Brush Hog Parts: Blades, Belts and Shear Pins
Brush hog parts explained: blades, belts and shear pins, how to match a replacement to your cutter, and four blade sets compared by size, steel and fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Rancher Supply Replacement Land Pride Rotary Cutter Blades 820-198C9.5/10View on Amazon - 2
MOTOQUEEN Brush Cutter Blades for Wolverine BC-13-72W9.4/10View on Amazon - 3
WIKIBB Mower King Brush Cutter Blades, 2 Pack, AR4009.4/10View on Amazon - 4
HEIWUKONG 7mm Brush Hog Blades, Set of 29.3/10View on Amazon
Brush hog parts are the wear parts that keep a rotary cutter cutting: blades, belts and shear pins, plus the bolts and hardware that hold them. When the cutter stops cutting cleanly or starts shaking, one of those parts is usually worn, loose or broken. This guide explains brush hog parts, what wears first and how to match a replacement.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Rancher Supply Replacement Land Pride Rotary Cutter Blades 820-198C
A 2-blade set of rotary cutter blades in high-quality steel, 3 in by 25 in by 1/2 in with a 1-1/2 in bolt hole, made to replace Land Pride 820-198C.
Who it's for: Land Pride owners who want an exact part-number match with no measuring.
Who should skip it: anyone whose cutter is not on the fit list, or who wants a stated warranty.
The Rancher Supply set is the clearest fit in this group: rotary cutter blades made to replace Land Pride 820-198C, sized at 3 in by 25 in by 1/2 in with a 1-1/2 in bolt hole, and listed to fit the RCF 2060, RCR1560, RCR1260, RCR1860 and RCR2512CTR. The listing calls the steel high-quality and states the set is made in the USA.
The listing states no warranty term, no blade weight and no steel grade, so those facts stay unknown before buying. The fit is narrow by design: only the Land Pride models listed.
Pros
- Exact replacement for Land Pride 820-198C, with 5 cutter models listed
- 25 in length with a 1-1/2 in bolt hole, stated plainly
- High-quality steel, per the listing
- Made in the USA, per the listing
Cons
- No warranty term stated on the listing
- No stated blade weight
- Fits only the Land Pride models listed
- No stated steel grade

MOTOQUEEN Brush Cutter Blades for Wolverine BC-13-72W
A 2-pack of 10 mm spring steel replacement blades for the Wolverine BC-13-72W skid steer brush hog, with a protective coating against rust.
Who it's for: Wolverine BC-13-72W owners cutting heavy brush, weeds and small saplings on rough ground.
Who should skip it: anyone whose cutter is not the BC-13-72W, or who wants a stated warranty.
The MOTOQUEEN blades are the thickest of the skid steer sets here: 10 mm spring steel, made to absorb heavy impact without cracking or bending like standard steel blades, per the listing. They are built for the Wolverine BC-13-72W skid steer brush hog, with a total length of 370 mm (14.56 in), a width of 70 mm (2.75 in) and a hole inner diameter of 25.5 mm (1 in). A protective coating keeps rust off during storage and shipping, and the 2-pack covers both blades.
The listing contradicts itself on size: the spec table gives product dimensions of 14.96 in by 3.14 in by 2.36 in, which do not match the bullets. Trust the bullets. The listing states no warranty term and no blade weight.
Pros
- 10 mm spring steel absorbs heavy impact without cracking or bending, per the listing
- Exact fit for the Wolverine BC-13-72W
- Protective coating prevents rust in storage and shipping
- 2-pack covers both blades in one buy
Cons
- No warranty term stated on the listing
- Fits only the Wolverine BC-13-72W
- No stated blade weight

WIKIBB Mower King Brush Cutter Blades, 2 Pack, AR400
A 2-pack of AR400 steel brush cutter blades, 2.36 in wide, 13.97 in long and 0.27 in thick, for Mower King and compatible brush cutters.
Who it's for: Mower King and compatible skid steer owners who want AR400 blades with a plainly stated size.
Who should skip it: anyone who needs a stated bolt hole size, or a stated warranty before buying.
The WIKIBB blades are AR400 steel brush cutter blades for Mower King and compatible brush cutters, sized at 2.36 in wide, 13.97 in long and 0.27 in thick, with the thickness also given as 7 mm. The listing says the AR400 steel brings high hardness, wear resistance and good compressive and tensile strength, and the blades install directly with no complicated modification.
The listing states no warranty term, no bolt hole size and no blade weight. The fit list is broad, covering ASV, Bobcat, Case, CAT, John Deere, Kubota, Mower King and Caterpillar, so confirm your cutter model before ordering.
Pros
- AR400 steel with high hardness and wear resistance, per the listing
- Exact size stated: 2.36 in wide, 13.97 in long, 0.27 in thick
- Fits a wide list of skid steer brands, including Mower King
- Installs directly with no modification, per the listing
Cons
- No warranty term stated on the listing
- No stated bolt hole size
- No stated blade weight
- No spare blade beyond the 2-pack

