Lawn Mower Deck Sizes and Cutting Width Chart
A plain guide to lawn mower deck sizes, common cutting widths, measuring, and matching a deck to your lawn and storage.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SENIX 21-Inch Gas Push Lawn Mower9.7/10View on Amazon - 2
PowerSmart EasyCut 18-Inch 144cc Gas Lawn Mower 4-Stroke OHV9.6/10View on Amazon - 3
CRAFTSMAN Electric Push Lawn Mower9.6/10View on Amazon
A lawn that takes all afternoon to mow usually comes down to the width of the strip the mower cuts on each pass. Lawn mower deck sizes set that width, so the deck decides how many passes a lawn needs, how the mower fits through gates and between beds, and how much room it needs in storage. This guide explains the common sizes, how to measure a deck, and how to match a deck to the shape of a lawn.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Lawn mower deck sizes: the common cutting widths
The deck is the housing under the mower that holds the blades, and its cutting width is the width of grass it cuts in a pass. Listings state deck sizes in inches, and the common widths in the reference listings run from a 21 inch walk-behind deck to 42 inch and 46 inch riding decks.
| Deck size | Mower type | Example from listings |
|---|---|---|
| 21 inch | Walk-behind | Cub Cadet deck assembly for SC500Z and SC500EZ walk-behind mowers |
| 42 inch | Riding mower or zero-turn | Deck shells and assemblies listed for Toro TimeCutter, Exmark Quest, Cub Cadet ZT1-42 and MTD mowers |
| 46 inch | Riding mower or zero-turn | Husqvarna deck housing listed for RZ4619, RZ4620 and related models |
See the walk behind mower sizes guide for walk-behind widths, the riding lawn mower sizes guide for riding widths, and the push lawn mower sizes guide for push mower widths.
How to measure a mower deck
Check the cutting width in the manual or listing first: it is the span the blades cover from tip to tip, with the engine off. Measuring the deck shell edge to edge gives the overall width, not the cutting width, because the housing extends past the span the blades cover. A 42 inch deck shell listed at 49.21 inches by 31.5 inches and a 42 inch deck shell listed at 47.64 inches by 28.74 inches show that shells of the same cutting width can still differ in shape and overall size. Check the manual for the cutting width when the listing gives shell dimensions only.
What size mower deck for 1 acre
For a lawn of 1 acre, a riding mower with a 42 inch deck or a 46 inch deck cuts a wide strip on each pass, so the lawn needs fewer passes than a walk-behind deck of 21 inch width. Open lawns suit the wider decks, while gates, trees, beds and tight turns suit a narrower deck that can pass through with less risk of scalping and less chance of clipping edges. A deck that fits the narrowest gate on the property matters more than the widest deck that fits the open lawn. See the best riding mower for 1 acre roundup for mowers sized for this acreage.
Deck size, weight and storage
Deck size also affects how much room the mower needs in a shed or garage, and deck parts vary in weight and shape. The Husqvarna 46 inch deck housing lists a weight of 55.0 pounds, while the Cub Cadet 21 inch deck assembly lists a weight of 14.85 pounds and dimensions of 24.5 inches by 23.75 inches by 8.25 inches. Measure the storage bay and the gate before choosing, and leave room to walk around the mower for blade work. Deck belts and covers also follow deck size: see the deck belt cover picks for 42 and 46 inch decks, and the best blade for lawn mower guide when matching blades to the deck.
Deck size and lawn shape
A wide deck suits open, flat lawns with long straight runs. A narrow deck suits lawns broken up by trees, beds, paths and uneven ground, where the mower turns often. Where the lawn mixes open ground with tight corners, the deck should fit the tightest spot the mower must pass, not the widest stretch of lawn. A deck that is wider than a gate means the mower stays outside, so measure every gate and gap on the route to the lawn before deciding.
FAQ: mowing large lots
What size mower deck for 1 acre?
A riding mower with a 42 inch deck or a 46 inch deck suits a lawn of 1 acre, cutting a wide strip on each pass. Where the lawn has narrow gates or many trees, a narrower deck may fit the property better even though it needs more passes.
How to measure a mower deck size?
Check the cutting width stated in the manual or listing: it is the span the blades cover from tip to tip. Measuring the shell edge to edge gives the overall width, which is wider than the cutting width, so compare the stated cutting width with the manual or listing rather than reading it off the shell.
Is a 42 inch deck the same as a 46 inch deck?
No. A 42 inch deck cuts a narrower strip than a 46 inch deck, and the decks fit different mowers, so check the fitment list before buying. The listings name 42 inch decks for Toro TimeCutter, Exmark Quest, Cub Cadet ZT1-42 and MTD mowers, and a 46 inch deck housing for Husqvarna RZ4619 (on Amazon) and RZ4620 models.
Does deck size affect storage?
Yes. A wider deck needs a wider storage bay and a wider gate, and deck assemblies vary in weight and shape. The Husqvarna 46 inch deck housing lists a weight of 55.0 pounds, and 42 inch deck shells list dimensions of 49.21 inches by 31.5 inches and 47.64 inches by 28.74 inches, so measure the shed and the gate before choosing.
What warranty comes with a replacement deck?
The Cub Cadet 21 inch deck assembly lists a warranty of 3 months. Other listings in the reference set state no warranty term, so check the listing for the deck being considered.




