Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Does Stump Grinder Work and What Gear You Need

A PTO stump grinder spins a carbide-toothed wheel through the stump, grinding it to 6 inches below ground so the spot can be graded or sodded.

How Does Stump Grinder Work and What Gear You Need
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MechMaxx SG24PRO PTO Stump Grinder, 24 in FlywheelMechMaxx SG24PRO PTO Stump Grinder, 24 in Flywheel9.7/10View on Amazon
  2. 2MechMaxx PTO Stump Grinder, 24 in Flywheel, 34 TeethMechMaxx PTO Stump Grinder, 24 in Flywheel, 34 Teeth9.6/10View on Amazon
  3. 3BILT HARD TRG-1254 PTO Stump Grinder, 24 in FlywheelBILT HARD TRG-1254 PTO Stump Grinder, 24 in Flywheel9.6/10View on Amazon

A stump sits where the lawn, the garden bed or the new fence line needs to go, and digging it out by hand is slow work. How does stump grinder work? A cutting wheel covered in carbide teeth spins through the wood, shaving it into chips while the machine moves across the stump in shallow passes, until the stump sits below ground level and the spot can be graded or sodded. The grinders in this guide all run off a tractor PTO, so the tractor supplies the power and pulls the grinder through the stump.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

MechMaxx SG24PRO PTO Stump Grinder, 24 in Flywheel

MechMaxx SG24PRO PTO Stump Grinder, 24 in Flywheel

MechMaxx9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A PTO stump grinder with a 24-inch solid steel flywheel and 34 tungsten carbide teeth that grinds stumps to 6 inches below ground.

Who it's for: owners of 15-45 HP tractors who want a solid steel flywheel grinder for stumps and roots.

Who should skip it: anyone who needs a stated PTO speed or a stated weight.

MechMaxx lists the SG24PRO with a large 24-inch solid steel grinding flywheel and 34 tungsten carbide cutting teeth, for tractors with 15-45 HP at the PTO on a Category 1 3-point hitch. The listing says it grinds up to 6 inches below the ground to remove roots and prepare the ground for grading or grass, and works best on tractors with an independent PTO shaft. The title states 1 Years After-sales Service, and the listing gives dimensions of 29.0 by 37.0 by 38.0 inches.

Pros

  • 24-inch solid steel flywheel with 34 tungsten carbide teeth
  • Grinds to 6 inches below ground for grading or grass
  • Fits Category 1 3-point hitches on 15-45 HP tractors
  • 1-year after-sales service stated in the title

Cons

  • No PTO speed is stated
  • No weight is stated
  • No storage box or support leg is stated
  • No pass guidance is stated, unlike the BILT HARD listing
MechMaxx PTO Stump Grinder, 24 in Flywheel, 34 Teeth

MechMaxx PTO Stump Grinder, 24 in Flywheel, 34 Teeth

MechMaxx9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A PTO stump grinder with a 24-inch flywheel, 34 carbide teeth and a 1200 N·m max torque for 15-45 HP tractors.

Who it's for: owners of 15-45 HP tractors who want the stated torque figure and a storage box.

Who should skip it: anyone put off by the 6-feet claim in the bullets, or anyone who needs a support leg for storage.

MechMaxx lists a 24-inch flywheel with 34 tungsten carbide cutting teeth and 12 bonus teeth, a 540 RPM PTO input with 1200 N·m max torque, and a Category 1 3-point hitch for 15-45 HP tractors. The listing says it grinds to a 6-inch cutting depth and includes a storage box above the grinder, and the spec table states a 1-year warranty. The bullets also claim it removes roots up to 6 feet below ground level, which does not agree with the 6-inch cutting depth in the title.

Pros

  • 540 RPM PTO input with 1200 N·m max torque
  • 24-inch flywheel with 34 tungsten carbide teeth, plus 12 bonus teeth
  • Storage box above the grinder for instructions and small tools
  • 1-year warranty stated in the spec table

Cons

  • The bullets claim roots up to 6 feet below ground, against a 6-inch cutting depth
  • No support leg is stated
  • No chainsaw holder is stated
BILT HARD TRG-1254 PTO Stump Grinder, 24 in Flywheel

BILT HARD TRG-1254 PTO Stump Grinder, 24 in Flywheel

BILT HARD9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A PTO stump grinder with a 24-inch flywheel, 34 carbide teeth, a rear support leg and a chainsaw holder for 15-45 HP tractors.

Who it's for: owners who want a support leg, a storage capsule and a chainsaw holder with their grinder.

Who should skip it: anyone who wants a stated warranty term or stated dimensions.

