Chainsaw Chain Types Chart
A chainsaw chain types chart that reads pitch, gauge and drive links off the bar stamp and the old chain, so the replacement fits.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
KAKEI R40 10 in 3/8 LP Semi-Chisel Chain 3-Pack9.6/10View on Amazon - 2
ANCKNE 14 in 3/8 LP Semi-Chisel Chain 5-Pack9.6/10View on Amazon - 3
FUNKYWOO 16 in 3/8 LP Semi-Chisel Chain 4-Pack9.6/10View on Amazon - 4
Oregon S52 14 in 3/8 LP Low-Kickback Chain 3-Pack9.6/10View on Amazon
On a wooded lot, a dull or wrong chain turns a quick cut into a long chore, and the fix starts with the numbers stamped on the bar. Chainsaw chain types chart is the short way to read those numbers: pitch, gauge and drive links, matched to the bar length, with the cutter style read off the old chain. Match pitch, gauge and drive links to the bar stamp and the old chain, and the replacement fits.
This guide reads the chart row by row, then shows the chains that match it. The chains here cover bars of 10, 14 and 16 in, all with 3/8 in LP pitch, gauges of .043 in and .050 in, and drive link counts of 40, 52 and 56. The gear section at the end ties each chain to the bar it fits.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

KAKEI R40 10 in 3/8 LP Semi-Chisel Chain 3-Pack
A 10 in semi-chisel chain with 3/8 in LP pitch, .043 in gauge and 40 drive links, in a pack of three.
Who it's for: owners of a 10 in bar saw who want a low-kickback chain with a spare or two on hand.
Who should skip it: anyone with a longer bar, or anyone whose bar stamp shows a different pitch, gauge or drive link count.
The KAKEI R40 is the 10 in chain in this group: 3/8 in LP pitch, .043 in gauge, 40 drive links, semi-chisel, in a pack of three. The maker lists German steel with hardened rivets and chrome-plated cutters, and states that the chain meets the kickback performance requirements of ANSI B175.1-2012 and CSA Standard Z62.3. It fits the Ryobi P546, Worx WG322, LCS1020 and CMCCS610D1 by name.
Pros
- 10 in bar with 3/8 in LP pitch, .043 in gauge and 40 drive links
- Semi-chisel cutters, chrome plated, with hardened rivets
- Meets ANSI B175.1-2012 and CSA Z62.3 kickback requirements, per the maker
- Three chains in the pack, so a spare is on hand
Cons
- 10 in bar only; it does not fit longer bars
- Sold as a 3-pack, so you buy three chains at once
- Fits the named Ryobi, Worx and Craftsman models; other saws need a bar stamp check
- No warranty term is stated

ANCKNE 14 in 3/8 LP Semi-Chisel Chain 5-Pack
A 14 in semi-chisel chain with 3/8 in LP pitch, .050 in gauge and 52 drive links, in a pack of five.
Who it's for: owners of a 14 in bar saw who want several spares in one pack.
Who should skip it: anyone with a different bar length, or anyone whose bar stamp shows a different pitch, gauge or drive link count.
The ANCKNE chain is the 14 in chain in this group: 3/8 in LP pitch, .050 in gauge, 52 drive links, semi-chisel, in a pack of five. The maker lists a heat-treated chain with a chrome outer layer and hardened rivets, and describes smooth cutting with a higher tolerance for debris. It fits the Husqvarna 120, Echo CS-310, Ryobi RY3714, Poulan and Homelite models by name, among others.
Pros
- 14 in bar with 3/8 in LP pitch, .050 in gauge and 52 drive links
- Semi-chisel chain, heat treated and quenched, with a chrome outer layer
- Five chains in the pack, the largest pack here
- Fits Husqvarna, Echo, Ryobi, Poulan and Homelite models by name
Cons
- 14 in bar only; it does not fit longer bars
- No warranty term is stated
- Five-pack only; you buy five chains at once
- .050 in gauge suits bars cut for that gauge only

FUNKYWOO 16 in 3/8 LP Semi-Chisel Chain 4-Pack
A 16 in semi-chisel chain with 3/8 in LP pitch, .043 in gauge and 56 drive links, in a pack of four.
Who it's for: owners of a 16 in bar saw who want a low-kickback chain for longer bars.
Who should skip it: anyone with a shorter bar, or anyone whose bar stamp shows a different pitch, gauge or drive link count.
The FUNKYWOO chain is the 16 in chain in this group: 3/8 in LP pitch, .043 in gauge, 56 drive links, semi-chisel, in a pack of four. The maker lists a hard chrome outer layer with hardened rivets, and describes a low-kickback, low-vibration chain. It fits Milwaukee, EGO, DeWalt, Greenworks, Makita, Poulan and Craftsman models by name.
Pros
- 16 in bar with 3/8 in LP pitch, .043 in gauge and 56 drive links
- Low-kickback, low-vibration chain, per the maker
- Hard chrome outer layer with hardened rivets
- Four chains in the pack
Cons
- 16 in bar only; it does not fit shorter bars
- Four-pack only; you buy four chains at once
- .043 in gauge suits bars cut for that gauge only
- Fits named Milwaukee, EGO, DeWalt and Greenworks models; other saws need a bar stamp check

