Are Shear Pins Universal? Compatibility Guide
Shear pins are not universal: match the part number and stated pin size in your machine manual to the brands the maker names.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Huthbrother 738-04124A Shear Pins and Cotter Pins Kit, 20 Pack9.5/10View on Amazon - 2
YUNVI Shear Pins and Cotter Pins Kit, 10 Sets9.3/10View on Amazon
A shear pin that snaps when the auger strikes something solid stops the auger cold, and the wrong replacement can leave the machine sitting while the driveway stays buried. So, are shear pins universal? No. A shear pin is made for a particular machine, and the kits below fit only the brands and part numbers the maker names. Match the part number and the pin size to your machine manual before you order, and keep spares on hand for the next hard pass.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Huthbrother 738-04124A Shear Pins and Cotter Pins Kit, 20 Pack
20 shear pins and 20 cotter pins for MTD-family snowblowers, with a stated pin size and named Cub Cadet models.
Who it's for: owners whose manual names 738-04124A, 738-04124, 714-04040 or the other stated part numbers, and who want the stated pin size in writing before ordering.
Who should skip it: owners whose part number or pin size is not named here.
The Huthbrother kit handles the replacement step for MTD, Craftsman, Cub Cadet and Troy Bilt snowblowers that use the named part numbers. The maker states a pin size of 0.25 inch by 1.5 inch and names Cub Cadet models including 2X 930SWE, 828WE and SB45, plus 300/500/600 Series two-stage models and three-stage models from 2005 and after. The pack holds 20 shear pins and 20 cotter pins, and the maker states a rust-proof and corrosion-resistant finish.
Pros
- 20 shear pins and 20 cotter pins in the pack
- Pin size stated as 0.25 inch by 1.5 inch
- Five replaced part numbers named by the maker, plus 738-05273 as a compatible number
- Cub Cadet models named, plus 300/500/600 Series fit
Cons
- Fits only the named brands, models and part numbers
- One stated pin size, so other sizes need another kit
- Maker advises a manual check before ordering
- No warranty term is stated

YUNVI Shear Pins and Cotter Pins Kit, 10 Sets
10 shear pins and 10 cotter pins for MTD-family snowblowers, matched by part number 738-04124 and 714-04040.
Who it's for: owners whose manual names 738-04124 or 714-04040 and who want a smaller pack of spares.
Who should skip it: owners who need a stated pin diameter and length before ordering, since the maker does not state a pin size.
The YUNVI kit handles the same replacement step for MTD, Craftsman, Cub Cadet and Troy Bilt snowblowers, matched by part number rather than by a stated pin size. The maker states compatibility with 738-04124 and 714-04040, gives the material as metal with a rust-proof and corrosion-resistant finish, and states the install steps: push the shear pin in and lock it with the cotter pin. The maker also states that these are not original brand products and that brand names show compatibility only.
Pros
- 10 shear pins and 10 cotter pins in the pack
- Compatible part numbers named: 738-04124 and 714-04040
- Metal pins stated as rust-proof and corrosion-resistant
- Install steps stated: push in, lock with cotter pin
Cons
- Pin diameter and length are not stated
- Smaller pack than the 20-pack kit here
- Only two compatible part numbers are named
- No snowblower models are named by the maker
Are shear pins universal? Start with the part number
No. A shear pin is made to break at a set load so the auger and gearbox survive a strike, and that load, the pin diameter and the pin length differ by machine. A pin that fits the hole can still be wrong for the machine if the maker does not name your brand, model or part number. That is why the kits here name the brands and part numbers they replace instead of claiming a universal fit.
Work in this order. Read the part number in your machine manual. Compare it with the part numbers the maker names for the kit. Where the maker states a pin size, compare that size with the manual as well. If your part number is not named, do not assume the pin fits. For background on what the pin does, see what is a shear pin, and for size charts by brand, see the Ariens shear pin size chart.
How to check fit before you order
- Part number first: the Huthbrother kit (on Amazon) replaces 738-04124A, 714-04040, 738-04124, YS-714-04040 and 02-901, and its name also covers 738-05273. The YUNVI kit (on Amazon) is compatible with 738-04124 and 714-04040.
- Brand and model next: both kits name MTD, Craftsman, Cub Cadet and Troy Bilt snowblowers. The Huthbrother maker also names Cub Cadet models 2X 930SWE, 2X 933SWE, 2X 945SWE, 828WE, 928SWE, 930SWE, 933SWE, 945SWE, SW10528L and SB45, plus 300/500/600 Series two-stage models and three-stage models from 2005 and after.
- Size where stated: the Huthbrother maker states a pin size of 0.25 inch by 1.5 inch, also written as 1/4 inch diameter by 1.5 inch long. The YUNVI maker does not state a pin diameter or length, so the part number carries the fit decision there.
- Manual last: the Huthbrother maker advises consulting your machine manual before ordering to make sure the replacement parts are correct. Do that even when the part number matches.
Shear pin kits that state their fit
Once the part number in your manual matches, the kits below handle the replacement step: each kit pairs shear pins with the cotter pins that lock them in place.
Why a universal claim should slow you down
A shear pin protects the machine by failing first. If a pin is too strong for the machine, the auger or gearbox can take the hit instead. If a pin is too weak, it can break in normal snow and stop work. The maker of each kit here avoids a universal claim and names compatible brands and part numbers, and the YUNVI maker states plainly that its pins are not original MTD, Craftsman, Cub Cadet or Troy Bilt brand products, with brand names used only to show compatibility. Treat any kit that names no part number and no size as a poor match for a machine you depend on in winter.
Pack size matters for the season, not for fit. The YUNVI kit includes 10 shear pins and 10 cotter pins. The Huthbrother kit includes 20 shear pins and 20 cotter pins. A larger pack leaves more spares in the drawer, but it does not widen the fit. For a wider set of snow blower pins, see best shear pins for snow blower.
Safety
Shut the engine off and let moving parts stop before you reach near the auger. Follow your machine manual for the pin change, and keep hands clear of the auger housing while you work. Keep children and pets away from the work area. See our Safety Disclaimer.
FAQ: mowing large lots
Are shear pins universal across snowblower brands?
No. The kits here fit only the brands and part numbers the maker names: MTD, Craftsman, Cub Cadet and Troy Bilt machines with the stated part numbers. Match the part number in your manual before you order.
Which part numbers do these kits replace?
The Huthbrother kit replaces 738-04124A, 714-04040, 738-04124, YS-714-04040 and 02-901, and also covers 738-05273. The YUNVI kit is compatible with 738-04124 and 714-04040.
What pin size is stated?
The Huthbrother maker states 0.25 inch by 1.5 inch, also written as 1/4 inch diameter by 1.5 inch long. The YUNVI maker does not state a pin diameter or length.
How many pins come in each kit?
The YUNVI kit includes 10 shear pins and 10 cotter pins. The Huthbrother kit includes 20 shear pins and 20 cotter pins.
How is the pin installed?
The YUNVI maker states the steps in plain terms: push the shear pin in, use the cotter pin to lock it in place, and check that it is ready to use. Follow your machine manual for your model.




