Best Thread Locker for Engines (2026)
5 thread lockers for engine bolts, from 6 ml medium strength blue to 50 ml high strength red, compared by strength, size, set time and fastener range.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPermatex 25240 Orange9.5/10View on Amazon - 2
Best High StrengthRealth M263 Red9.5/10View on Amazon - 3
Best for Small MotorsLoctite 242 Blue9.4/10View on Amazon - 4
Best Medium StrengthPermatex 24200 Blue9.4/10View on Amazon - 5
Best Large BottleEPASUN M243 Blue9.4/10View on Amazon
A mower engine shakes, rattles and heats up every time it runs, and the bolts that hold it together feel all of it. Valve cover bolts, oil pan bolts and flywheel bolts can back out a little at a time until a leak or a rattle gives them away. The best thread locker for engines fills the threads, holds the bolt in place against vibration, and still lets a serviceable bolt come off with hand tools when the time comes. These formulas cover medium and high strength, blue and red, and small tubes alongside large bottles.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall Permatex 25240 Orange: Highest Acre Score here, with 3x the holding power of standard blue and a 36 ml bottle Check price on Amazon
- Best High Strength Realth M263 Red: 50 ml red formula with a stated 36 Nm breaking torque and a temperature range of -54°C to 180°C Check price on Amazon
- Best for Small Motors Loctite 242 Blue: Medium strength blue for 6 to 19 mm fasteners on small motors, mowers and power equipment Check price on Amazon
- Best Medium Strength Permatex 24200 Blue: Removable with hand tools, for 1/4 to 3/4 in bolts on valve covers, water pumps and oil pans Check price on Amazon
- Best Large Bottle EPASUN M243 Blue: 50 ml medium strength blue with a 10 minute initial set and a 24 hour full set Check price on Amazon
Our acreage picks

Permatex 25240 Orange High Strength Removable Threadlocker, 36 ml
High strength orange threadlocker in a 36 ml bottle, with 3x the holding power of standard blue, removable with hand tools.
Who it's for: owners who want high holding power with removal by hand tools.
Who should skip it: anyone who wants a stated set time.
The 25240 is the only high strength removable formula here, with 3x the holding power of standard blue on fasteners from 1/4 to 1 in. It names flywheel bolts and stator bolts. The spec table lists the color as Blue, Orange, Red while the title says orange.
Pros
- 3x the holding power of standard blue, still removable by hand tools
- 36 ml bottle gives more product than the 6 ml tubes here
- Lists engine fasteners by name: flywheel bolts, stator bolts and axle nuts
- Works on overhead and vertical fasteners, per the listing
Cons
- No set time or full set time is stated on the listing
- No warranty term is stated on the listing
- Hybrid orange sits between blue and red, so match strength to the bolt

Realth M263 Red High Strength Threadlocker, 50 ml
High strength red threadlocker, 50 ml, primerless and oil tolerant, with a stated 36 Nm breaking torque.
Who it's for: owners locking studs and bolts on motors and engines that stay put.
Who should skip it: anyone who needs to remove the fastener later, or anyone bonding plastic.
The M263 posts the strongest stated numbers here: a 36 Nm breaking torque, 400 to 600 mpa-s viscosity, and -54°C to 180°C. Initial set is 10 minutes and full set is 24 hours on steel. The listing calls it permanent locking and also says easy to disassemble.
Pros
- Stated 36 Nm breaking torque and 400 to 600 mpa-s viscosity
- Primerless and oil tolerant, for all metal substrates including stainless steel
- Temperature range of -54°C to 180°C stated on the listing
- 50 ml bottle, tied for the largest size here
Cons
- Stated for permanent locking, yet the listing also says easy to disassemble
- Not for plastics, especially thermoplastics that may cause stress cracking
- Bottle arrives more than 1/2 empty because the glue hardens without air
- No warranty term is stated on the listing