BILT HARD lists a 24-inch flywheel with 34 tungsten carbide teeth, a Category 1 3-point hitch and a 540 RPM PTO shaft with a 1-3/8 inch 6-spline connection, for 15-45 HP tractors. The listing says it grinds stumps up to 6 inches below ground level and advises keeping each cutting pass to no more than 2 inches, working down until the stump and roots are 4 to 6 inches below ground level. The spec table lists product dimensions of 1.0 by 1.0 by 1.0 inches, which does not match a grinder with a 24-inch flywheel. No warranty term is stated.

Pros

  • 24-inch flywheel with 34 tungsten carbide teeth
  • Rear support leg keeps the grinder stable in storage
  • Storage capsule for the manual and tools, plus a chainsaw holder
  • Pass guidance: keep each cutting pass to no more than 2 inches

Cons

  • No warranty term is stated
  • No weight is stated
  • No torque figure is stated

How does stump grinder work: the cutting wheel

The cutting wheel is a 24-inch flywheel with carbide teeth around its edge. The tractor PTO spins the wheel, and the teeth cut the wood as the wheel moves across the stump. The grinders here use a 24-inch flywheel with 34 tungsten carbide teeth, and the wheel cuts down to 6 inches below ground level. Each tooth takes a small bite, so the wheel turns the stump into chips and sawdust.

The tractor and the PTO shaft

These grinders have no engine of their own. They mount on the tractor’s Category 1 3-point hitch and run off the PTO shaft, so the tractor supplies the power. The MechMaxx PTO Grinder and the BILT HARD list a 540 RPM PTO input, and all three list tractors of 15 to 45 HP. The grinder works best on tractors with an independent PTO, which lets you control the tractor speed separately from the PTO speed, since the tractor pulls the grinder through the stump.

Grinding in passes

A stump grinder does not cut the whole stump at once. The BILT HARD listing advises keeping each cutting pass to no more than 2 inches, working down until the stump and roots sit 4 to 6 inches below ground level. Move the wheel across the stump, lower it a little, and pass across again. The MechMaxx listings state the same 6-inch cutting depth, and the ground is then ready for grading. See our how to use a stump grinder guide for the full steps.

What to do with the chips and the hole

The wheel turns the stump into chips and sawdust, which the MechMaxx listing describes as decorative sawdust or coverings. Rake the chips level and seed or sod the patch. The BILT HARD listing states the same finish: grind until the stump and roots sit below ground level, then grade or sod the site.

The gear

The grinders below all mount on a Category 1 3-point hitch and run off the tractor PTO, so the power for the cutting wheel in the steps above comes from the tractor, and the choice comes down to torque, storage and the warranty term.

Safety

Wear eye and hearing protection and sturdy shoes, and clear sticks, stones and debris from the work area before you start. Keep children, pets and bystanders away from the work area, and keep clear of the cutting wheel while the PTO runs. Shut the PTO off and let the wheel stop before you step near the grinder.

FAQ: mowing large lots

How deep does a stump grinder grind?

The grinders here cut to 6 inches below ground level. The BILT HARD listing advises working down until the stump and roots sit 4 to 6 inches below ground level, which leaves the spot ready for grading or sodding.

What size tractor do I need for a PTO stump grinder?

The listings state tractors of 15 to 45 HP with a Category 1 3-point hitch. The MechMaxx PTO Grinder and the BILT HARD list a 540 RPM PTO shaft. The grinder works best on a tractor with an independent PTO, so you control the tractor speed separately from the PTO speed.

Does a stump grinder remove the roots too?

It grinds the stump and the roots down to 6 inches below ground level. The ground is then ready for grading, and the MechMaxx listing describes the chips as decorative sawdust or coverings.

Can a stump grinder work on any tree stump?

The MechMaxx PTO Grinder listing states it works in forestry, gardens, parks, orchards and plantations, and the BILT HARD listing states its 34-tooth flywheel gives consistent grinding performance across various types of stump.

How do I move the grinder between stumps?

The tractor pulls the grinder through the stump, so you drive the tractor to the next stump with the grinder carried on the 3-point hitch. The listings state the grinder works best with an independent PTO, so the tractor speed stays separate from the PTO speed while you move.

More mowing guides

See every walk-behind and robotic mower guide.

More buying guides

Walk-Behind and Robotic Mowers ·

Best Electric Lawn Mower for Hills (2026)

Five electric mowers for sloped yards, from a 21-inch 56V cordless with a 35-minute runtime to a 19-inch corded model, compared by deck, power,…

Walk-Behind and Robotic Mowers ·

Are Push Reel Mowers Any Good?

A push reel mower cuts cleanly on a small, flat lawn of fine grass mowed often, and turns into hard work on tall, wet…