How Much Is a Brush Hog: Cost Guide
A plain guide to what sets brush hog costs, how to match a cutter to a tractor and land, and what upkeep to plan for.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YDDVEHI Heavy Duty Brush Hog Cutter Blades9.4/10View on Amazon - 2
HEIWUKONG 7mm Brush Hog Blades9.3/10View on Amazon - 3
Yoursme 7556 Bush Hog Blades9.6/10View on Amazon
Thick brush, tall grass and saplings take over open ground fast, and a standard lawn mower cannot cut through woody stems. A brush hog, also called a rotary cutter, is built for that rough work, and the question most owners ask before buying is how much is a brush hog. This guide explains what sets the cost, how to match a cutter to a tractor and a property, and what upkeep to plan for.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
How Much Is a Brush Hog: What Sets the Cost
The cost of a brush hog varies with size, power source and build. Wider decks clear more ground in each pass, and wider decks need more tractor power behind them. The listings used for this guide show the spread: MechMaxx lists a 48-inch flail mower and a 60-inch flail mower for tractors from 15 to 35 horsepower, while the Earthquake Acreage tow-behind mower (on Amazon) matches a 44-inch deck with a 17.5-horsepower engine of its own. A heavier build also costs more to make and to move: the Earthquake Acreage weighs 631.0 pounds, and the MechMaxx 60-inch flail mower weighs 673.0 pounds.
Drive type moves the cost as well. A PTO cutter draws power from the tractor through a 540 RPM shaft, so the tractor carries the engine cost. A tow-behind mower brings its own engine, and a remote control mower adds tracks, a remote and a separate drive motor. The Tyzar remote flail mower (on Amazon), for example, combines a 459cc engine with crawler tracks and a remote range of 2000 feet, while the AIWEIYA remote mower (on Amazon) combines a 9-horsepower engine with a 55cm deck and a 1600W brushless drive motor. Extra capability adds cost, and it also adds weight to haul and store.
Match the Cutter to Your Tractor
Start with the tractor, not the cutter. A PTO mower needs a matching hitch and shaft speed: the MechMaxx flail mowers fit a category 1, 3-point hitch and a 540 RPM PTO shaft, and suit tractors from 15 to 35 horsepower. A cutter wider than the tractor can handle will bog down in thick growth, while a narrow cutter on a wide tractor leaves uncut strips beside the wheels.
A tow-behind mower suits owners whose tractor lacks a PTO shaft or a 3-point hitch. The Earthquake Acreage hitches to a 2-inch ball and offers 10 hitch height positions, with a tongue that adjusts to the tow vehicle. Remote control mowers suit steep or wet ground where walking behind a machine is unsafe: the AIWEIYA model climbs slopes up to 45 degrees, and the Tyzar model handles slopes up to 55 degrees. Check the slope rating in the manual before working any hill.
Compare the Main Types
| Type | Suits | Limit |
|---|---|---|
| PTO flail mower | Mulching material up to 0.75 inches across | Needs a tractor with a 540 RPM PTO shaft |
| Tow-behind rough cut mower | Saplings up to 3 inches thick in a 44-inch pass | Needs a tow vehicle with a 2-inch ball |
| Walk-behind string trimmer | Dense weeds on small plots | A 22-inch swath covers ground slowly |
| Remote control mower | Steep slopes, with listed ratings of 45 and 55 degrees | Heavy, from 330.0 to 793.0 pounds |
A flail mower and a rotary cutter are not the same tool, though each is called a brush hog. A flail mower uses rows of hammers, 24 on the MechMaxx 60-inch model and 20 on the 48-inch model, to shred growth into mulch. A rotary cutter uses heavy blades that swing away from rocks and stumps. For the differences between a mid-mount mower and a brush hog, see the mid-mount mower vs brush hog comparison. The brush and field mower guides cover the rest of the category.
Check the Build Before You Buy
Thick steel and guards mark a cutter built for rough ground. The Earthquake Acreage uses an 11-gauge steel deck with front and rear chain guards and steel wheel bumpers, and its break-away blades swing out of the way when they meet rocks or stumps. The MechMaxx flail mowers use front safety chains and sealed tapered roller bearings, with a kickstand for storage. Look at the deck sizes the maker supports: the tailwheel fork listed here fits 4 ft, 5 ft and 6 ft deck sizes, which shows how much deck widths vary across brands.
Cutting height range matters for rough ground. The Earthquake Acreage adjusts from 3.5 inches to 7.5 inches, the MechMaxx flail mowers cut from 0.6 inches to 1.8 inches above the ground, and the AIWEIYA remote mower adjusts from 2 to 15 cm. The SENIX walk-behind trimmer (on Amazon) offers 5 height settings from 1.57 inches to 3 inches. A low cut suits tidy edges; a high cut suits rough, uneven ground where blades must clear stones.
Plan the Upkeep
A brush hog needs blades, gear oil and grease over its life, and those running costs belong in the buying math. The brush hog blades roundup lists replacement blades, and the gear oil for brush hog roundup lists oils for the gearbox. Check the manual for the service schedule and the oil the maker names.
Warranty terms vary widely, so read them before buying. The Earthquake Acreage carries a 5-Year Limited Product Warranty and a 2-Year Limited Engine Warranty. The SENIX trimmer carries a 3-year limited warranty, the tailwheel fork carries a 36-month warranty, and the OMMUNICT walk-behind cutter (on Amazon) carries a 90-day warranty. A long warranty term does not change the cutting width or the power, but it does change the risk if a part fails early.
Safety
Wear eye and hearing protection and sturdy shoes. Clear sticks, stones and other debris before mowing, and keep children, pets and bystanders away from the work area. Refuel only with the engine off and cool. On slopes, follow the mower’s maximum slope rating, and do not mow wet growth on a hill.
FAQ: mowing large lots
How much is a brush hog for a small property?
The cost follows the type and the width, not the property alone. A walk-behind string trimmer suits small plots and yards, while a PTO cutter or a tow-behind mower suits larger ground. Match the cutter to the ground and the tractor, not to the acreage figure alone.
What size brush hog do I need for my tractor?
Match the deck width and the power demand to the tractor. The MechMaxx flail mowers suit tractors from 15 to 35 horsepower, with a 48-inch or a 60-inch deck and a 540 RPM PTO shaft. A tractor below the maker’s power range will struggle in thick growth, and a deck narrower than the tractor can leave uncut strips beside the wheels.
Can a brush hog cut saplings?
A rough cut mower can. The Earthquake Acreage clears saplings up to 3 inches thick in a 44-inch pass, and its break-away blades swing away from rocks and stumps. A flail mower mulches lighter material, up to 0.75 inches across on the MechMaxx models. Check the maker’s limit for the model, since thicker stems need a heavier cutter.
Do I need a tractor to run a brush hog?
Not always. PTO cutters need a tractor with a matching hitch and shaft. Tow-behind mowers bring their own engine, such as the 17.5-horsepower engine on the Earthquake Acreage, and remote control mowers run on their own engines, such as the 9-horsepower engine on the AIWEIYA model. Walk-behind trimmers need no tractor at all: the SENIX model uses a 160cc engine, and the OMMUNICT model uses a 52cc engine.
What upkeep does a brush hog need?
Blades wear, gearboxes need oil, and grease points need service on the maker’s schedule. Keep spare blades and the oil the manual names on hand, and check the warranty term at purchase: terms in the listings here run from a 90-day warranty to a 5-year limited product warranty.