HEIWUKONG 7mm Brush Hog Blades, Set of 2
A set of 2 AR400 brush hog blades, 2-3/8 in wide and 14 in long with a 30 mm mounting hole, for Mower King skid steers and compatible cutters.
Who it's for: Mower King skid steer owners who want AR400 blades and can live with a messy listing.
Who should skip it: anyone who wants clean, consistent specs before buying.
The HEIWUKONG blades are a set of 2 AR400 brush hog blades for Mower King skid steers and compatible cutters, 2-3/8 in wide and 14 in long with a 30 mm mounting hole. The listing says the 7 mm AR400 steel resists wear and bending and stays sharp after long-term use, and the blades install in a few minutes by placing the mower on its side, cleaning the blade shaft and fitting the new blades in the original order.
The listing contradicts itself twice. It gives the thickness as both 7 mm and 1/4 in, which do not match, and its spec table lists the number of items as 1 while the title says a set of 2. Trust the title and bullets: 7 mm thick, a set of 2. The listing states no warranty term and no blade weight.
Pros
- AR400 steel, 7 mm thick, for wear resistance
- 30 mm mounting hole stated plainly
- Installs in a few minutes with no complicated steps, per the listing
- Fits Mower King and other skid steer brands
Cons
- Listing gives thickness as both 7 mm and 1/4 in, which do not match
- No warranty term stated on the listing
- No stated blade weight
Other machines to compare
Lisle 14000 Parts Cleaning BrushCheck price on Amazon
Agri-Fab Part 46780 21-3/4-Inch BrushCheck price on Amazon
Parts Brush™ AtlastaCheck price on Amazon
Lisle 89500 Atlasta Parts BrushCheck price on Amazon
Brush hog parts: what wears out first
Blades wear first because they do the cutting, striking brush, saplings and the odd stone on every pass. On cutters with a belt drive, belts are another wear item, slipping or cracking with age and heat, and shear pins break by design to protect the gearbox when a blade jams.
| Blade set | Length | Thickness | Fits |
|---|---|---|---|
| Rancher Supply 820-198C | 25 in | 1/2 in | Land Pride RCF 2060, RCR1560, RCR1260, RCR1860, RCR2512CTR |
| MOTOQUEEN 10mm Blades | 14.56 in | 10 mm | Wolverine BC-13-72W |
| WIKIBB AR400 Blades | 13.97 in | 0.27 in | Mower King and compatible brush cutters |
| HEIWUKONG 7mm Blades | 14 in | 7 mm | Mower King skid steer and compatible cutters |
Length, thickness and the mounting hole decide whether a blade fits. The Rancher Supply set is the longest here at 25 in, while the skid steer blades run from 13.97 in to 14.56 in. Match all three figures to the blade that came off your cutter.
Match the blade to your cutter
Start with the part number. The Rancher Supply blades (on Amazon) replace Land Pride 820-198C and list 5 cutter models by name. For skid steer blades, the fit list names brands such as Mower King, ASV, Bobcat, Case, CAT, John Deere and Kubota, so confirm your cutter model against that list.
Then measure the old blade: length, width, thickness and the mounting hole. The WIKIBB blades (on Amazon) measure 2.36 in wide, 13.97 in long and 0.27 in thick, the HEIWUKONG blades (on Amazon) are 2-3/8 in wide and 14 in long with a 30 mm mounting hole, and the MOTOQUEEN blades (on Amazon) are 370 mm long, 70 mm wide and 10 mm thick with a 25.5 mm hole. If any figure differs from your old blade, confirm the new blade is listed for your cutter model before ordering.
Watch for listings that disagree with themselves. The HEIWUKONG listing gives its thickness as both 7 mm and 1/4 in, and its spec table lists the set as 1 item while the title says a set of 2. The MOTOQUEEN spec table also gives different dimensions from its bullets. Trust the title and bullets in both cases.
See our best brush hog blades roundup for more replacement blade picks, and our OEM vs aftermarket mower blades guide for the tradeoffs between factory and aftermarket parts.
Belts and shear pins: what to check
On cutters with a belt drive, the belt carries power to the cutter, and it shows wear as cracks, glazing or slack. A belt that slips under load will not hold speed in heavy brush, and a cracked belt can snap mid-job, so look it over each time the blades come off.
Shear pins sit between the driveline and the gearbox, and they break on purpose when a blade hits something solid, saving the gearbox from the shock. When a pin breaks, replace it with the pin your manual calls for. Never fit a harder pin to stop breakage, since the pin is the part meant to give way.
For the gearbox itself, see our best gear oil for brush hog picks, and for the wider choice between cutter types, see mid mount mower vs brush hog and brush mower vs lawn mower.
Replacement blades for your brush hog
Blades are the part you will replace most often, so the four sets below are ranked by fit, steel and stated size.
FAQ: mowing large lots
How do I know which brush hog blade fits my cutter?
Match the part number first, then measure the old blade: length, width, thickness and mounting hole. The Rancher Supply set replaces Land Pride 820-198C for 5 named models. If any figure differs from your old blade, confirm the new blade is listed for your cutter model before ordering.
What thickness brush hog blade should I buy?
Buy the thickness your cutter came with. The blades here run from 0.27 in and 7 mm on the AR400 sets to 10 mm spring steel and 1/2 in on the other sets. A thicker blade is only better when it matches your cutter.
Are AR400 blades better than spring steel blades?
They suit different jobs. AR400 steel is listed for high hardness and wear resistance. Spring steel is listed to absorb heavy impact without cracking or bending. Pick by the ground you cut.
How often should I replace brush hog blades?
Replace them when the edge is dull, chipped or bent, or when the cut turns ragged. Check the blades each time the cutter comes off the tractor.
Can I use a blade made for another brand?
Only when the size, thickness and mounting hole match and your cutter is on the fit list. The WIKIBB and HEIWUKONG blades list many skid steer brands, including Mower King, ASV and Bobcat. A blade that fits the hole but not the length will cut badly or strike the deck.
More mowing guides
- Best Brush Hog Blades (2026): 5 Replacement Picks
- Best Gear Oil for Brush Hog (2026): 5 Compared
- Mid Mount Mower vs Brush Hog: Which One Should You Buy?
- Brush Mower vs Lawn Mower: Which One Should You Buy?
See our best brush hog blades roundup and our best gear oil for brush hog picks for the gearbox.