Loctite 242 Blue Medium Strength Threadlocker, 6 ml
Medium strength blue threadlocker, 6 ml, for 6 to 19 mm fasteners on small motors, mowers and power equipment.
Who it's for: owners who service mower and small engine bolts often.
Who should skip it: anyone locking a fastener for good, or anyone who wants a larger bottle.
The Loctite 242 is the most mower-focused listing here: it names small motors, mowers and power equipment, and covers 6 to 19 mm fasteners with a medium strength formula. It sets in 10 minutes and is fully set in 24 hours. The spec table lists size as 1 Pack while the title states 6 ml.
Pros
- Names small motors, mowers and power equipment directly
- Sets in 10 minutes, fully set in 24 hours, per the listing
- Removable with hand tools, so a fastener stays serviceable
- Protects from leaks, rust and corrosion, per the listing
Cons
- 6 ml tube, tied for the smallest size here
- No warranty term is stated on the listing
- Medium strength only, so it suits fasteners that come apart for service

Permatex 24200 Blue Medium Strength Threadlocker, 6 ml
Medium strength blue threadlocker, 6 ml, for 1/4 to 3/4 in bolts, including valve cover, water pump and oil pan bolts.
Who it's for: owners doing routine engine bolt work.
Who should skip it: anyone who wants a high strength hold or a stated set time.
The 24200 is a medium strength blue formula for 1/4 to 3/4 in bolts, and the listing names valve cover, water pump, oil pan and drive shaft bolts. It seals threads and comes off with hand tools.
Pros
- Names engine bolts directly: valve cover, water pump and oil pan bolts
- Removable with hand tools, so maintenance stays simple
- Seals threads and protects from corrosion, per the listing
- Medium strength for nut and bolt work from 1/4 to 3/4 in
Cons
- 6 ml tube, tied for the smallest size here
- The listing does not state a set time or a full set time
- No warranty term is stated on the listing
- Medium strength only, so it suits serviceable joints rather than permanent ones