Oregon S52 14 in 3/8 LP Low-Kickback Chain 3-Pack
A 14 in low-kickback chain with 3/8 in LP pitch, .050 in gauge and 52 drive links, in a pack of three.
Who it's for: owners of a 14 in bar saw up to 42cc who want a low-kickback chain.
Who should skip it: anyone with a larger saw, or anyone whose bar stamp shows a different pitch, gauge or drive link count.
The Oregon S52 is the second 14 in chain in this group: 3/8 in LP pitch, .050 in gauge, 52 drive links, in a pack of three. The maker lists a low-kickback bumper drive link paired with a depth gauge design, and states that it fits chainsaws up to 42cc. It fits Earthwise, Echo, Greenworks, Homelite and Ryobi models by name.
Pros
- 14 in bar with 3/8 in LP pitch, .050 in gauge and 52 drive links
- Low-kickback bumper drive link with depth gauge design
- Fits chainsaws up to 42cc, per the maker
- Three chains in the pack
Cons
- 14 in bar only; it does not fit longer bars
- Fits chainsaws up to 42cc only, per the maker
- Three-pack only; you buy three chains at once
- .050 in gauge suits bars cut for that gauge only
Chainsaw chain types chart: pitch, gauge and drive links
| Bar | Pitch | Gauge | Drive links | Cutter | Chain |
|---|---|---|---|---|---|
| 10 in | 3/8 in LP | .043 in | 40 | Semi-chisel | KAKEI R40 10 in Chain |
| 14 in | 3/8 in LP | .050 in | 52 | Semi-chisel | ANCKNE 14 in Chain |
| 14 in | 3/8 in LP | .050 in | 52 | Not stated | Oregon 14 in Chain |
| 16 in | 3/8 in LP | .043 in | 56 | Semi-chisel | FUNKYWOO 16 in Chain |
Read the chart across one row: bar length, pitch, gauge, drive links and cutter style together describe one chain. Change pitch, gauge or drive links and the chain no longer matches the bar. The bar stamp and the manual give the figures for the saw; the chart shows what each figure means.
Read the bar stamp first
The KAKEI listing puts it plainly: check the owner’s manual or the guide bar side stamp to find the pitch, gauge, length and drive link number, and select the chain by those parameters. That stamp is the source of truth for the saw, and every chain in this guide states the same figures. If the stamp is worn, check the manual or the old chain. A chain that matches the stamp except for pitch, gauge or drive links will not fit. The how to measure chainsaw chain size guide walks through the same figures.
Pitch
Pitch is the chain size class, and every chain in this guide states 3/8 in LP pitch. LP stands for low profile, and the pitch must match the sprocket and the bar. The KAKEI, ANCKNE, FUNKYWOO and Oregon chains (on Amazon) all state 3/8 in LP, so pitch does not separate them; it is the figure to confirm when the bar stamp shows a different size class. See the chainsaw chain sizes guide for the other common sizes.
Gauge
Gauge is the thickness of the drive link that rides in the bar slot, and it must match the slot. The chains here state .043 in and .050 in gauges. The FUNKYWOO listing gives .043 in as 1.1 mm, and the Oregon listing gives .050 in as 1.3 mm. A .043 in chain will not sit right in a .050 in slot, and a .050 in chain will not fit a .043 in slot, so read the gauge off the bar stamp.
Drive links
Drive links are the links that sit in the bar groove and set the chain length for the bar. The chains here state 40 drive links for the 10 in bar, 52 for the 14 in bars and 56 for the 16 in bar. Count the links on the old chain if the stamp is worn, and match the count exactly: a chain with the wrong count will not fit the bar.
Cutter style and kickback design
The KAKEI, ANCKNE and FUNKYWOO chains state semi-chisel cutters. The ANCKNE and FUNKYWOO chains are described as smooth cutting with a higher tolerance for debris. Low kickback is a separate safety design, not a cutter style: the Oregon chain states a low-kickback bumper drive link with a depth gauge design, and the FUNKYWOO chain is described as low-kickback and low-vibration. The KAKEI chain (on Amazon) is both semi-chisel and low-kickback, and states that it meets the kickback performance requirements of ANSI B175.1-2012 and CSA Standard Z62.3.
Gear for the job
With the chart read, the gear below covers the bars in it: a 10 in chain, 14 in chains and a 16 in chain, each matched to its bar by pitch, gauge and drive links.
Safety
Wear eye and hearing protection and sturdy shoes. Clear sticks, stones and other debris before you cut, and keep children, pets and bystanders away from the work area. Check the chain fit against the bar stamp and the manual before you start, and follow the manual for tension and fitting. See the chainsaw safety gear guide for the rest of the kit.
FAQ: mowing large lots
How do I know which chain fits my chainsaw?
Check the owner’s manual or the guide bar side stamp for the pitch, gauge, length and drive link number, and select the chain by those parameters. The chart above shows what each figure means. If the stamp is worn, check the manual.
What does 3/8 inch LP pitch mean?
Pitch is the chain size class, and LP stands for low profile. Every chain in this guide states 3/8 in LP pitch, which must match the sprocket and the bar. If the bar stamp shows a different pitch, that chain will not fit the saw.
What gauge chain do I need?
The gauge must match the guide bar slot. The chains here state .043 in and .050 in gauges: the FUNKYWOO listing gives .043 in as 1.1 mm, and the Oregon listing gives .050 in as 1.3 mm.
How many drive links do I need?
The count must match the bar. The chains here state 40 drive links for the 10 in bar, 52 for the 14 in bars and 56 for the 16 in bar. A chain with the wrong count will not fit the bar, so match the count exactly.
What is a semi-chisel chain?
Semi-chisel is a cutter style stated on the KAKEI, ANCKNE and FUNKYWOO chains here. The ANCKNE and FUNKYWOO chains are described as smooth cutting with a higher tolerance for debris.
What does low kickback mean?
Low kickback is a chain design built to reduce kickback. The KAKEI chain states that it meets the kickback performance requirements of ANSI B175.1-2012 and CSA Standard Z62.3, and the Oregon chain uses a bumper drive link paired with a depth gauge design. The FUNKYWOO chain is described as low-kickback and low-vibration.




