chain is short for cutting larger limbs
What is the best chainsaw chain for your saw
Start with the bar, not the brand. The chain must match the pitch, gauge and drive link count the bar calls for. A chain with the wrong pitch will not seat on the sprocket, and the wrong gauge will not sit in the bar groove. Check the fit list against your saw model before ordering. The chainsaw chain types chart shows how pitch and gauge differ across common chains.
Step 1: read the pitch, gauge and drive links
Find the marks on the bar or in the saw manual. Pitch sets the spacing between drive links, gauge sets the thickness that rides in the bar groove, and the drive link count sets the loop length. The four chains in this guide cover 12 in, 14 in and 18 in bars, with 3/8 LP pitch on the FUNKYWOO and Fifchall chains and .325 pitch on the Husqvarna chain.
Step 2: pick the chain features that suit the work
Semi-chisel chain is easy to file and stays sharper longer, per the Husqvarna listing, and the FUNKYWOO listing describes a heat-treated semi-chisel chain. Low-kickback features matter on every saw, and the Fifchall listings state that the chain met the kickback performance requirement of ANSI Standards. The Husqvarna chain is pre-stretched, per the listing. A multi-pack keeps a spare on the shelf, and the chainsaw bar maintenance guide covers cleaning and oiling the bar.
Replacement chainsaw chains for the property
Match the pitch, gauge and drive links to your bar before choosing from the chains below.
Safety
Wear eye and hearing protection and sturdy shoes, clear debris before cutting, and keep children, pets and bystanders away from the work area. Check chain tension and bar oil before starting, and follow the saw manual for fitting a new chain.
FAQ: mowing large lots
Who makes the best chainsaw chain?
No single maker leads every saw. Husqvarna makes the SP33G for its own listed saws, while FUNKYWOO and Fifchall list wide fit across Craftsman, Echo and Poulan. Match the pitch, gauge and drive links first, then compare the makers that fit.
How do I know which chainsaw chain fits my saw?
Read the pitch, gauge and drive link count from the bar or the saw manual, then check them against the chain listing and the fit list. If the listing names your saw model, the match is stated.
What do pitch, gauge and drive links mean?
Pitch is the spacing between drive links, gauge is the thickness that rides in the bar groove, and drive links set the loop length. Each one must match the bar.
Can I use a 14 in chain on a 12 in bar?
No. The drive link count and loop length are set for the bar size. Buy the chain that matches your bar size.
What is a low-kickback chainsaw chain?
The listings here state low-kickback features or meeting the kickback performance requirement of ANSI Standards. Follow the saw manual and wear eye and hearing protection when cutting.