EPASUN M243 Blue Medium Strength Threadlocker, 50 ml
Medium strength blue threadlocker, 50 ml, for nuts, bolts and fasteners, with a 10 minute initial set and a 24 hour full set.
Who it's for: owners who want a large bottle of removable blue threadlocker.
Who should skip it: anyone who wants an engine-specific listing, or a high strength hold.
The M243 is the large-bottle medium strength blue here: a 50 ml bottle that the listing says can be used for a long time without drying out or leaking. It sets initially in 10 minutes and fully in 24 hours, and comes off with basic hand tools. The listing names automotive, industrial and furniture use.
Pros
- 50 ml bottle in a medium strength that stays serviceable
- Sets initially in 10 minutes and fully in 24 hours, per the listing
- Resists water and rust, and resists heat, per the listing
- Removable with basic hand tools
Cons
- The listing does not state a fastener size range
- Furniture use sits outside mower and engine work
- No warranty term is stated on the listing
- No stated breaking torque or viscosity figure
Other machines to compare
Loctite 88442 Red 272 High Temperature/Strength Thread LockerCheck price on Amazon
ESKONKE Thread Locker Red 271Check price on Amazon
2 Pack Thread Locker Blue 243Check price on Amazon
ESKONKE Red Thread Locker 272 Nuts & Bolts Locker HighCheck price on Amazon
ESKONKE Red Thread Locker 271 Nuts & Bolts Locker HighCheck price on Amazon
Side-by-side specs
| Model | Acre Score | Strength | Size | Fastener range | Initial set | Full set | Removal |
|---|---|---|---|---|---|---|---|
| Permatex 25240 Orange | 9.5/10 | High, removable | 36 ml | 1/4 to 1 in | Not stated | Not stated | Hand tools and heat |
| Realth M263 Red | 9.5/10 | High, permanent | 50 ml | Not stated | 10 minutes | 24 hours | Easy to disassemble (stated) |
| Loctite 242 Blue | 9.4/10 | Medium, removable | 6 ml | 6 to 19 mm | 10 minutes | 24 hours | Hand tools |
| Permatex 24200 Blue | 9.4/10 | Medium, removable | 6 ml | 1/4 to 3/4 in | Not stated | Not stated | Hand tools |
| EPASUN M243 Blue | 9.4/10 | Medium, removable | 50 ml | Not stated | 10 minutes | 24 hours | Basic hand tools |
We report what each manufacturer rates on its listing, as gathered 1 November 2026.
Acreage and terrain fit
Permatex 25240 Orange
Realth M263 Red
Loctite 242 Blue
Permatex 24200 Blue
EPASUN M243 Blue
How the Acre Score works
The Acre Score weighs performance, build, value, safety and warranty: holding strength and fastener range, the formula and stated specs, size and strength for the class, and stated safety and warranty terms.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Permatex 25240 Orange | 9.5 | 32 | 21 | 21 | 0 | 0 |
| Realth M263 Red | 9.5 | 30 | 21 | 20 | 0 | 0 |
| Loctite 242 Blue | 9.4 | 29 | 21 | 19 | 0 | 0 |
| Permatex 24200 Blue | 9.4 | 29 | 20 | 19 | 0 | 0 |
| EPASUN M243 Blue | 9.4 | 28 | 19 | 20 | 0 | 0 |
Each score is a linear conversion of the weighted total onto the 9.2 and 9.8 bounds; more points move a pick up the scale.
Buying guide: the best thread locker for engines
Blue, orange or red
Blue means medium strength and removable with hand tools. Orange sits between blue and red: the Permatex 25240 states high strength with removal by hand tools. Red means high strength and, for the Realth M263, permanent locking. Match the color to the bolt: a bolt that comes apart for service wants blue or orange, while a stud that stays put suits red. See the anti-seize vs thread locker guide for fasteners that need frequent removal.
Strength and fastener range
Strength matters less than fit: a medium strength blue on the right size bolt holds better than a high strength red on the wrong one. The listings state fastener ranges of 1/4 to 3/4 in, 1/4 to 1 in and 6 to 19 mm, so check the bolt size before you buy.
Size: small tube or large bottle
The 6 ml tubes suit a few bolts at a time, while the 50 ml bottles suit a shelf of engine work. The EPASUN listing says its 50 ml bottle can be used for a long time without drying out or leaking.
Plastic parts need care
Thread locker is made for metal fasteners, and the Realth M263 listing warns against use on plastics, especially thermoplastics that may cause stress cracking. Check the listing before using any thread locker near plastic, and confirm compatibility with the bonding material first, as the Realth listing recommends.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- A 6 ml tube fits a toolbox drawer and covers occasional bolt work on a mower engine.
- A 50 ml bottle suits a shop shelf where several engines get regular attention.
- Medium strength formulas come off with hand tools, so bolts that need regular adjustment stay serviceable.
- Red high strength formulas suit fasteners that stay put, so keep them for the shop bench.
FAQ: mowing large lots
What is thread locker?
Thread locker is a liquid that fills the threads of a nut and bolt, then holds the fastener against shock and vibration. The listings describe it as a sealant that locks threads and protects them from corrosion.
How does thread locker work?
It fills the gaps between the threads and holds the fastener so vibration cannot back it out. A medium strength formula still lets the bolt come off with hand tools, while a high strength red holds a fastener for good.
How long does thread locker take to set?
The Realth M263, the Loctite 242 and the EPASUN M243 each state an initial set of 10 minutes and a full set of 24 hours. The Permatex listings state no set time.
How much thread locker to use?
The Permatex 25240 listing says to apply a few drops to the bolt engagement area and assemble. A few drops coats the threads, so start small and add only what the bolt needs.
Does thread locker work on plastic?
Not every formula does. The Realth M263 listing says it should not be used on plastics, especially thermoplastics that may cause stress cracking, and recommends confirming compatibility with the bonding material first.
More mowing guides
- Anti Seize vs Thread Locker: Which One Should You Buy?
- Best Synthetic Oil for Riding Mower (2026)
- Best Engine Oil for Pressure Washer (2026)
- Best Spark Plug for Briggs and Stratton (2026): 5 Plugs Compared
- Horizontal vs Vertical Shaft Engine: Which Should You Buy?
- Honda vs Kohler Engine: Which One Should You Buy?
- Best Mower Maintenance Kit for Beginners (2026): 5 Kits Compared
- Spark Plug Problems: Signs and Fixes
- How to Check Spark Plug on a Lawn Mower
- Best Magnetic Spark Plug Socket Set (2026): 5 Picks for Mower Plugs
- Riding Mower Maintenance: Step-by-Step Care Guide




